ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
ASTM D 3648 : 2004 : R2011
|
Standard Practices for the Measurement of Radioactivity |
ASTM E 1245 : 2003
|
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
ASTM F 2393 : 2010
|
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
ASTM B 90/B90M : 2015 : REDLINE
|
Standard Specification for Magnesium-Alloy Sheet and Plate |
ASTM B 80 : 2015 : REDLINE
|
Standard Specification for Magnesium-Alloy Sand Castings |
SAE AMS 2248 : 2016
|
CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
ASTM E 1441 : 2000 : R2005
|
Standard Guide for Computed Tomography (CT) Imaging |
ASTM A 262 : 2015 : REDLINE
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
ASTM E 1382 : 1997 : R2015
|
Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
ASTM E 8/E8M : 2016 : REV A : EDT 1
|
Standard Test Methods for Tension Testing of Metallic Materials |
ISO 4967:2013
|
Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
ASTM E 2627 : 2013 : REDLINE
|
Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
ASTM E 1245 : 1995
|
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
ASTM F 2052 : 2006 : EDT 1
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM F 2213 : 2002
|
Standard Test Method for Measurement of Magnetically Induced Torque on Passive Implants in the Magnetic Resonance Environment |
ASTM F 2182 : 2002
|
Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging |
SAE AMS 2630 : 2010
|
INSPECTION, ULTRASONIC, PRODUCT OVER 0.5 INCH (12.7 MM) THICK |
ASTM F 2213 : 2006 : R2011
|
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
ASTM E 8/E8M : 2021
|
Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 1441 : 2019
|
Standard Guide for Computed Tomography (CT) |
SAE AMS 2632 : 1995
|
INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
ASTM F 2213 : 2006
|
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
ASTM E 1245 : 2003 : R2008
|
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
ASTM F 2182 : 2019 : EDT 1
|
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging |
ASTM A 342/A342M : 2014
|
Standard Test Methods for Permeability of Weakly Magnetic Materials |
ASTM F 2229 : 2012
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM E 29 : 2002
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 45 : 1997 : EDT 2
|
Standard Test Methods for Determining the Inclusion Content of Steel |
ISO 3116:2007
|
Magnesium and magnesium alloys Wrought magnesium alloys |
ISO/TR 37137:2014
|
Cardiovascular biological evaluation of medical devices — Guidance for absorbable implants |
ASTM F 2393 : 2012 : R2016
|
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
ASTM A 262 : 2001
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
ASTM D 3648 : 2014 : REDLINE
|
Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
ASTM F 2182 : 2019 : EDT 2
|
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging |
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials |
ASTM F 2229 : 2021
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM F 2229 : 2020
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
ASTM E 340 : 2015 : REDLINE
|
Standard Practice for Macroetching Metals and Alloys |
ISO 13485:2016
|
Medical devices Quality management systems Requirements for regulatory purposes |
ASTM D 3648 : 2014
|
Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
ASTM E 2627 : 2013 : R2019
|
Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
ASTM D 3648 : 2003
|
Standard Practices for the Measurement of Radioactivity |
ASTM F 2119 : 2007
|
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
ASTM D 3648 : 2004
|
Standard Practices for the Measurement of Radioactivity |
ASTM F 2052 : 2002
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM F 2229 : 2012 : REDLINE
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM E 2627 : 2013
|
Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
ASTM B 953 : 2013 : REDLINE
|
Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis |
ASTM F 2182 : 2019
|
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging |
ASTM F 2393 : 2012
|
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
ASTM F 2902 : 2016
|
Standard Guide for Assessment of Absorbable Polymeric Implants |
ASTM E 2627 : 2010
|
Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
ASTM F 2229 : 2002
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM B 69 : 2016 : REDLINE
|
Standard Specification for Rolled Zinc |
ASTM F 2229 : 2007
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM F 2393 : 2004
|
Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
IEEE/ASTM SI_10-2010
|
American National Standard for Metric Practice |
ASTM F 2119 : 2001
|
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
ASTM E 1382 : 1997 : R2004
|
Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
ASTM B 557M : 1994
|
Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric] |
ASTM D 3648 : 1995
|
Standard Practices for the Measurement of Radioactivity |
ISO/TS 17137:2014
|
Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants |
ASTM F 2052 : 2014
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM F 629 : 2015 : REDLINE
|
Standard Practice for Radiography of Cast Metallic Surgical Implants |
ASTM F 2213 : 2004
|
Standard Test Method for Measurement of Magnetically Induced Torque on Passive Implants in the Magnetic Resonance Environment |
ISO 10993-18:2005
|
Biological evaluation of medical devices Part 18: Chemical characterization of materials |
ISO 13067:2011
|
Microbeam analysis Electron backscatter diffraction Measurement of average grain size |
ISO/TS 10993-19:2006
|
Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
ASTM F 2052 : 2015 : REDLINE
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM F 2119 : 2007 : R2013
|
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants (Withdrawn 2022) |
ASTM F 2052 : 2006
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM E 1245 : 2000
|
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
ASTM E 1441 : 2011 : REDLINE
|
Standard Guide for Computed Tomography (CT) Imaging |
ASTM F 2581 : 2012 : R2017
|
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
ASTM F 2213 : 2017 : REDLINE
|
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
ASTM B 557M : 2015 : REDLINE
|
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
ASTM E 536 : 2016 : REDLINE
|
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
ISO 10993-17:2002
|
Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances |
ASTM F 2182 : 2009
|
Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging |
ASTM F 2213 : 2017
|
Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
ISO 3815-1:2005
|
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry |
ASTM E 1382 : 1997 : R2010
|
Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
ASTM F 2052 : 2015
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
ASTM E 1441 : 2011
|
Standard Guide for Computed Tomography (CT) Imaging |
ASTM F 2902 : 2016 : EDT 1
|
Standard Guide for Assessment of Absorbable Polymeric Implants |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size |
ASTM B 199 : 2017 : REDLINE
|
Standard Specification for Magnesium-Alloy Permanent Mold Castings |
ASTM F 2581 : 2007
|
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
ASTM B 107/B107M : 2013 : REDLINE
|
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
ASTM E 290 : 2014 : REDLINE
|
Standard Test Methods for Bend Testing of Material for Ductility |
ISO 24173:2009
|
Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction |
ASTM E 1382 : 1997
|
Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
ASTM E 1245 : 2003 : R2016
|
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
ASTM A 342/A342M : 2014 : REDLINE
|
Standard Test Methods for Permeability of Weakly Magnetic Materials |
ASTM A 555/A555M : 2016 : REDLINE
|
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
ASTM F 2581 : 2012
|
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
ASTM A 342/A342M : 2021
|
Standard Test Methods for Permeability of Weakly Magnetic Materials |
ASTM F 2902 : 2012
|
Standard Guide for Assessment of Absorbable Polymeric Implants |
ASTM B 661 : 2012 : REDLINE
|
Standard Practice for Heat Treatment of Magnesium Alloys |
ASTM F 2182 : 2011 : REV A
|
Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging |
ASTM B 403 : 2012 : REDLINE
|
Standard Specification for Magnesium-Alloy Investment Castings |
ISO 3815-2:2005
|
Zinc and zinc alloys Part 2: Analysis by inductively coupled plasma optical emission spectrometry |
ASTM E 354 : 2014 : REDLINE
|
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
ISO 16220:2017
|
Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
ASTM F 2052 : 2000
|
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Passive Implants in the Magnetic Resonance Environment |
ASTM E 8/E8M : 2016-09
|
TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
ASTM E 1441 : 2000
|
Standard Guide for Computed Tomography (CT) Imaging |
ASTM B 954 : 2015 : REDLINE
|
Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry |
ASTM F 2182 : 2002 : REV A
|
Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging |