ASTM E 340 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Macroetching Metals and Alloys
Available format(s)
PDF
Superseded date
25-11-2023
Superseded by
Language(s)
English
Published date
23-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.01, 2015 Specifies the methods of macroetching metals and alloys to reveal their macrostructure.
| Committee |
E 04
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1These procedures describe the methods of macroetching metals and alloys to reveal their macrostructure.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.2, 7.1, 8.1.3, 8.2.1, 8.8.3, 8.10.1.1, and 8.13.2.
| ASTM A 608/A608M : 2014 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
| SAE AS7460C | Bolts and Screws, Titanium Alloy 6.0Al - 4.0V Procurement Specification For |
| SAE USCAR8-2 | GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 08/30176215 DC : DRAFT JAN 2008 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| MIL-F-71131 Base Document:1992 | FIN, MORTAR CARTRIDGE: M32 |
| NACE TM 04 98 : 2014 | EVALUATION OF THE CARBURIZATION OF ALLOY TUBES USED FOR ETHYLENE MANUFACTURE |
| ASTM A 983/A983M : 2006 : R2011 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| MIL-F-48076 Revision A:1984 | FIN, ASSEMBLY, M158 |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASTM A 988/A988M : 2017 : REDLINE | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| QQ N 00286 : F | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL-STD-1895 Revision B:1998 | RADIOGRAPHIC REFERENCE STANDARDS AND RADIOGRAPHIC PROCEDURES FOR PARTIAL-PENETRATION ALUMINUM WELDS |
| ASTM A 983/A983M : 2006 : R2016 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| AWS C1.1M/C1.1 : 2012 | RECOMMENDED PRACTICES FOR RESISTANCE WELDING |
| SAE AS7471H | Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification |
| ASTM F 541 : 2012 : REDLINE | Standard Specification for Alloy Steel Eyebolts |
| SAE AMS5643V | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
| ASTM A 983/A983M : 2006 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| I.S. EN 14870-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
| MIL P 71038 : 0 | |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| ASTM E 1077 : 2014 : REDLINE | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 872/A872M : 2014 : REDLINE | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
| MIL-F-14888 Revision A:1981 | FIN ASSEMBLY, XM170 |
| SAE MA1784 | Spacers and Washers, Procurement Specification For, Metric |
| MIL-S-48084 Revision A:1981 | STRIKER NUT ASSEMBLY FOR 4.2 INCH AMMUNITION |
| SAE USCAR8-3 | Grain Flow Pattern for Bolts, Screws, and Studs |
| AWWA C303 : 2017 | CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
| ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
| ASTM F 788 : 2013-04 | SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES |
| ASTM A 521 : 2003 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| UNI EN 14870-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| MIL-S-46119 Revision C:1988 | Steel Forgings, Tubular Parts for Cannon |
| ASTM E 1180 : 2008 : R2014 | Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| MIL-S-11310 Revision E:1976 | Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion |
| MIL-HDBK-1941 Base Document:1998 | METAL-ARC WELDING OF HOMOGENEOUS ARMOR |
| SAE USCAR 8 : REV 3 - 2013 | GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS |
| MIL F 71037 : NOTICE 2 | FIN ASSEMBLY, MORTAR CARTRIDGE |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| AWWA C220 : 2017 | STAINLESS-STEEL PIPE, 1/2 IN. (13 MM) AND LARGER |
| ASTM A 521/A521M : 2006 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| ASTM A 781/A781M : 2018-02 | SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE |
| ASTM E 2014 : 2017 : REDLINE | Standard Guide on Metallographic Laboratory Safety |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
| SAE AMS5612J | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed |
| MIL-STD-1894 Revision B:1998 | RADIOGRAPHIC REFERENCE STANDARDS AND RADIOGRAPHIC PROCEDURES FOR PARTIAL-PENETRATION STEEL WELDS |
| MIL-DTL-32261 Base Document:2007 | CASE CARTRIDGE, 105 MM, M14 AND M217 |
| MIL-R-10185 Revision E:1992 | RING, BREECH, STEEL FORGINGS FOR |
| ASTM E 1180 : 2008 | Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation |
| SAE AMSS11310B | Steel Bars, Carbon, Hot Rolled, for Cold Shaping, Including Cold Extrusion |
| ASTM A 983/A983M : 2006 : R2011 : EDT 1 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
| ASTM A 766/A766M : 1987 | Specification for Forgings |
| 16/30336547 DC : 0 | BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE |
| SAE AMS4313E | Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved |
| SAE AS7461D | Bolts and Screws, Titanium Alloy 6Al-4V, UNS R56400 Fatigue-Rated, Procurement Specification For |
| ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ASTM A 521/A521M : 2006 : R2016 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use (Withdrawn 2018) |
| ASTM A 608/A608M : 2014 : R2018 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN 14870-1:2011 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
| ASTM A 989/A989M : 2018 : REDLINE | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| DOD-C-24676 Base Document:1987 | COPPER-NICKEL ALLOY BAR, ROD AND FORGED SHAPES, HIGH STRENGTH (METRIC) |
| MIL-S-10520 Revision D:1975 | STEEL, FORGING, FOR PROJECTILE STOCK |
| 17/30358601 DC : 0 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
| MIL-S-46172 Revision A:1984 | STEEL FORGINGS |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| MIL-T-24766 Base Document:1992 | TITANIUM FORGINGS & FORGING STOCK, HIGH QUALITY FOR SHIPS SERVICE |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| ISO 4969:2015 | Steel Etching method for macroscopic examination |
| ASTM A 778/A778M : 2016 : REDLINE | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM A 521/A521M : 2006 : R2011 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.