![header thumbnail](/images/publishers\astm_cover.gif)
ASTM F 3510 : 2021
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products
Hardcopy , PDF
English
13-04-2021
Committee |
F 04
|
DocumentType |
Guide
|
Pages |
23
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1This guide is a resource for the characterization of fiber-based constructs intended for use in a tissue-engineered medical product (TEMP). There are existing standards that broadly cover scaffolds in a more generalized fashion (Guides F2150, F2450, F2900, F2902, ISO 21560). This guide focuses specifically on fiber-based constructs.
1.2Fiber-based constructs may be fabricated by many different methods including, but not limited to the following: electrospinning, forcespinning, meltspinning, pneumatospinning, blowspinning, melt-electrowriting, melt extrusion, wet extrusion, fused deposition, liquid crystal deposition, electrochemical alignment, drawing, spinning, knitting, weaving, braiding, powder bed fusion (laser sintering), vat photopolymerization (stereolithography), binder jetting, directed energy deposition, self-assembly (for example, fibrillogenesis), and hybrid approaches. This document is intended to address fibers made by any of these methods, although electrospun fibers are addressed in greater detail in some sections.
1.3This guide will focus on constructs made of fibers wherein the average fiber diameter is within the range of approximately 100 nm to 100 µm.
1.4For the purposes of this standard, a “fiber-based construct” is defined as a construct composed of slender, elongated filaments.
1.5Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 4496 : 2021 : EDT 1 | Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials |
ASTM C 1559 : 2015 : R2021 | Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM F 2477 : 2019 | Standard Test Methods for <emph type="bdit">in vitro</emph> Pulsatile Durability Testing of Vascular Stents |
ASTM F 3036 : 2021 | Standard Guide for Testing Absorbable Stents |
ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 1876 : 2008 : R2023 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
ASTM F 2952 : 2022 | Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold |
ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM F 1983 : 2023 | Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
ASTM F 2477 : 2024 | Standard Test Methods for <emph type="ital"> in vitro</emph> Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses |
ASTM D 3418 : 2021 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM C 1559 : 2015 | Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM D 854 : 2014 | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
ASTM D 1621 : 2016 : R2023 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM D 257 : 2014 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM F 3089 : 2014 | Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions |
ASTM F 2606 : 2008 : R2021 | Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems |
ASTM F 2529 : 2013 : R2021 | Standard Guide for <emph type="ital"> in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 1621 : 2016 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 1876 : 2008 : R2015 : EDT 1 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM F 2791 : 2015 | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
ASTM D 6701 : 2024 | Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers |
ASTM D 3418 : 2015 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 6797 : 2015 | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
ASTM D 1894 : 2014 | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023) |
ASTM D 6797 : 2024 | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test |
ASTM D 3786/D3786M : 2018 : R2023 | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
ASTM F 2952 : 2014 | Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold |
ASTM D 3786/D3786M : 2018 | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
ASTM D 6701 : 2021 | Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers |
ASTM F 2664 : 2019 : EDT 1 | Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods |
ASTM D 2256/D2256M : 2021 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
ASTM F 2477 : 2023 | Standard Test Methods for <emph type="ital"> in vitro</emph> Pulsatile Durability Testing of Vascular Stents and Endovascular Prostheses |
ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
ASTM F 2791 : 2024 | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
ASTM F 3369 : 2019 : EDT 1 | Standard Guide for Assessing the Skeletal Myoblast Phenotype |
ASTM F 2606 : 2008 : R2014 | Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems |
ASTM D 1388 : 2018 | Standard Test Method for Stiffness of Fabrics |
ASTM F 3106 : 2022 | Standard Guide for <emph type="bdit"> in vitro</emph> Osteoblast Differentiation Assays |
ASTM F 2256 : 2005 : R2015 | Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
ASTM F 2529 : 2013 | Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
ASTM F 3036 : 2013 | Standard Guide for Testing Absorbable Stents |
ASTM D 695 : 2015 | Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM D 4496 : 2021 | Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials |
ASTM F 1983 : 2014 | Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
ASTM D 1623 : 2017 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM F 3106 : 2014 | Standard Guide for <emph type="bdit">in vitro</emph> Osteoblast Differentiation Assays |
ASTM D 1623 : 2017 : R2023 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM F 2997 : 2021 | Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis |
ASTM D 854 : 2023 | Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method |
ASTM D 695 : 2023 | Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM F 2997 : 2013 | Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis |
ASTM D 257 : 2014 : R2021 : EDT 1 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
ASTM D 6539 : 2013 | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022) |
ASTM F 3089 : 2023 | Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions |
ASTM D 1388 : 2023 | Standard Test Method for Stiffness of Fabrics |
ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.