• Shopping Cart
    There are no items in your cart

ATS 5200.055-2008

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

21-07-2021

Language(s)

English

Published date

21-10-2008

€36.63
Excluding VAT

1 - ATS 5200.055-2008 TECHNICAL SPECIFICATIONS FOR PLUMBING AND DRAINAGE PRODUCTS - PLASTICS FITTINGS-CONNECTORS WITH...
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 APPLICATION
6 - 3 REFERENCED DOCUMENTS
7 - 4 DEFINITIONS
7 - 4.1 Expander joint
7 - 4.2 Swivel joint
7 - 5 MATERIALS
7 - 5.1 Plastics materials
7 - 5.1.1 General
7 - 5.1.2 Unplasticized polyvinyl chloride (PVC-U)
7 - 5.1.3 Acrylonitrile butadiene styrene (ABS)
7 - 5.1.4 Acrylonitrile styrene acrylate (ASA)
8 - 5.1.5 Polypropylene (PP)
8 - 5.1.6 Polyethylene (PE)
8 - 5.2 Elastomeric jointing seals
8 - 5.3 Solvent cement
8 - 6 MARKING
8 - 7 PACKAGING
8 - 8 DESIGN
8 - 8.1 End connectors
8 - 8.1.1 Solvent-welded joints
9 - 8.1.2 Elastomeric seal (rubber ring) joints
9 - 8.2 Dimensions
9 - 8.2.1 General
9 - 8.2.2 Waterway/Clear bore
9 - 8.3 Freedom from defects
9 - 8.4 Expander and swivel joints
9 - 8.4.1 Protection barrier
9 - 8.4.2 End stop
10 - 9 PERFORMANCE REQUIREMENTS AND TEST METHODS
10 - 9.1 Solvent-welded joints (ABS/PVC or ASA/PVC)
10 - 9.1.1 Joint strength
10 - 9.1.2 Shear strength
10 - 9.2 Elastomeric joints-Contact width and pressure
10 - 9.3 Fitting-Hydrostatic pressure test
10 - 9.4 Fitting-Liquid infiltration test
10 - 9.5 Fitting-High temperature stress-relief test (Injection-moulded fittings-PVC/ABS/ASA)
10 - 10 ‘VOID’
10 - 11 PRODUCT DOCUMENTATION
10 - 11.1 Product data
10 - 11.2 Installation instructions
12 - APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS AUSTRALIAN TECHNICAL SPECIFICATION
12 - A1 SCOPE
12 - A2 RELEVANCE
12 - A3 PRODUCT CERTIFICATION
12 - A4 DEFINITIONS
12 - A4.1 Sample
12 - A4.2 Sampling plan
12 - A4.3 Type test batch
12 - A4.4 Type testing
12 - A5 TESTING
12 - A5.1 Type testing
13 - A5.2 Batch release testing
13 - A5.3 Retesting
15 - APPENDIX B - JOINT SHEAR STRENGTH TEST
15 - B1 SCOPE
15 - B2 PRINCIPLE
15 - B3 APPARATUS
15 - B4 TEST SPECIMEN PREPARATION
15 - B5 PREPARATION OF TEST ASSEMBLIES
17 - B6 PROCEDURE
17 - B7 CALCULATIONS
17 - B8 TEST REPORT

This Australian Technical Specification sets out requirements for plastics bodied fittings of nominal sizes up to DN 225 with intermediate flexible joints for sewer or drain applications. These fittings are for use above ground or below ground and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The design of the fitting is such that it compensates for misalignment or movement that may be encountered in pipeline installations.

Committee
WS-031
DocumentType
Technical Specification
ISBN
0 7337 8928 5
Pages
12
PublisherName
Standards Australia
Status
Withdrawn

This Australian Technical Specification sets out requirements for plastics bodied fittings of nominal sizes up to DN 225 with intermediate flexible joints for sewer or drain applications. These fittings are for use above ground or below ground and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The design of the fitting is such that it compensates for misalignment or movement that may be encountered in pipeline installations.

First published as ATS 5200.055-2008.

AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) (Reconfirmed 2017)
AS/NZS 1462.8:2008 Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017)
AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS/NZS 1462.13:2006 Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure (Reconfirmed 2017)
AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017)
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 3500.5:2000 Plumbing and Drainage Domestic installations
AS/NZS 2032:2006 Installation of PVC pipe systems (Reconfirmed 2024)
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 1462.19:2006 Methods of test for plastics pipes and fittings C-ring test for fracture toughness of PVC pipes (Reconfirmed 2017)
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017)
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings (Reconfirmed 2024)
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017)
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS/NZS 1462.14:1996 Methods of test for PVC pipes and fittings Method for determination of the light transmission of pipe (Reconfirmed 2017)
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications (Reconfirmed 2017)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.