AWS C2.23M/C2.23 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
28-04-2023
01-01-2003
1. Introduction
2. Definitions
3. Summary of Practice
4. TSC Feedstock Requirements
5. Surface Preparation Requirements
6. Thermal Spray Equipment Setup
7. Job Reference Standard (JRS)
8. TSC Application Procedure
9. Inspection of Applied TSC
10. Application of Optional Sealers and Topic
11. Records
12. Debris Containment and Control
13. Work Procedures and Safety
14. Application Procedure
References
Bibliography
Appendix A - Example Images of Electrochemical Sensors
(Nonmandatory)
Appendix B - Example of Reporting Information (Nonmandatory)
Appendix C - Commentary (Nonmandatory)
Appendix D - Example of Reporting Information (Nonmandatory)
Defines requirements for surface preparation, coating application, repair of coating defects, measurement of coating thickness, adhesion testing of the applied coating, and application of sealers and topcoats over the thermally sprayed metal coating.
| Committee |
C2
|
| DevelopmentNote |
Jointly published by NACE, AWS and SSPC. Also numbered as SSPC-CS 23.00 & NACE 12. (09/2016)
|
| DocumentType |
Standard
|
| PublisherName |
American Welding Society
|
| Status |
Superseded
|
| SupersededBy |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| ASTM A 1055 : 2008 | Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars |
| ASTM A 1055/A1055M : 2016 : REDLINE | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| NACE 30105 : 0 | ELECTRICAL ISOLATION/CONTINUITY AND COATING ISSUES FOR OFFSHORE PIPELINE CATHODIC PROTECTION SYSTEMS |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| NACE WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
| ASTM B 833 : 2013 : REDLINE | Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NACE SP 01 78 : 2007 | DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE |
| NACE WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4417 : 2014 : REDLINE | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| SSPC-SP WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| SSPC-SP WJ 2 : 2012 | WATERJET CLEANING OF METALS - VERY THOROUGH CLEANING |
| NACE WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| AWS C2.14 : 1974 | CORROSION TESTS OF FLAME SPRAYED COATED STEEL, 19-YEAR REPORT, |
| SSPC-SP WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| SSPC-SP WJ 3 : 2012 | WATERJET CLEANING OF METALS - THOROUGH CLEANING |
| SSPC-GUIDE 15 : 2013 | FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
| SSPC-PA 17 : 2012 | PROCEDURE FOR DETERMINING CONFORMANCE TO STEEL PROFILE/SURFACE ROUGHNESS/PEAK COUNT REQUIREMENTS |
| SSPC-AB 1 : 2015 | MINERAL AND SLAG ABRASIVES |
| AWS C2.25/C2.25M : 2012 | SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK - WIRE AND RODS |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| NACE WJ 4 : 2012 | WATERJET CLEANING OF METALS - LIGHT CLEANING |
| SSPC-AB 2 : 2015 | CLEANLINESS OF RECYCLED FERROUS METALLIC ABRASIVES |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| SSPC-SP 5 : 2015 | WHITE METAL BLAST CLEANING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.