• There are no items in your cart

ATS 5200.499-2008

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

21-07-2021

Language(s)

English

Published date

21-10-2008

€45.92
Excluding VAT

1 - ATS 5200.499-2008 TECHNICAL SPECIFICATION FOR PLUMBING AND DRAINAGE PRODUCTS - INLINE SEWER DOSING UNIT (SDU)
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 APPLICATION
6 - 3 REFERENCED DOCUMENTS
7 - 4 DEFINITIONS
7 - 4.1 Nominal storage capacity
7 - 5 MATERIALS
7 - 5.1 General
7 - 5.2 UV resistance
7 - 6 MARKING
8 - 7 PACKAGING
8 - 8 DESIGN
8 - 8.1 Integral plumbing components, accessories or fittings
8 - 8.2 End connectors
8 - 8.3 Inspection opening
8 - 8.4 General design
9 - 9 PERFORMANCE REQUIREMENTS AND TEST METHODS
9 - 9.1 Paper and solids discharge test
9 - 9.2 Hydrostatic pressure test
9 - 9.3 Endurance test
9 - 9.4 Inspection opening and access cover-Load testing
9 - 10 VOID
9 - 11 PRODUCT DOCUMENTATION
9 - 11.1 General
9 - 11.2 Product data
10 - 11.3 Installation instructions
10 - 11.4 Operating instructions
10 - 11.5 Maintenance instructions
12 - APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS AUSTRALIAN TECHNICAL SPECIFICATION
12 - A1 SCOPE
12 - A2 RELEVANCE
12 - A3 PRODUCT CERTIFICATION
12 - A4 DEFINITIONS
12 - A4.1 Sample
12 - A4.2 Sampling plan
12 - A4.3 Type test batch
12 - A4.4 Type testing
12 - A5 TESTING
12 - A5.1 Type testing
13 - A5.2 Batch release testing
13 - A5.3 Retesting
15 - APPENDIX B - PAPER AND SOLIDS DISCHARGE TEST
15 - B1 SCOPE
15 - B2 PRINCIPLE
15 - B3 APPARATUS
15 - B4 TEST PIECES
16 - B5 PROCEDURE
16 - B6 TEST REPORT
20 - APPENDIX C - ENDURANCE TEST
20 - C1 SCOPE
20 - C2 PRINCIPLE
20 - C3 APPARATUS
21 - C4 PROCEDURE
21 - C5 TEST REPORT

This Australian Technical Specification sets out requirements and a design methodology for inline sewer dosing units (SDUs) and the minimum requirements for the connection within the sewer line. These products are intended to temporarily store and batch wise deliver measured volumes of waste water to the sewer line.

Committee
WS-031
DocumentType
Technical Specification
ISBN
0 7337 8929 3
Pages
16
PublisherName
Standards Australia
Status
Withdrawn

This Australian Technical Specification sets out requirements and a design methodology for inline sewer dosing units (SDUs) and the minimum requirements for the connection within the sewer line. These products are intended to temporarily store and batch wise deliver measured volumes of waste water to the sewer line.The basis for both the use of the unit and the design methodology is to supplement reduced water closet (WC) water usage with water from other plumbing fixtures to provide volumes that are similar to the historical design volumes for WCs.The SDU allows reduced water usage throughout the dwelling while at the same time maintaining sufficient transport volume as to match the original design intent of the sewer line system.An SDU is used to allow for the delivery of a minimum dosage of waste from the water closet and wastewater carrying medium from throughout the dwelling.The minimum dosage allows for the application of all water saving devices throughout the dwelling while at the same time ensuring that wastes from the water closet have sufficient carry medium.The application of an SDU ensures that the sewer line does not receive less than a minimum measured dose. This has positive implications to the design charts and minimum grades as noted in AS/NZS 3500.2 and AS/NZS 3500.5.The SDU also has applications as - - a greywater and blackwater mixing device prior to the transport stage through the sewer line to the sewer main; and- a greywater dosing system for re-use systems to ensure volumetric carry distance and dosage volume consistency.

First published as ATS 5200.499-2008.

AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS 1172.1-2005 Water closets (WC) Pans
AS/NZS 3500.5:2000 Plumbing and Drainage Domestic installations
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 2200-2006 Design charts for water supply and sewerage (Reconfirmed 2017)
AS 3996-2006 Access covers and grates
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications (Reconfirmed 2017)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.