BS 3G 231:1997
Current
The latest, up-to-date edition.
Specification for conductors for general-purpose aircraft electrical cables and aerospace applications
Hardcopy , PDF
English
15-01-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Specification
1 Scope
2 Informative references
3 Materials
4 Construction
5 Electrical resistance after insulation
6 Tests
7 Packaging and labelling
Annex
A (normative) Corresponding mass per unit length of
silver for a nominal 1 mn radial thickness
Tables
1 Conductor material
2 Concentric stranded conductors prior to insulation
3 Rope stranded conductors prior to insulation
4 Electrical resistance of concentric stranded
conductors after insulation
5 Tensile strength and elongation at break of
conductor prior to insulation
6 Tensile strength and elongation at break of
conductor after insulation
A.1 Corresponding mass per unit length of silver for a
nominal 1 mn radial thickness
List of references
Defines dimensions and performance requirements for multi-strand circular conductors in two conditions, ie prior to application of insulation and after insulation, as processing during manufacture of cable could change the characteristics of the conductor.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 96/703766 DC and BS 2G231(1990) (07/2005) Reviewed and confirmed by BSI, December 2009. (11/2009)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard specifies dimensions and performance requirements for multi-strand circular conductors in two distinct conditions:
- prior to application of insulation; and
- after insulation, since processing during cable manufacture may change the conductor characteristics.
The conductors specified in this standard are for general-purpose aircraft electrical cables for aerospace applications over the nominal cross-sectional area range 0.1 mm2 to 107 mm2.
NOTE. This standard does not apply to conductors for fire-resistant cables, thermocouple extension cables or equipment wire.
| DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| DEFSTAN 61-12(PT0)/3(2011) : 2011 | WIRES, CORDS AND CABLES ELECTRICAL METRIC UNITS - PART 0: GENERAL REQUIREMENTS AND TEST METHODS GENERIC SPECIFICATION |
| DEFSTAN 00-970(PT7)SEC7/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
| DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 61-12(PT0)/2(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 0: GENERAL REQUIREMENTS AND TEST METHODS - GENERAL SPECIFICATION |
| DEFSTAN 00-970(PT7)SEC7/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 61-12(PT26)/3(2001) : 2001 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 26: WIRES AND CABLES ELECTRICAL, DUAL EXTRUDED INSULATION TYPE OLEFIN/VINYLIDEN-FLUORIDE AND SCREENED AND JACKETED - SECTIONAL SPECIFICATION |
| DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| DEFSTAN 00-970(PT7)SEC7/3(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| BS 3G 230:2000 | Specification for general requirements for aircraft electrical cables (second series) |
| BS ISO 2635 : 2003 | AIRCRAFT - CONDUCTORS FOR GENERAL PURPOSE AIRCRAFT ELECTRICAL CABLES AND AEROSPACE APPLICATIONS - DIMENSIONS AND CHARACTERISTICS |
| DEFSTAN 61-12(PT33)/3(2000) : 2000 | WIRES, CORDS AND CABLES, ELECTRICAL PART 33: AIRFRAME WIRES AND CABLES IN THE TEMPERATURE CATEGORIES OF 135 DEGREE CENTIGRADE, 150 DEGREE CENTIGRADE, 200 DEGREE CENTIGRADE AND 260 DEGREE CENTIGRADE SECTIONAL SPECIFICATION |
| DEFSTAN 00-970(PT1)SEC6/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 6: EQUIPMENT |
| ISO 2635:2003 | Aircraft Conductors for general purpose aircraft electrical cables and aerospace applications Dimensions and characteristics |
| DEFSTAN 00-970(PT1)SEC6/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| ISO 2635:2003 | Aircraft Conductors for general purpose aircraft electrical cables and aerospace applications Dimensions and characteristics |
| BS G 222:1976 | Specification for Efglas type electric cables (metric units) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.