ASTM G 5 : 2014 : R2021
Current
The latest, up-to-date edition.
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
Hardcopy , PDF
English
26-08-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
G 01
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This reference test method covers an experimental procedure for checking experimental technique and instrumentation. If followed, this reference test method will provide repeatable potentiodynamic anodic polarization measurements that will reproduce data determined by others at other times and in other laboratories provided all laboratories are testing reference samples from the same lot of Type 430 stainless steel.
1.2Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 733 : 2021 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM G 100 : 1989 : R2021 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
| ASTM G 111 : 2021 : REV A | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM F 519 : 2018 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
| ASTM G 208 : 2012 : R2020 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM E 488/E488M : 2018 | Standard Test Methods for Strength of Anchors in Concrete Elements |
| ASTM G 189 : 2007 : R2021 : EDT 1 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 127 : 2015 | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ASTM G 102 : 1989 : R2015 : EDT 1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM E 1681 : 2003 : R2020 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ASTM F 3044 : 2020 | Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM G 59 : 1997 : R2020 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM G 106 : 1989 : R2015 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 192 : 2008 : R2020 : EDT 1 | Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
| ASTM F 1624 : 2012 : R2018 | Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique |
| ASTM G 199 : 2009 : R2020 : EDT 1 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 119 : 2009 : R2021 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM F 746 : 2004 : R2021 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ASTM G 185 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 215 : 2017 | Standard Guide for Electrode Potential Measurement |
| ASTM G 108 : 1994 : R2015 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ASTM G 170 : 2006 : R2020 : EDT 1 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM F 1940 : 2007 : REV A : R2019 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 2129 : 2019 : REV A | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 61 : 1986 : R2018 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM G 180 : 2021 | Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries |
| ASTM F 1875 : 1998 : R2014 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface |
| ASTM G 3 : 2014 : R2024 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM E 1338 : 2009 : R2021 : EDT 1 | Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM E 1338 : 2009 : R2021 | Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM G 3 : 2014 : R2019 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.