ASTM E 721 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
Hardcopy , PDF
23-08-2022
English
26-12-2016
Committee |
E 10
|
DocumentType |
Guide
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers procedures for determining the energy-differential fluence spectra of neutrons used in radiation-hardness testing of electronic semiconductor devices. The types of neutron sources specifically covered by this guide are fission or degraded energy fission sources used in either a steady-state or pulse mode.
1.2This guide provides guidance and criteria that can be applied during the process of choosing the spectrum adjustment methodology that is best suited to the available data and relevant for the environment being investigated.
1.3This guide is to be used in conjunction with Guide E720 to characterize neutron spectra and is used in conjunction with Practice E722 to characterize damage-related parameters normally associated with radiation-hardness testing of electronic-semiconductor devices.
Note 1:Although Guide E720 only discusses activation foil sensors, any energy-dependent neutron-responding sensor for which a response function is known may be used (1).2
Note 2:For terminology used in this guide, see Terminology E170.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F 1190 : 2018 | Standard Guide for Neutron Irradiation of Unbiased Electronic Components |
ASTM E 722 : 2019 | Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics |
ASTM E 720 : 2016 | Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics |
ASTM E 265 : 2015 : R2020 | Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32 |
ASTM E 1854 : 2019 | Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts |
ASTM E 2450 : 2016 | Standard Practice for Application of CaF<inf>2</inf>(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments |
ASTM F 980 : 2016 | Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices |
ASTM E 1297 : 2008 : R2013 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 523 : 2001 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
ASTM E 1018 : 2020 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 1855 : 2005 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 1855 : 2004 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 1855 : 2004 : EDT 1 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 266 : 1992 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
ASTM E 1855 : 2005 : EDT 1 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 264 : 2019 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
ASTM E 1018 : 2009 : R2013 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 523 : 2016 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
ASTM E 1855 : 2015 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 526 : 1997 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium |
ASTM E 720 : 2002 | Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics |
ASTM E 944 : 1996 | Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, (IIA) |
ASTM E 393 : 1996 | Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters |
ASTM E 264 : 1992 : R1996 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
ASTM E 523 : 2021 : EDT 1 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
ASTM E 1297 : 1996 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 523 : 2021 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
ASTM E 1855 : 2020 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 261 : 2016 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
ASTM E 1018 : 2009 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
ASTM E 1855 : 2010 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 1297 : 2008 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 264 : 1992 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
ASTM E 1018 : 2009 : R2013 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E706 (IIB) |
ASTM E 1297 : 2018 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 1018 : 2001 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
ASTM E 1297 : 2002 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 1855 : 1996 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
ASTM E 704 : 1996 | Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238 |
ASTM E 1018 : 2020 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 720 : 1994 | Standard Guide for Selection and Use of Neutron-Activation Foils for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics |
ASTM E 705 : 1996 | Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237 |
ASTM E 261 : 2016 : R2021 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
ASTM E 1018 : 1995 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
ASTM E 266 : 1992 : R1996 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.