ASTM F 1138 : 1998 : R2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Spray Shields for Mechanical Joints
Hardcopy , PDF
25-09-2021
English
25-02-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 01.07, 2018 Specifies the manufacturing requirements for spray shield stock and the fabrication and installation requirements for spray shields made from that stock.
| Committee |
F 25
|
| DocumentType |
Standard
|
| Pages |
7
|
| ProductNote |
Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification describes the manufacturing requirements for spray shield stock and the fabrication and installation requirements for spray shields made from that stock.
1.1.1Sections 2 – 14 address the manufacturing requirements for the spray shield stock. Annex A1 addresses the fabrication and installation requirements for the spray shields.
1.1.2Fig. 1 shows the typical construction of a spray shield. Figs. 2-6 show methods of installation of a spray shield on various mechanical joints.
1.2The shields are intended for use around mechanical joints (flanged, bolted unions, and so forth) in liquid piping systems to prevent the impingement of flammable liquid on hot surfaces or fluids onto electrical switchboards and components resulting from a leak in the mechanical joint.
1.3The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
| ASTM F 683 : 2014 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| ASTM D 3786 : 2001 | Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method |
| AATCC TM 35 : 2013 | WATER RESISTANCE: RAIN TEST |
| ASTM B 134/B134M : 2015 : REDLINE | Standard Specification for Brass Wire |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM D 1424 : 1996 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 1424 : 2009 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 3786 : 2008 : REV A | Standard Test Method for Bursting Strength of Textile Fabrics<span class='unicode'>—</span>Diaphragm Bursting Strength Tester Method |
| ASTM B 134/B134M : 2015 : R2021 | Standard Specification for Brass Wire |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM D 1308 : 2002 : R2013 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM D 3389 : 2016 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 1424 : 2009 : R2013 : EDT 1 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 3776 : 2007 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM B 134/B134M : 2015 | Standard Specification for Brass Wire |
| ASTM D 3389 : 2021 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 3389 : 2010 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 3776 : 1996 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 1777 : 1996 : R2011 : EDT 1 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 1424 : 2009 : R2013 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 3389 : 2005 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 1777 : 1996 : R2002 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM D 3786 : 2006 : EDT 1 | Standard Test Method for Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 3776 : 2009 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 1777 : 1996 : R2007 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 1424 : 2021 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| ASTM D 1308 : 2002 : EDT 1 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM D 3389 : 2015 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 3786 : 2006 | Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method |
| ASTM D 1682 : 1964 : R1975 : EDT 1 | Standard Methods of Test for Breaking Load and Elongation of Textile Fabrics (Withdrawn 1992) |
| ASTM D 3786 : 2008 | Standard Test Method for Bursting Strength of Textile Fabrics<span class='unicode'>—</span>Diaphragm Bursting Strength Tester Method |
| ASTM D 1308 : 1979 : R1981 : EDT 1 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM D 3389 : 2016 : REDLINE | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM F 501 : 1993 | Test Method for Aerospace Materials Response to Flame, with Vertical Test Specimen (For Aerospace Vehicles Standard Conditions) (Withdrawn 1998) |
| ASTM D 1308 : 1987 : R1998 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM D 3389 : 1994 : R1999 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
| ASTM D 1424 : 2007 : REV A | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
| ASTM A 580/A580M : 2018 | Standard Specification for Stainless Steel Wire |
| ASTM D 1682 : 1964 | TEST METHODS FOR BREAKING LOAD AND ELONGATION OF TEXTILE FABRICS |
| ASTM D 1424 : 2007 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus |
| ASTM D 1308 : 2002 : R2007 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
| ASTM D 1424 : 2009 : R2019 | Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus |
| MIL C 20696 : E | CLOTH, COATED, POLYESTER OR NYLON, WATERPROOF |
| ASTM D 1308 : 2002 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.