![header thumbnail](/images/publishers\astm_cover.gif)
ASTM F 1155 : 2010 : R2019
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Selection and Application of Piping System Materials
Hardcopy , PDF
English
01-01-2020
Committee |
F 25
|
DocumentType |
Standard Practice
|
Pages |
24
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice is intended as a guide to shipbuilders, shipowners, and design agents for use in the preparation of piping system material schedules for commercial ship design and construction.
1.2The materials and limitations listed in Tables 1-28 meet the minimum requirements of the U.S. Coast Guard and the American Bureau of Shipping and, except for titanium, should be considered to be the minimum acceptable materials in regard to material, design, and testing. This document is not intended to limit the selection of material strictly to those listed. Other equal or superior materials may be used provided that they are acceptable to the regulatory bodies and classification societies.
Note 1:Titanium has been added as its use in fresh and sea water systems is becoming more common.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 1273 : 1991 : R2013 | Standard Specification for Tank Vent Flame Arresters |
ASTM F 1311 : 1990 : R2018 | Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges |
ASTM F 1386 : 1992 : R2016 : EDT 1 | Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding |
ASTM F 1994 : 1999 : R2019 : EDT 1 | Standard Test Method for Shipboard Fixed Foam Firefighting Systems |
ASTM F 2363/F2363M : 2017 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
ASTM A 335/A335M : 2023 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 234/A234M : 2024 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM A 242/A242M : 2013 : R2018 | Standard Specification for High-Strength Low-Alloy Structural Steel |
ASTM F 683 : 2021 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ASTM A 249/A249M : 2010 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM A 351/A351M : 2024 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
ASTM A 234/A234M : 2010 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM A 53/A53M : 2020 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM A 105/A105M : 2024 | Standard Specification for Carbon Steel Forgings for Piping Applications |
ASTM A 139/A139M : 2016 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM A 182/A182M : 2021 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM B 381 : 2013 : R2019 | Standard Specification for Titanium and Titanium Alloy Forgings |
ASTM A 307 : 2014 : EDT 1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
ASTM B 863 : 2019 | Standard Specification for Titanium and Titanium Alloy Wire |
ASTM A 182/A182M : 2011 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM B 88 : 1983 : REV A | Standard Specification for Seamless Copper Water Tube |
ASTM A 53/A53M : 2024 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM A 216/A216M : 2021 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
ASTM A 234/A234M : 2019 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM A 194/A194M : 2020 : REV A | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
ASTM A 213/A213M : 2023 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 335/A335M : 2019 : REV A | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 320/A320M : 2022 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM A 234/A234M : 2022 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM B 348 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM B 862 : 2019 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
ASTM A 182/A182M : 2024 : REV A | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 193/A193M : 2022 : REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
ASTM B 61 : 1993 | Standard Specification for Steam or Valve Bronze Castings (Withdrawn 2002) |
ASTM F 1548 : 2001 : R2018 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
ASTM A 351/A351M : 2018 : EDT 1 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
ASTM B 363 : 2019 | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
ASTM D 4024 : 2015 | Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM A 213/A213M : 2022 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 515/A515M : 1992 : R1997 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM A 249/A249M : 2024 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM F 722 : 2018 | Standard Specification for Welded Joints for Shipboard Piping Systems |
ASTM A 105/A105M : 2023 | Standard Specification for Carbon Steel Forgings for Piping Applications |
ASTM F 704 : 1981 : R2022 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ASTM B 88 : 1966 : REV A | Standard Specification for Seamless Copper Water Tube |
ASTM A 194/A194M : 2024 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
ASTM A 179/A179M : 2024 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM B 363 : 2023 | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
ASTM B 367 : 2022 | Standard Specification for Titanium and Titanium Alloy Castings |
ASTM A 335/A335M : 2001 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 193/A193M : 2022 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
ASTM B 88 : 2022 | Standard Specification for Seamless Copper Water Tube |
ASTM A 320/A320M : 2022 : REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM F 1476 : 2007 : R2019 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
ASTM A 515/A515M : 2017 : R2022 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM A 181/A181M : 2023 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM A 234/A234M : 2023 : REV A | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM B 861 : 2024 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
ASTM A 193/A193M : 2004 : REV B | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
ASTM A 213/A213M : 2011 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM F 1548 : 2001 : R2023 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
ASTM A 194/A194M : 2023 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
ASTM A 320/A320M : 2024 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM B 88 : 2020 | Standard Specification for Seamless Copper Water Tube |
ASTM A 213/A213M : 1999 : EDT 1 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM B 467 : 2014 | Standard Specification for Welded Copper-Nickel Pipe |
ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
ASTM F 683 : 2023 : REV A | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ASTM A 134 : 1996 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
ASTM A 182/A182M : 2020 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 105/A105M : 1998 | Standard Specification for Carbon Steel Forgings for Piping Applications |
ASTM F 722 : 2018 : R2022 | Standard Specification for Welded Joints for Shipboard Piping Systems |
ASTM A 335/A335M : 2024 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 106/A106M : 2019 : REV A | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
ASTM B 338 : 2017 : R2021 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
ASTM B 338 : 2017 : EDT 1 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
ASTM F 468 : 2023 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
ASTM A 213/A213M : 2021 : REV B | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 216/A216M : 2018 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
ASTM A 320/A320M : 2018 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM F 682 : 1982 : REV A : R2018 | Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM A 179/A179M : 2019 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 283/A283M : 2018 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
ASTM D 4024 : 2022 | Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM A 214/A214M : 1996 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM B 62 : 1993 | Standard Specification for Composition Bronze or Ounce Metal Castings (Withdrawn 2002) |
ASTM A 105/A105M : 2021 | Standard Specification for Carbon Steel Forgings for Piping Applications |
ASTM A 249/A249M : 2018 : REV A | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM A 213/A213M : 2022 : REV A | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 335/A335M : 2022 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 192/A192M : 2017 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
ASTM F 683 : 2014 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ASTM D 2996 : 2017 | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM A 193/A193M : 2023 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
ASTM A 192/A192M : 2024 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
ASTM A 335/A335M : 2021 : REV A | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 182/A182M : 2023 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 242/A242M : 2024 | Standard Specification for High-Strength Low-Alloy Structural Steel |
ASTM A 182/A182M : 2022 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 283/A283M : 2024 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
ASTM A 139/A139M : 2022 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM A 164 : 1955 | Specification for Electrodeposited Coatings of Zinc on Steel |
ASTM A 213/A213M : 2021 : REV A | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 387/A387M : 2017 : REV A | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
ASTM A 192/A192M : 1991 : R1996 : EDT 1 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
ASTM A 249/A249M : 2024 : REV A | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM A 335/A335M : 2021 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 234/A234M : 2001 : REV A | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM B 265 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM B 467 : 2014 : R2022 | Standard Specification for Welded Copper-Nickel Pipe |
ASTM A 181/A181M : 2014 : R2020 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM A 213/A213M : 2010 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM B 861 : 2019 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
ASTM A 194/A194M : 2022 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
ASTM A 179/A179M : 1990 : REV A : R1996 : EDT 1 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
ASTM A 320/A320M : 2021 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM A 194/A194M : 2022 : REV A | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
ASTM A 234/A234M : 2023 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
ASTM B 381 : 2021 | Standard Specification for Titanium and Titanium Alloy Forgings |
ASTM F 682 : 1982 : REV A : R1998 | Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM A 182/A182M : 2022 : REV A | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM F 683 : 2023 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ASTM A 182/A182M : 2001 : REV A | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM B 381 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Forgings |
ASTM B 863 : 2023 | Standard Specification for Titanium and Titanium Alloy Wire |
ASTM D 2996 : 1995 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM F 682 : 1982 : REV A : R2023 | Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM A 387/A387M : 2017 : REV A : R2023 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
ASTM D 2997 : 2021 | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM A 249/A249M : 2018 : REV A : R2023 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
ASTM A 193/A193M : 2024 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
ASTM A 515/A515M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM B 61 : 2015 : R2021 | Standard Specification for Steam or Valve Bronze Castings |
ASTM A 213/A213M : 2019 : REV A | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
ASTM B 61 : 2015 | Standard Specification for Steam or Valve Bronze Castings |
ASTM A 53/A53M : 2022 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM B 862 : 2023 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
ASTM A 193/A193M : 2020 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
ASTM A 182/A182M : 2024 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM D 2996 : 2023 | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM F 468 : 2022 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
ASTM A 307 : 2021 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
ASTM A 320/A320M : 2021 : REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
ASTM A 53/A53M : 2018 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM A 213/A213M : 2024 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 395/A395M : 1999 : R2022 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ASTM A 213/A213M : 2021 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
ASTM A 181/A181M : 2022 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM F 704 : 1981 : R2018 : EDT 1 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ASTM D 2997 : 2015 | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.