![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 90 : 2009 : R2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
Hardcopy , PDF
19-01-2024
English
19-01-2017
CONTAINED IN VOL. 04.06, 2017 Describes the laboratory measurement of airborne sound transmission loss of building partitions such as walls of all kinds, operable partitions, floor-ceiling assemblies, doors, windows, roofs, panels, and other space-dividing elements.
Committee |
E 33
|
DocumentType |
Test Method
|
Pages |
15
|
ProductNote |
Reconfirmed 2016
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the laboratory measurement of airborne sound transmission loss of building partitions such as walls of all kinds, operable partitions, floor-ceiling assemblies, doors, windows, roofs, panels, and other space-dividing elements.
1.2Laboratories are designed so the test specimen constitutes the primary sound transmission path between the two test rooms and so approximately diffuse sound fields exist in the rooms.
1.3Laboratory Accreditation—The requirements for accrediting a laboratory for performing this test method are given in Annex A4.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 2634 : 2018 : R2022 | Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems |
ASTM E 966 : 2018 : REV A | Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements |
ASTM E 2964 : 2021 | Standard Test Method for Measurement of the Normalized Insertion Loss of Doors |
ASTM E 1222 : 2022 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
ASTM E 2611 : 2019 | Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method |
ASTM C 844 : 2015 : R2021 | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
ASTM C 926 : 2023 : REV A | Standard Specification for Application of Portland Cement-Based Plaster |
ASTM C 919 : 2022 | Standard Practice for Use of Sealants in Acoustical Applications |
ASTM E 557 : 2012 : R2020 | Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions |
ASTM E 2963 : 2022 | Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments |
ASTM E 1123 : 1986 : R2023 | Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials |
ASTM C 1825 : 2019 | Standard Guide for Developing Specifications for Masonry Units |
ASTM E 1414/E1414M : 2021 : REV A | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
ASTM E 2813 : 2018 | Standard Practice for Building Enclosure Commissioning |
ASTM C 1063 : 2023 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
ASTM E 1374 : 2018 : EDT 1 | Standard Guide for Office Acoustics and Applicable ASTM Standards |
ASTM C 842 : 2005 : R2021 | Standard Specification for Application of Interior Gypsum Plaster |
ASTM E 2249 : 2019 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
ASTM E 2179 : 2021 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
ASTM E 3091 : 2017 | Standard Specification for Systems to Measure Sound Levels |
ASTM E 492 : 2022 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
ASTM C 423 : 2017 : REDLINE | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM E 2235 : 2003 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
ASTM E 413 : 2022 | Classification for Rating Sound Insulation |
ASTM E 1414 : 2000 : REV A | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
ASTM E 1332 : 2010 | Standard Classification for Determination of Outdoor-Indoor Transmission Class |
ASTM E 1332 : 2010 : REV A | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ISO/R 717:1968 | Withdrawal of ISO/R 717-1968 |
ASTM E 1289 : 2008 : R2022 | Standard Specification for Reference Specimen for Sound Transmission Loss |
ASTM C 634 : 2013 : EDT 1 | Standard Terminology Relating to Building and Environmental Acoustics |
ASTM E 2235 : 2004 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
ASTM E 2235 : 2004 : R2020 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
ASTM E 2235 : 2004 : R2012 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
ASTM E 1289 : 2008 | Standard Specification for Reference Specimen for Sound Transmission Loss |
ASTM C 634 : 2022 | Standard Terminology Relating to Building and Environmental Acoustics |
ANSI S1.11 : 2014 | SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS |
IEC 60942:2003 | Electroacoustics - Sound calibrators |
ASTM E 413 : 2016 | Classification for Rating Sound Insulation |
ASTM C 423 : 2017 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM E 1007 : 2019 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 336 : 2023 | Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings |
ASTM E 492 : 2009 : R2016 : EDT 1 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
ASTM E 1425 : 2014 | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
ASTM E 1111 : 2005 | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
ASTM C 634 : 2013 : R2021 | Standard Terminology Relating to Building and Environmental Acoustics |
ASTM C 423 : 2022 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM E 1289 : 2008 : R2016 | Standard Specification for Reference Specimen for Sound Transmission Loss |
ASTM E 1425 : 2007 | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
ASTM E 2235 : 2004 : EDT 1 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
ASTM E 1332 : 1990 : R1998 | Standard Classification for Determination of Outdoor-Indoor Transmission Class |
ASTM E 1111 : 2007 | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
ASTM E 1007 : 2011 : EDT 1 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1007 : 2013 : REV A | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1332 : 2016 | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ASTM E 1414 : 2006 | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
ASTM E 1332 : 2022 | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ANSI S1.10 : 66(R2001) | AMERICAN NATIONAL STANDARD METHOD FOR THE CALIBRATION OF MICROPHONES |
ASTM C 423 : 2023 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM E 1007 : 1997 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ANSI S1.43 : 1997 | SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS |
ASTM E 1425 : 2014 : REDLINE | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
ASTM E 413 : 2016 : REDLINE | Classification for Rating Sound Insulation |
ASTM E 1111 : 1992 : R1996 : EDT 1 | Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems |
ASTM E 1111 : 2002 | Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems |
ASTM E 1425 : 1991 : R1999 | Standard Practice for Determining the Acoustical Performance of Exterior Windows and Doors |
ASTM E 1425 : 2014 : R2023 | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
ASTM E 1007 : 2021 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1007 : 2013 : REV B | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1332 : 2016 : REDLINE | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
ASTM E 1007 : 2014 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1007 : 2004 : EDT 1 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1332 : 1990 : R2003 | Standard Classification for Determination of Outdoor-Indoor Transmission Class |
ASTM E 1007 : 2016 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
ASTM E 1289 : 1997 | Standard Specification for Reference Specimen for Sound Transmission Loss |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.