![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 3100 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for Acoustic Emission Examination of Concrete Structures
Hardcopy , PDF
23-12-2022
English
09-06-2017
CONTAINED IN VOL. 01.08, 2017 Specifies the application of acoustic emission (AE) technology for examination of concrete and reinforced concrete structures during or after construction, or in service.
Committee |
E 07
|
DocumentType |
Guide
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This guide describes the application of acoustic emission (AE) technology for examination of concrete and reinforced concrete structures during or after construction, or in service.
1.2Structures under consideration include but are not limited to buildings, bridges, hydraulic structures, tunnels, decks, pre/post-tensioned (PT) structures, piers, nuclear containment units, storage tanks, and associated structural elements.
1.3AE examinations may be conducted periodically (short-term) or monitored continuously (long-term), under normal service conditions or under specially designed loading procedures. Examples of typical examinations are the detection of growing cracks in structures or their elements under normal service conditions or during controlled load testing, long term monitoring of pre-stressed cables, and establishing safe operational loads.
1.4AE examination results are achieved through detection, location, and characterization of active AE sources within concrete and reinforced concrete. Such sources include micro- and macro-crack development in concrete due to loading scenarios such as fatigue, overload, settlement, impact, seismicity, fire and explosion, and also environmental effects such as temperature gradients and internal or external chemical attack (such as sulfate attack and alkali-silica reaction) or radiation. Other AE source mechanisms include corrosion of rebar or other metal parts, corrosion and rupture of cables in pre-stressed concrete, as well as friction due to structural movement or instability, or both.
1.5This guide discusses selection of the AE apparatus, setup, system performance verification, detection and processing of concrete damage related AE activity. The guide also provides approaches that may be used in analysis and interpretation of acoustic emission data, assessment of examination results and establishing accept/reject criteria.
1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ACI 228.2R : 2013 | REPORT ON NONDESTRUCTIVE TEST METHODS FOR EVALUATION OF CONCRETE IN STRUCTURES |
ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
ACI 437R : 2003 | STRENGTH EVALUATION OF EXISTING CONCRETE BUILDINGS |
ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1932 : 1997 : R2002 : EDT 1 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
NAS410:2003 | NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL |
ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1932 : 2012 : R2022 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
ASTM E 1932 : 2007 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 2374 : 2016 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
ASTM E 543 : 2015 : REDLINE | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1932 : 2012 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 2374 : 2004 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM E 2374 : 2015 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 2374 : 2010 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 2374 : 2016 : REDLINE | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 2374 : 2016 : R2021 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.