BS 1610-2:1985
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Materials testing machines and force verification equipment Specification for the grading of equipment used for the verification of the forces applied by materials testing machines
Hardcopy , PDF
15-03-1995
English
31-07-1985
Foreword
Committees responsible
Specification
Section one. General
1.1 Scope
1.2 Definitions
Section two. Grading of verification equipment
2.1 Proving devices
2.2 Verification masses
2.3 Proving levers
Section three. Method of calibration of proving devices
3.1 General
3.2 Proving device
3.3 Calibration forces
3.4 Preliminary procedure
3.5 Calibration procedure
3.6 Calculation of results
Appendix
A Correction applied to the deflection of a proving
device when calibrated at a temperature other than
20 deg C
Tables
1 Preliminary requirements for grading of proving
devices
2 Grading of proving devices for repeatability and
interpolation
3 Calibration forces
Describes the requirements for the grading of proving devices, masses and proving levels used for the force verification of materials testing machines and describes the method of calibration for proving devices.
| Committee |
ISE/101
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 376:2011 | Similar to |
| BS 4175:1989 | Methods for superficial hardness test (Rockwell method) and for verification of superficial hardness testing machines (Rockwell method) |
| BS 240:1986 | Method for Brinell hardness test and for verification of Brinell hardness testing machines |
| BS 1377-9:1990 | Methods for test for soils for civil engineering purposes In-situ tests |
| BS 1924-1:1990 | Stabilized materials for civil engineering purposes General requirements, sampling, sample preparation and tests on materials before stabilization |
| BS 1377-1:1990 | Methods of test for soils for civil engineering purposes General requirements and sample preparation |
| BS 1722-12:1990 | Fences Specification for steel palisade fences |
| DEFSTAN 47-12/4(1987) : 1987 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| SAEITC TSC47-012_04 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| BS 1610-3:1990 | Materials testing machines and force verification equipment Specification for the grading of the forces applied by deadweight and lever creep testing machines |
| 08/30142158 DC : DRAFT NOV 2008 | BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES |
| BS 427:1990 | Method for Vickers hardness test and for verification of Vickers hardness testing machines |
| BS 6319-11:1993 | Testing of resin and polymer/cement compositions for use in construction Methods for determination of creep in compression and in tension |
| BS 812-110:1990 | Testing aggregates Methods for determination of aggregate crushing value (ACV) |
| BS 1610-1:1985 | Materials testing machines and force verification equipment. Specification for the grading of the forces applied by materials testing machines |
| BS 3396-3:1987 | Woven glass fibre fabrics for plastics reinforcement Specification for finished fabrics for use with polyester resin systems |
| BS 7457:1994 | Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS 2782-3:Method 327A:1993 | Methods of testing plastics. Mechanical properties Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
| BS 3691:1990 | Specification for E glass fibre rovings for reinforcement of polyester and epoxy resin systems |
| BS 4841-3:1994 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs |
| BS 4370-2:1993 | Methods of test for rigid cellular materials Methods 7 to 9 |
| BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
| BS 4429:1987 | Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications |
| BS 4370-1:1988 | Methods of test for rigid cellular materials Methods 1 to 5 |
| BS 1881-115:1986 | Testing concrete Specification for compression testing machines for concrete |
| BS 4370-4:1991 | Methods of test for rigid cellular materials Method 14. Determination of flexural properties |
| BS 4841-3:1987 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs |
| BS 1400:1985 | Specification for copper alloy ingots and copper alloy and high conductivity copper castings |
| BS 7457:1991 | Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS DD185(1990) : 1990 | METHOD FOR DETERMINATION OF CREEP STIFFNESS OF BITUMEN AGGREGATE MIXTURES SUBJECT TO UNCONFINED UNIAXIAL LOADING |
| BS 6994:1988 | Specification for steel shackles for lifting and general engineering purposes: grade M(4) |
| BS 5834-4:1989 | Surface boxes, guards and underground chambers for gas and waterworks purposes Specification for preformed chambers |
| BS 812-100:1990 | Testing aggregates General requirements for apparatus and calibration |
| BS 1881-127:1990 | Testing concrete Method of verifying the performance of a concrete cube compression machine using the comparative cube test |
| BS 812-111:1990 | Testing aggregates Methods for determination of ten per cent fines value (TFV) |
| BS 891:1989 | Methods for hardness test (Rockwell method) and for verification of hardness testing machines (Rockwell method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.