BIS IS 694 : 2010(R2015)
Current
The latest, up-to-date edition.
POLYVINYL CHLORIDE INSULATED UNSHEATHED AND SHEATHED CABLES/CORDS WITH RIGID AND FLEXIBLE CONDUCTOR FOR RATED VOLTAGES UP TO AND INCLUDING 1100 V
12-01-2013
FOREWORD
1 GENERAL
2 REFERENCES
3 TERMINOLOGY
SECTION 1 - GENERAL REQUIREMENTS
4 CONDUCTOR
5 INSULATION
6 FILLER
7 BINDER TAPE
8 SHEATH
9 OVERALL DIMENSIONS
10 TESTS
11 IDENTIFICATION
12 CORE IDENTIFICATION
13 CABLE CODE
14 SAMPLING OF CABLES
15 PACKING AND MARKING
SECTION 2 - NON-SHEATHED SINGLE CORE
CABLES/CORDS FOR FIXED
AND FLEXIBLE WIRING
16 SINGLE CORE NON-SHEATHED CABLES WITH
RIGID CONDUCTOR (CLASS 1 OR CLASS 2) FOR
GENERAL PURPOSE (70 DEGREES C) OR HEAT
RESISTANT (85 DEGREES C)
17 SINGLE CORE NON-SHEATHED CABLES WITH
FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE
(70 DEGREES C) OR HEAT RESISTANT
(85 DEGREES C)
SECTION 3 - SHEATHED SINGLE AND MULTICORE
CABLES/CORDS FOR FIXED AND FLEXIBLE
WIRING
18 SINGLE AND MULTICORE CIRCULAR PVC INSULATED
AND SHEATHED CABLES WITH RIGID CONDUCTOR
(CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE
(70 DEGREES C) OR HEAT RESISTANT (85 DEGREES C)
19 SINGLE AND MULTICORE CIRCULAR PVC INSULATED
AND SHEATHED CABLES/CORDS WITH FLEXIBLE
CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE
(70 DEGREES C) OR HEAT RESISTANT (85 DEGREES C)
20 MULTICORE CIRCULAR PVC INSULATED AND SHEATHED
CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR
GENERAL PURPOSE (70 DEGREES C) OR HEAT
RESISTANT (85 DEGREES C)
21 PARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC
INSULATED NON-SHEATHED CORDS WITH FLEXIBLE
CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE
(70 DEGREES C) OR HEAT RESISTANT (85 DEGREES C)
22 TWO AND THREE CORE FLAT CABLES WITH PVC
INSULATION AND SHEATH HAVING STRANDED OR
FLEXIBLE CONDUCTOR (CLASS 2 OR CLASS 5) FOR
GENERAL PURPOSE (70 DEGREES C) OR HEAT
RESISTANT (85 DEGREES C)
ANNEX A - SAMPLING OF CABLES
ANNEX B - COMMITTEE COMPOSITION
Specifies general requirements of single and multicore cables/cords with rigid as well as flexible annealed bare/tinned copper and aluminium conductor, insulated and sheathed (if any) with polyvinyl chloride (PVC) for rated voltages up to and including 1100 V a.c., 50 Hz used in electric power and lighting cables for outdoor and low temperature use.
| Committee |
ETD 9
|
| DevelopmentNote |
Supersedes BIS IS 3035-1. (09/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Supersedes |
| BIS IS 1391-2 : 1992 AMD 4 2014 | ROOM AIR CONDITIONERS - SPECIFICATION - PART 2: SPLIT AIR CONDITIONERS |
| BIS SP 72 : 2010(R2014) | NATIONAL LIGHTING CODE 2010 |
| BIS IS 1293 : 2005 AMD 6 2013 | PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION |
| BIS IS 15368 : 2003 | CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BIS IS 15908 : 2011 | SELECTION, INSTALLATION AND MAINTENANCE OF CONTROL AND INDICATING EQUIPMENTS FOR FIRE DETECTION AND ALARM SYSTEM - CODE OF PRACTICE |
| BIS IS 302-2-209 : 1994(R2015) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS - SECTION 209: LOW SPEED FOOD GRINDING MACHINES |
| BIS IS 302-2-12 : 1993(R2004) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SPECIFICATION - PART 2: PARTICULAR REQUIREMENTS - SECTION 12: WARMING PLATES AND SIMILAR APPLIANCES |
| BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BIS IS/IEC 60898-1 : 2002 | ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION |
| BIS IS 13252 : 2003 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS |
| BIS IS 1258 : 2005(R2015) | BAYONET LAMP HOLDERS |
| BIS IS 302-1 : 2008 AMD 3 2014 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BIS IS 1476-1 : 2000(R2015) | PERFORMANCE OF HOUSEHOLD REFRIGERATING APPLIANCE - REFRIGERATORS WITH OR WITHOUT LOW TEMPERATURE COMPARTMENT - PART 1: ENERGY CONSUMPTION AND PERFORMANCE |
| BIS IS 10322-1 : 2014 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BIS IS 3854 : 1997(R2017) | SWITCHES FOR DOMESTIC AND SIMILAR PURPOSES - SPECIFICATION |
| BIS IS 3177 : 1999(R2004) | CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES |
| BIS IS 302-2-45 : 1994(R2004) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS - SECTION 45: ELECTRIC HEATING TOOLS |
| BIS IS 4905 : 2014 | RANDOM SAMPLING AND RANDOMIZATION PROCEDURES |
| BIS IS 10810-4 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 4: PERSULPHATE TEST OF CONDUCTOR |
| IS 10810 : Part 43 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 43: INSULATION RESISTANCE |
| BIS IS 10810-45 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 45: HIGH VOLTAGE TEST |
| IS 10810 : Part 11 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 11: THERMAL AGEING IN AIR |
| IEC 60227-4:1992+AMD1:1997 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring |
| IEC 60228:2004 | Conductors of insulated cables |
| BIS IS 10810-0 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 0: GENERAL |
| BIS IS 10810-3 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 3: WRAPPING TEST FOR ALUMINIUM WIRES |
| BIS IS 10810-1 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 1: ANNEALING TEST FOR WIRES USED AS CONDUCTORS |
| BIS IS 10810-10 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 10: LOSS OF MASS TEST |
| IEC 60227-3:1993+AMD1:1997 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring |
| IS 10810 : Part 58 : 1998 (R2014) | METHOD OF TESTS FOR CABLES - PART 58: OXYGEN INDEX TEST |
| BIS IS 5831 : 1984(R2016) | SPECIFICATION FOR PVC INSULATION AND SHEATH OF ELECTRIC CABLES |
| IEC 60227-2:1997+AMD1:2003 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
| BIS IS 10810-5 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 5: CONDUCTOR RESISTANCE TEST |
| BIS IS 1885-32 : 1993(R2004) | ELECTROTECHNICAL VOCABULARY - PART 32: ELECTRIC CABLES |
| IS 10810 : Part 53 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 53: FLAMMABILITY TEST |
| BIS IS 10418 : 1982(R2016) | DRUMS FOR ELECTRIC CABLES |
| IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60719:1992 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| IS 10810-21 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 21: COLD IMPACT TEST |
| IS 10810-59 : 1988(R2015) | METHODS OF TEST FOR CABLES - PART 59: DETERMINATION OF THE AMOUNT OF HALOGEN ACID GAS EVOLVED DURING COMBUSTION OF POLYMERIC MATERIALS TAKEN FROM CABLES |
| IS 10810 : Part 20 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 20: COLD BEND TEST |
| BIS IS 8130 : 2013(R2015) | CONDUCTORS FOR INSULATED ELECTRIC CABLES AND FLEXIBLE CORDS - SPECIFICATION |
| BIS IS 10810-60 : 1988(R2015) | METHODS OF TEST FOR CABLES - PART 60: THERMAL STABILITY OF PVC INSULATION AND SHEATH |
| IEC 60050-461:2008 | International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
| BIS IS 13360-6-9 : 2001 | PLASTICS - METHODS OF TESTING - PART 6: THERMAL PROPERTIES - SECTION 9: DETERMINATION OF DENSITY OF SMOKE FROM THE BURNING OR DECOMPOSITION OF PLASTICS |
| IS 10810 : Part 14 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 14: HEAT SHOCK TEST |
| IS 10810 : Part 44 : 1984(R2016) | Methods of test for cables:Part 44 Spark test |
| BIS IS 10810-12 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 12: SHRINKAGE TEST |
| BIS IS 10810-15 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 15: HOT DEFORMATION TEST |
| BIS IS 10810-6 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 6: THICKNESS OF THERMOPLASTIC AND ELASTOMERIC INSULATION AND SHEATH |
| BIS IS 10810-64 : 2003(R2008) | METHODS OF TEST FOR CABLES - PART 64: MEASUREMENT OF TEMPERATURE INDEX |
| BIS IS 10810-2 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 2: TENSILE TEST FOR ALUMINIUM WIRES |
| BIS IS 10810-7 : 1984(R2016) | METHODS OF TEST FOR CABLES - PART 7: TENSILE STRENGTH AND ELONGATION AT BREAK OF THERMOPLASTIC AND ELASTOMERIC INSULATION AND SHEATH |
| IEC 60227-5:2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.