ASTM F 104 : 2011 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Classification System for Nonmetallic Gasket Materials
Available format(s)
PDF
Language(s)
English
Published date
01-04-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 09.02, 2015 Defines a means for specifying or describing pertinent properties of commercial nonmetallic gasket materials.
| Committee |
F 03
|
| DevelopmentNote |
Supersedes ASTM D 1170 (09/2001) Supersedes HH C 576 (04/2003) Supersedes HH P 96 & MIL G 12803 (07/2004) Supersedes A A 1188. (08/2004)
|
| DocumentType |
Redline
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1 This classification system provides a means for specifying or describing pertinent properties of commercial nonmetallic gasket materials. Materials composed of asbestos, cork, cellulose, and other organic or inorganic materials in combination with various binders or impregnants are included. Materials normally classified as rubber compounds are not included, since they are covered in Classification D2000. Gasket coatings are not covered, since details thereof are intended to be given on engineering drawings or in separate specifications. Facing materials for laminate composite gasket materials (LCGM) are included in Classification System F104. Assembled LCGMs are covered in Classification F868.
1.2 Since all of the properties that contribute to gasket performance are not included, use of the classification system as a basis for selecting materials is limited.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-PRF-32307 Revision A:2017 | VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
| MIL-DTL-24696 Revision C:2008 | GASKET, SHEET, NON-ASBESTOS |
| ASTM F 37 : 2006 : R2013 | Standard Test Methods for Sealability of Gasket Materials |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| ASTM F 1574 : 2003 : REV A : R2017 | Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures |
| CGSB 4.2-51.2 : M87(R1997) | TEXTILE TEST METHODS - RESISTANCE TO PILLING - RANDOM TUMBLE PILLING TESTER |
| FSA G 605 : 2011 | STANDARD TEST METHOD FOR DETERMINING (M) AND (Y) LOADING CONSTANTS APPLICABLE TO GASKET MATERIALS AND DESIGNS |
| ASTM F 433 : 2002 | Standard Practice for Evaluating Thermal Conductivity of Gasket Materials |
| ASTM F 1431 : 1992 : R1998 | Standard Specification for Water Trap for Diesel Exhaust |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1431 : 1992 : R2010 | Standard Specification for Water Trap for Diesel Exhaust |
| ASTM F 152 : 1995 : R2002 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 917 : 2014 : REDLINE | Standard Specification for Commercial Food Waste Disposers |
| ASTM F 152 : 1995 : R2009 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 607 : 2003 : R2014 | Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces |
| ASTM F 37 : 2006 | Standard Test Methods for Sealability of Gasket Materials |
| ASTM F 336 : 2002 : R2009 | Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service |
| ASTM F 1150 : 2016 : REDLINE | Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1315 : 2017 : REDLINE | Standard Test Method for Density of a Sheet Gasket Material |
| BS EN 14772:2005 | Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| MIL-DTL-20064 Revision F:2014 | Valve, Nonferrous, for Use with Halogenated Refrigerants |
| NASA SSTD 8070 0067 : 2004 | HIGH PRESSURE INDUSTRIAL WATER PIPING 'AG' |
| NASA SSTD 8070 0044 : 2012 | STANDARD FOR CARBON STEEL PIPING SYSTEMS |
| ASTM F 1276 : 1999 | Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials |
| ASTM F 147 : 1987 : R1997 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
| ASTM F 806 : 1999 : REV A : R2009 | Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| MIL-DTL-3976 Revision F:2013 | Lights, Marker, Clearance (Service and Blackout) General Specification for |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 868 : 2017 : REDLINE | Standard Classification for Laminated Composite Gasket Materials |
| ASTM F 336 : 2002 : R2016 | Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service |
| ASTM F 1431 : 1992 : R2016 | Standard Specification for Water Trap for Diesel Exhaust |
| ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM F 1276 : 1999 : R2003 | Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials |
| I.S. EN 14772:2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| EN 14772:2005 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| ASHRAE 26 : 2010 | MECHANICAL REFRIGERATION AND AIR-CONDITIONING INSTALLATIONS ABOARD SHIP |
| ASTM F 607 : 2003 : R2008 | Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces |
| ASTM F 1276 : 1999 : R2009 | Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials |
| ASTM F 147 : 1987 : R2003 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
| ASTM F 1276 : 1999 : R2016 | Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials |
| FSA NMG 204 : 2002 | STANDARD TEST METHOD FOR PERFORMANCE OF NON-METALLIC FLAT GASKETS IN HIGH PRESSURE, SATURATED STEAM |
| MIL-G-24717 Base Document:1989 | GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL G 24696 : B | GASKET, SHEET, NON-ASBESTOS |
| ASTM F 2378 : 2005 : R2016 | Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials |
| ASTM E 1530 : 2011 | Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
| HI 9.1 - 9.5 : 2015 | PUMPS - GENERAL GUIDELINES |
| ASTM F 806 : 1999 : REV A : R2003 : EDT 1 | Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| ASTM F 1574 : 2003 | Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures |
| ASTM F 1574 : 2003 : REV A : R2009 | Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures |
| ASTM F 146 : 2012 : REDLINE | TEST METHODS FOR FLUID RESISTANCE OF GASKET MATERIALS |
| ASTM F 152 : 1995 : R2017 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1574 : 2003 : REV A | Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures |
| ASTM F 806 : 1999 : REV A : R2003 | Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| CAN/CGSB 4.2 NO. 51.2-M:1987 | TEXTILE TEST METHODS - RESISTANCE TO PILLING - RANDOM TUMBLE PILLING TESTER |
| NASA SSTD 8070 0047 : 2016 | STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z |
| MIL-G-12803 Revision C:1989 | GASKET MATERIAL, NON-METALLIC |
| ASTM F 2378 : 2005 | Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials |
| ASTM F 1510 : 2007 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| SAE AMS3250K | SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, SOFT |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| SAE AMS3251J | SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, MEDIUM |
| ASTM F 38 : 2000 | Standard Test Methods for Creep Relaxation of a Gasket Material |
| MIL G 1149 : C | GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS |
| SAE AMS3843D | POLYTETRAFLUOROETHYLENE SHEET, ASBESTOS FIBER REINFORCED, HIGH COMPRESSIBILITY, LOW DENSITY |
| ASTM F 3270/F3270M : 2017 | Standard Practice for Compression versus Load Properties of Gasket Materials |
| ASTM F 36 : 2015 : REDLINE | Standard Test Method for Compressibility and Recovery of Gasket Materials |
| ASTM F 336 : 2002 | Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service |
| ASTM F 152 : 1995 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 1431 : 1992 : R2004 | Standard Specification for Water Trap for Diesel Exhaust |
| ASTM F 147 : 1987 : R2017 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
| ASTM F 806 : 1999 : REV A : R2017 | Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| ASTM F 806 : 1999 : REV A | Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| ASTM F 38 : 2000 : R2014 | Standard Test Methods for Creep Relaxation of a Gasket Material |
| 03/114555 DC : DRAFT SEP 2003 | EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| SAE AMSC6183B : 2013(S2019) | CORK AND RUBBER COMPOSITION SHEET; FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| ASTM F 3149 : 2015 | Standard Practice for Determining the Maintenance Factor (<emph type="bdit">m</emph >) and Yield Factor (<emph type="bdit">y</emph>) Loading Constants Applicable to Gasket Materials and Designs |
| MIL-PRF-1149 Revision D:1998 | GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS |
| ASTM F 147 : 1987 : R2009 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
| ASTM PS 56 : 1996 | Test Methods for Sealability of Gasket Materials (Withdrawn 1997) |
| ASTM F 38 : 2000 : R2006 | Standard Test Methods for Creep Relaxation of a Gasket Material |
| ASTM D 3512/D3512M : 2016 : REDLINE | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
| ASTM F 2716 : 2008 | Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam |
| ASTM F 2716 : 2008 : R2014 | Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam |
| ASTM F 2378 : 2005 : R2011 | Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials |
| ASTM F 607 : 2003 | Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces |
| ASTM E 1530 : 2011 : R2016 | Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
| ASTM F 433 : 2002 : R2014 : EDT 1 | Standard Practice for Evaluating Thermal Conductivity of Gasket Materials |
| ASTM F 433 : 2002 : R2009 | Standard Practice for Evaluating Thermal Conductivity of Gasket Materials |
| DIN EN 14772:2005-04 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| ASTM F 38 : 2000 | Standard Test Methods for Creep Relaxation of a Gasket Material |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM F 146 : 2012 : REDLINE | TEST METHODS FOR FLUID RESISTANCE OF GASKET MATERIALS |
| ASTM F 868 : 2017 : REDLINE | Standard Classification for Laminated Composite Gasket Materials |
| ASTM C 561 : 2016 : REDLINE | Standard Test Method for Ash in a Graphite Sample |
| ASTM F 1315 : 2017 : REDLINE | Standard Test Method for Density of a Sheet Gasket Material |
| ASTM F 36 : 2015 : REDLINE | Standard Test Method for Compressibility and Recovery of Gasket Materials |
| ASTM D 5964 : 2016 : REDLINE | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM F 152 : 1995 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.