ASTM E 3047 : 2022
Current
The latest, up-to-date edition.
Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
Hardcopy , PDF
English
08-12-2022
Committee |
E 01
|
DocumentType |
Test Method
|
Pages |
15
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This method describes the spark atomic emission spectrometric (Spark-AES) analysis of nickel alloys, such as those specified by Committee B02, having chemical compositions within the following limits:
Element | Application Range (Mass Fraction, %) |
Aluminum | 0.005-6.00 |
Boron | 0.001-0.10 |
Carbon | 0.005-0.15 |
Chromium | 0.01-33.00 |
Copper | 0.01-35.00 |
Cobalt | 0.01-25.00 |
Iron | 0.05-55.00 |
Magnesium | 0.001-0.020 |
Manganese | 0.01-1.00 |
Molybdenum | 0.01-35.00 |
Niobium | 0.01-6.0 |
Nickel | 25.00-100.0 |
Phosphorous | 0.001-0.025 |
Silicon | 0.01-1.50 |
Sulfur | 0.0001-0.01 |
Titanium | 0.0001-6.0 |
Tantalum | 0.01-0.15 |
Tin | 0.001-0.020 |
Tungsten | 0.01-5.0 |
Vanadium | 0.0005-1.0 |
Zirconium | 0.01-0.10 |
1.2The following elements may be determined using this method.
Element | Quantification Range (Mass Fraction, %) |
Aluminum | 0.010-1.50 |
Boron | 0.004-0.025 |
Carbon | 0.014-0.15 |
Chromium | 0.09-20.0 |
Cobalt | 0.05-14.00 |
Copper | 0.03-0.6 |
Iron | 0.17-20 |
Magnesium | 0.001-0.03 |
Manganese | 0.04-0.6 |
Molybdenum | 0.07-5.0 |
Niobium | 0.02-5.5 |
Phosphorous | 0.005-0.020 |
Silicon | 0.07-0.6 |
Sulfur | 0.002-0.005 |
Tantalum | 0.025-0.15 |
Tin | 0.001-0.02 |
Titanium | 0.025-3.2 |
Tungsten | 0.02-0.10 |
Vanadium | 0.005-0.25 |
Zirconium | 0.01-0.05 |
1.3This method has been interlaboratory tested for the elements and quantification ranges specified in 1.2. The ranges in 1.2 indicate intervals within which results have been demonstrated to be quantitative. It may be possible to extend this method to other elements or different composition ranges provided that a method validation study as described in Guide E2857 is performed and that the results of this study show that the method extension is meeting laboratory data quality objectives. Supplemental data on other elements not included in the scope are found in the supplemental data tables of the Precision and Bias section.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard statements are given in Section 9.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1257 : 2016 | Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2024 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 1257 : 2016 : R2024 | Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.