ASTM E 50 : 2017 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Available format(s)
PDF
Superseded date
19-07-2024
Superseded by
Language(s)
English
Published date
01-09-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.05, 2017 Describes laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM.
| Committee |
E 01
|
| DocumentType |
Redline
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1These practices cover laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM. Detailed descriptions of recommended apparatus and detailed instructions for the preparation of standard solutions and certain nonstandardized reagents will be found listed or specified in the individual methods of analysis. Included here are general recommendations on the purity of reagents and protective measures for the use of hazardous reagents.
1.2These recommendations are intended to apply to the ASTM methods of chemical analysis of metals when definite reference is made to these practices, as covered in Section 4.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 8.
Note 1:The use of the verb “shall” (with its obligatory third person meaning) in this standard has been confined to those aspects of laboratory safety where regulatory requirements are known to exist. Such regulations, however, are beyond the scope of these practices.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1587 : 2017 : REDLINE | Standard Test Methods for Chemical Analysis of Refined Nickel |
| ASTM E 1835 : 2014 : REDLINE | Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry |
| ASTM A 309 : 2001 : R2012 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test (Withdrawn 2015) |
| ASTM E 2296 : 2003 | Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
| ASTM C 1271 : 1999 : R2012 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
| ASTM E 53 : 2007 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry |
| ASTM E 508 : 2013 : REDLINE | Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry |
| ASTM A 922 : 2005 : R2015 | Standard Specification for Silicon Metal |
| ASTM C 458 : 1998 : R2002 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM E 118 : 1989 : R2004 | Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys (Withdrawn 2010) |
| ASTM B 712 : 1993 : R2012 | Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials (Withdrawn 2015) |
| ASTM B 712 : 1993 : R1999 | Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials |
| ASTM C 1271 : 1999 : R2006 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
| ASTM E 536 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM B 170 : 1999 : R2015 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM E 396 : 2017 : REDLINE | Standard Test Methods for Chemical Analysis of Cadmium |
| ASTM E 1097 : 2012 : R2017 | Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry |
| ASTM E 1568 : 2013 : REDLINE | Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry |
| ASTM E 1805 : 2013 : REDLINE | Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry |
| ASTM E 315 : 2004 | Standard Test Methods for Chemical Analysis of Molybdenum (Withdrawn 2010) |
| ASTM E 2050 : 2017 : REDLINE | Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion |
| ASTM E 314 : 2016 : REDLINE | Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques |
| ASTM E 362 : 1999 | Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese (Withdrawn 2005) |
| ASTM E 2575 : 2008 | Standard Test Method for Determination of Oxygen in Copper and Copper Alloys (Withdrawn 2017) |
| ASTM E 3061 : 2017 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
| ASTM E 400 : 2002 | Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy (Withdrawn 2007) |
| ASTM E 364 : 1994 : R2000 | Standard Test Methods for Chemical Analysis of Ferrochrome-Silicon (Withdrawn 2006) |
| ASTM E 371 : 2000 | Standard Test Method for the Determination of Boron in Ferroboron (Withdrawn 2006) |
| ASTM E 2972 : 2015 | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM E 1659 : 2012 : REDLINE | Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
| ASTM E 194 : 2010 | Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
| ASTM E 416 : 1998 | Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory |
| ASTM E 1937 : 2004 | Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique (Withdrawn 2005) |
| ASTM E 194 : 2010 : R2015 | Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
| ASTM E 2626 : 2008 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals |
| ASTM B 216 : 2016 : REDLINE | Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes |
| ASTM E 360 : 1996 : R2001 | Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon (Withdrawn 2006) |
| ASTM B 298 : 2012 : R2017 | Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
| ASTM E 1452 : 1992 : R1996 | Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis (Withdrawn 2005) |
| ASTM E 2293 : 2003 | Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury |
| ASTM E 2594 : 2009 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 2594 : 2009 : R2014 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| ASTM B 604 : 1991 : R2015 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM C 816 : 2015 : REDLINE | Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method |
| ASTM E 1031 : 1996 | Standard Test Method for Analysis of Iron-Making and Steel-Making Slags by X-Ray Spectrometry (Withdrawn 2002) |
| ASTM B 712 : 1993 : R2006 | Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials |
| ASTM E 1724 : 1995 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| ASTM E 31 : 1985 : R1989 | Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995) |
| ASTM B 604 : 1991 : R2008 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| ASTM E 1898 : 2013 : REDLINE | Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM E 1277 : 2014 : REDLINE | Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
| ASTM C 458/C458M : 1998 : R2011 : EDT 1 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM B 170 : 1999 : R2004 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM E 1600 : 2015 : REDLINE | Standard Test Methods for Determination of Gold in Cyanide Solutions |
| ASTM D 3610 : 2000 : R2004 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM E 2294 : 2003 | Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
| ASTM D 4042 : 1993 : R1998 | Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| ASTM E 2824 : 2011 | Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method |
| ASTM E 1184 : 2010 | Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1852 : 2013 : REDLINE | Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM B 298 : 2012 | Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
| ASTM E 1941 : 2010 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM E 121 : 1983 : R2004 | Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys (Withdrawn 2010) |
| ASTM E 146 : 1983 | Methods of Chemical Analysis of Zirconium and Zirconium Alloys (Silicon, Hydrogen, and Copper) (Withdrawn 1989) |
| ASTM E 2293 : 2003 : R2013 | Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury |
| ASTM E 106 : 1983 : R1996 | Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys |
| ASTM E 361 : 1999 | Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese (Withdrawn 2005) |
| ASTM B 170 :1999 | Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 316 : 2017 : REDLINE | Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry |
| ASTM B 170 : 1999 : R2010 : EDT 1 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM D 3610 : 2000 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM E 117 : 1964 : R1989 | Method for Spectrographic Analysis of Pig-Lead by the Point-To-Plane Technique (Withdrawn 1995) |
| ASTM E 363 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
| ASTM B 248 : 2017 : REDLINE | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM E 278 : 2001 : R2010 : EDT 1 | Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
| ASTM E 2295 : 2013 : REDLINE | Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
| ASTM E 2294 : 2003 : R2008 : EDT 1 | Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry |
| ASTM E 278 : 2001 | Standard Test Method for the Determiniation of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
| ASTM E 342 : 2011 | Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry |
| ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 30 : 1989 | Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995) |
| ASTM E 378 : 1997 | Standard Test Method for Spectrographic Analysis of Silver by the Powder Technique (Withdrawn 2004) |
| ASTM D 1394 : 1976 : R2003 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
| ASTM E 56 : 1990 | Test Method for Chemical Analysis of Silver Brazing Alloys (Withdrawn 1994) |
| ASTM B 456 : 2017 : REDLINE | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASTM D 1394 : 1976 : R1999 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
| ASTM E 278 : 2001 : R2005 | Standard Test Method for the Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
| ASTM E 1446 : 2013 : REDLINE | Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry |
| ASTM E 1552 : 2015 : REDLINE | Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry |
| ASTM C 458 : 1998 : R2006 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM E 1024 : 1997 | Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry |
| ASTM E 1691 : 1995 | Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM C 458 : 1998 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM E 1724 : 1995 : R2001 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
| ASTM E 421 : 1988 | TEST METHOD FOR SPECTROGRAPHIC DETERMINATION OF SILICON AND ALUMINUM IN HIGH-PURITY IRON |
| ASTM E 2293 : 2003 : R2008 : EDT 1 | Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury |
| ASTM E 945 : 2012 : REDLINE | Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry |
| ASTM E 247 : 2001 : R2005 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
| ASTM B 170 : 1999 : R2010 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM D 1394 : 1976 : R2009 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
| ASTM E 35 : 1988 : R1997 | Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
| ASTM E 1447 : 2009 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 414 : 1983 : R1987 | Method for Spetrographic Analysis of Copper by the Briquet Technique |
| ASTM E 1335 : 2008 | Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis |
| ASTM D 4042 : 1993 : R2003 : EDT 1 | Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM E 37 : 2005 | Standard Test Methods for Chemical Analysis of Pig Lead |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM E 478 : 2008 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM E 465 : 2011 | Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry |
| ASTM C 760 : 1990 : R2002 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
| ASTM E 372 : 2013 : REDLINE | Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration |
| ASTM E 106 : 1983 : R2004 | Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys (Withdrawn 2011) |
| ASTM E 247 : 2001 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
| ASTM E 465 : 2011 : R2017 | Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry |
| ASTM B 604 : 1991 : R1997 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| ASTM E 62 : 1989 : R1996 | Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) |
| ASTM E 360 : 1996 | Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon |
| ASTM E 815 : 2017-07 | TEST METHOD FOR DETERMINATION OF CALCIUM FLUORIDE IN FLUORSPAR BY EDTA COMPLEXOMETRIC TITRIMETRY |
| ASTM E 246 :2010 | Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM D 3610 : 2000 : R2015 | Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM D 4042 : 1993 : R2014 | Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| ASTM E 53 : 2007 : R2013 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022) |
| ASTM E 367 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Ferroniobium |
| ASTM E 2296 : 2003 : R2008 : EDT 1 | Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
| ASTM B 368 : 2009 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM E 439 : 2017 : REDLINE | Standard Test Methods for Chemical Analysis of Beryllium |
| ASTM E 2792 : 2013 : REDLINE | Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion |
| MIL-I-706 Revision A:1962 | IRON OXIDE, FERRIC, RED DRY [NATURAL AND SYNTHETIC] |
| ASTM C 458 : 1998 : R2002 : EDT 1 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM C 146 : 1994 : REV A : R1999 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM E 120 : 2000 | Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003) |
| ASTM E 486 : 1973 : R1987 | Method for Spectrographic Analysis of Admiralty Metal by the Cast Pin and Point-To-Plane Techniques |
| ASTM E 1691 : 1995 : R2001 | Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories (Withdrawn 2007) |
| ASTM E 248 : 2012 : REDLINE | Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry |
| ASTM E 75 : 1976 : R2004 | Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys (Withdrawn 2010) |
| ASTM E 2294 : 2003 : R2013 | Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry |
| ASTM B 115 : 2010 : R2016 | Standard Specification for Electrolytic Copper Cathode |
| ASTM E 278 : 2001 : R2015 : EDT 1 | Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
| ASTM F 1277 : 2002 | Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique |
| ASTM E 118 : 1989 : R1996 | Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys |
| ASTM E 507 : 2013 : REDLINE | Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry |
| ASTM E 247 : 2001 : R2015 : EDT 1 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
| SAE AMS2280C | Trace Element Control Nickel Alloy Castings |
| ASTM E 35 : 1988 : R2002 | Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys (Withdrawn 2008) |
| ASTM E 62 : 1989 : R2004 | Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010) |
| ASTM D 4589 : 1996 | Standard Test Method for Nitrobenzene in Aniline (Withdrawn 2002) |
| ASTM E 1097 : 2012 | Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry |
| ASTM E 2296 : 2003 : R2013 | Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry |
| ASTM E 395 : 2002 | Standard Test Method for Determination of Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration (Withdrawn 2007) |
| ASTM C 169 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass |
| ASTM A 922 : 2005 : R2010 | Standard Specification for Silicon Metal |
| ASTM D 2674 : 1972 : R2004 : EDT 1 | Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
| ASTM D 1394 : 1976 : R2014 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
| ASTM D 2674 : 1972 : R1998 | Standard Test Methods for Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
| ASTM E 38 : 1985 | Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989) |
| ASTM E 1941 : 2010 : R2016 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM F 314 : 1970 : R1980 | Methods of Test for Identification of Metallic and Fibrous Contaminants in Aerospace Fluids (Withdrawn 1990) |
| ASTM B 604 : 1991 | SPECIFICATION FOR DECORATIVE ELECTROPLATED COATINGS OF COPPER PLUS NICKEL PLUS CHROMIUM ON PLASTICS |
| ASTM D 444 : 1988 : R2008 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM A 309 : 2001 : R2007 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
| ASTM E 365 : 1999 | Standard Test Methods for the Determination of Vanadium in Ferrovanadium and Vanadium Alloying Additives (Withdrawn 2005) |
| ASTM E 2941 : 2014 : REDLINE | Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
| ASTM E 738 : 2011 : REDLINE | Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry |
| ASTM E 1335 : 2008 : R2017 | Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis |
| ASTM E 37 : 2005 : R2011 | Standard Test Methods for Chemical Analysis of Pig Lead (Withdrawn 2020) |
| ASTM E 156 : 1988 | Method for Determination of Phosphorus in High-Phosphorus Brazing Alloys (Photometric Method) (Withdrawn 1993) |
| ASTM E 416 : 1998 : R2004 | Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory (Withdrawn 2005) |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM E 382 : 2012 : REDLINE | Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets |
| ASTM E 1916 : 2011 : REDLINE | Standard Guide for Identification of Mixed Lots of Metals |
| ASTM E 1409 : 2013 : REDLINE | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM D 4042 : 1993 : R2009 | Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| ASTM C 760 : 1990 : R2015 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
| ASTM B 248M : 2017 : REDLINE | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
| ASTM A 922 : 2005 | Standard Specification for Silicon Metal |
| ASTM C 146 : 1994 : REV A : R2014 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM D 444 : 1988 : R2003 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM E 2626 : 2008 : EDT 1 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017) |
| ASTM C 146 : 1994 : REV A : R2009 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM E 483 : 1974 : R1983 | Method for Spectrographic Analysis of Nickel Alloys by the Silver Chloride-Lithium Fluoride Carrier Technique (Withdrawn 1989) |
| SAE ARP1313D | Determination of Trace Elements in High Temperature Alloys |
| ASTM C 1271:1999 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
| ASTM B 604 : 1991 : R2003 : EDT 1 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 115 : 2010 | Standard Specification for Electrolytic Copper Cathode |
| ASTM D 444 : 1988 : R1999 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM C 146 : 1994 : REV A : R2004 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM E 40 : 1988 | Standard Test Method for Chemical Analysis of Slab Zinc (Spelter) (Withdrawn 1993) |
| ASTM E 1812 : 1996 | Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment |
| ASTM D 444 : 1988 : R2014 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM A 309 : 2001 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
| ASTM E 75 : 1976 : R1996 | Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys |
| ASTM E 246 : 2010 : R2015 | Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
| ASTM E 1024 : 1997 : R2004 | Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004) |
| ASTM E 121 : 1983 : R1996 | Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys |
| ASTM E 47 : 1993 | Standard Test Methods for Chemical Analysis of Zinc Die-Casting Alloys (Withdrawn 1997) |
| ASTM C 760 : 1990 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
| ASTM C 760 : 1990 : R2007 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
| ASTM D 3610 : 2000 : R2010 | Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM D 2674 : 1972 : R2012 | Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
| ASTM B 368 : 2009 : R2014 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM E 1081 : 1995 : REV A | Standard Test Method for Determination of Total Iron in Iron Ores and Related Materials by Silver Reduction-Dichromate Titration (Withdrawn 2002) |
| ASTM E 39 : 1984 : R1990 : EDT 1 | Methods for Chemical Analysis of Nickel |
| ASTM E 247 : 2001 : R2010 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
| ASTM E 2823 : 2017 : REDLINE | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
| ASTM C 25 : 2017 : REDLINE | TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME |
| ASTM E 1812 : 1996 : R2004 : EDT 1 | Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment (Withdrawn 2004) |
| ASTM E 342 : 2011 : R2016 | Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry |
| ASTM F 1277 : 2002 : R2009 | Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique (Withdrawn 2018) |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 438 : 1992 | SPECIFICATION FOR GLASSES IN LABORATORY APPARATUS |
| ASTM E 100 : 2017 : REDLINE | SPECIFICATION FOR ASTM HYDROMETERS |
| ASTM E 1621 : 2013 : REDLINE | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.