ASTM F 2437/F2437M : 2017
|
Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
|
ASTM F 2882/F2882M : 2017
|
Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
|
ASTM F 468M : 2006 : R2018
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
|
ASTM F 2281 : 2004 : R2017
|
Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
|
ASTM F 835 : 2020
|
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
|
ASTM F 3125/F3125M : 2019 : EDT 2
|
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
|
ASTM F 3043 : 2015
|
Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
|
ASTM A 502 : 2003 : R2015
|
Standard Specification for Rivets, Steel, Structural
|
ASTM F 593 : 2017
|
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
|
ASTM A 574 : 2017
|
Standard Specification for Alloy Steel Socket-Head Cap Screws
|
ASTM F 3148 : 2017 : REV A
|
Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
|
ASTM F 1941/F1941M : 2016
|
Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
|
ASTM F 3111 : 2016
|
Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
|
ASTM F 912 : 2011 : R2017
|
Standard Specification for Alloy Steel Socket Set Screws
|
ASTM F 901 : 2020
|
Standard Specification for Aluminum Transmission Tower Bolts and Nuts
|
ASTM F 1136/F1136M : 2011 : R2019
|
Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
|
ASTM F 3393 : 2020 : EDT 1
|
Zinc-Flake Coating Systems for Fasteners
|
ASTM C 806 : 2018
|
Standard Test Method for Restrained Expansion of Expansive Cement Mortar
|
ASTM F 3329 : 2018
|
Standard Specification for Carbon and Alloy Steel Metric Rivets
|
ASTM F 812 : 2012 : R2017
|
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
|
ASTM D 5652 : 2021
|
Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
|
ASTM F 2833 : 2011 : R2017
|
Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
|
ASTM F 432 : 2019
|
Standard Specification for Roof and Rock Bolts and Accessories
|
ASTM E 488/E488M : 2018
|
Standard Test Methods for Strength of Anchors in Concrete Elements
|
ASTM F 436/F436M : 2019
|
Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
|
ASTM A 449 : 2014 : R2020
|
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
|
ASTM A 194/A194M : 2020 : REV A
|
Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
|
ASTM D 7147 : 2011 : R2018
|
Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
|
ASTM F 2660 : 2020
|
Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
|
ASTM F 844 : 2019
|
Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
|
ASTM A 307 : 2021
|
Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
|
ASTM F 468 : 2016
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
|
ASTM A 962/A962M : 2019
|
Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
|
ASTM F 2329/F2329M : 2015
|
Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
|
ASTM F 1554 : 2020
|
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
|
ASTM A 354 : 2017 : EDT 2
|
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
|
ASTM A 320/A320M : 2021 : REV A
|
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
|
ASTM F 467 : 2013 : R2018
|
Standard Specification for Nonferrous Nuts for General Use
|
ASTM F 541 : 2012 : R2020
|
Standard Specification for Alloy Steel Eyebolts
|
ASTM A 193/A193M : 2020
|
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
|
ASTM A 183 : 2014 : R2020
|
Standard Specification for Carbon Steel Track Bolts and Nuts
|
ASTM F 879 : 2015 : R2020
|
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
|
ASTM F 959/F959M : 2017 : REV A
|
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
|
ASTM A 394 : 2008 : R2015
|
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
|
ASTM F 467M : 2006 : REV A : R2018
|
Standard Specification for Nonferrous Nuts for General Use (Metric)
|
ASTM A 489 : 2018 : EDT 1
|
Standard Specification for Carbon Steel Eyebolts
|