Skip to content
Please enter a keyword to search

  • ASTM D 2996 : 2017

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    Available format(s):  Hardcopy, PDF

    Superseded date:  19-10-2023

    Language(s):  English

    Published date:  17-08-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 60 in.

    Scope - (Show below) - (Hide below)

    1.1This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 60 in. nominal size. Included are a classification system and requirements for materials, mechanical properties, dimensions, performance, methods of test, and marking.

    1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are provided for information purposes only.

    1.3The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    Note 1:The term “fiberglass pipe” as described in Section 3 of this specification applies to both reinforced thermosetting resin pipe (RTRP) and reinforced polymer mortar pipe (RPMP). This specification covers only reinforced thermosetting resin pipe (RTRP).

    Note 2:This specification is applicable to RTRP where the ratio of outside diameter to wall thickness is 10:1 or more.

    Note 3:There is no known ISO equivalent to this standard.

    Note 4:For the purposes of this standard, polymer does not include natural polymers.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 20
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 5421 : 2023 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
    ASTM C 1847 : 2021 Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
    ASTM F 1155 : 2010 : R2019 Standard Practice for Selection and Application of Piping System Materials
    ASTM D 4097 : 2019 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    ASTM D 3299 : 2018 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    ASTM D 5421 : 2015 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
    ASTM D 4097 : 2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    ASTM F 1155 : 2010 : R2015 Standard Practice for Selection and Application of Piping System Materials
    ASTM D 5685 : 2019 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
    ASTM D 2517 : 2018 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1600 : 1999 Standard Terminology for Abbreviated Terms Relating to Plastics
    ASTM D 2105 : 1997 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    ASTM D 2310 : 2001 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    ASTM D 1598 : 2002 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 1598 : 2015 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM F 412 : 2020 : REV A Standard Terminology Relating to Plastic Piping Systems
    ASTM D 1598 : 2015 : REV A Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM F 412 : 2021 Standard Terminology Relating to Plastic Piping Systems
    ASTM D 2992 : 2022 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 2143 : 1994 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 2310 : 2006 : R2012 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2017)
    ASTM D 2412 : 2011 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 2412 : 2002 : R2008 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 2992 : 2001 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 2310 : 2006 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    ASTM D 1598 : 2023 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 883 : 2022 Standard Terminology Relating to Plastics
    ASTM D 3567 : 1997 : R2006 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
    ASTM D 2412 : 2010 : REV A Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 1600 : 2007 Standard Terminology for Abbreviated Terms Relating to Plastics
    ASTM D 1600 : 2013 Standard Terminology for Abbreviated Terms Relating to Plastics
    ASTM D 1600 : 2014 Standard Terminology for Abbreviated Terms Relating to Plastics
    ASTM D 3567 : 2017 : R2022 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 1600 : 2008 Standard Terminology for Abbreviated Terms Relating to Plastics
    ASTM D 1598 : 1997 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 2412 : 1996 : REV A Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 2105 : 2001 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    ASTM D 1599 : 2014 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 1599 : 2014 : EDT 1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 2412 : 2002 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 3567 : 1997 : R2002 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 2143 : 2021 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 1599 : 2018 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 2105 : 2001 : R2014 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    ASTM D 1599 : 1999 : R2011 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
    ASTM D 1599 : 1999 : EDT 1 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 2143 : 2000 : R2010 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 2412 : 2021 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 1600 : 2018 Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
    ASTM D 2992 : 2006 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
    ASTM F 412 : 2023 Standard Terminology Relating to Plastic Piping Systems
    ASTM D 1598 : 2021 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 1598 : 2002 : R2008 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 3567 : 1997 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 2143 : 2000 : R2005 : EDT 1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 2992 : 1996 : EDT 1 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 2105 : 2001 : R2019 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    ASTM D 2143 : 2015 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 1599 : 1999 : R2005 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 1598 : 2002 : R2009 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    ASTM D 3567 : 2017 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 2143 : 2000 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    ASTM D 2992 : 2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 2412 : 2011 : R2018 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 2310 : 1997 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    ASTM D 2992 : 2018 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    ASTM D 1599 : 1999 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
    ASTM D 3567 : 1997 : R2011 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing
    ASTM D 2412 : 2010 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    ASTM D 2105 : 2001 : R2007 : EDT 1 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective