BS 4604-2:1970
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK - METRIC SERIES - HIGHER GRADE (PARALLEL SHANK)
Hardcopy , PDF
30-03-2010
English
01-01-1970
Co-operating organizations
Foreword
Specification
1 General
1.1 Scope
1.2 Definitions
1.3 Conditions of use
2 Materials and dimensions
2.1 Bolts, nuts and washers
2.2 Length of bolt
3 Design
3.1 Design procedure
3.2 Surfaces in contact
3.3 Holes in members
3.4 Minimum ply thickness
4 Assembly
4.1 General
4.2 Method of tightening
4.3 Calibration
5 Inspection
5.1 Inspection procedure
Appendix
A Test for slip factor
Tables
1 Bolt length allowance
2 Proof loads and shank tensions for bolts
Figure
1 Typical test specimen
Specifies rules for the use in structural steelwork of high strength friction grip bolts, with parallel shanks, of the higher grade. Covers definitions, conditions of use, length of bolt, design procedure, surfaces in contact, holes in members, minimum ply thickness, method of tightening, calibration, inspection procedure and test for slip factor.
Committee |
B/521
|
DevelopmentNote |
Supersedes 69/17577 DC (08/2005) Reviewed and confirmed by BSI, February 2007. (01/2007)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
UNE-EN 1993-1-9:2013 | Identical |
17/30349707 DC : DRAFT AUG 2017 | BS 5975:2018 - CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
BS 5950-1:1985 | Structural use of steelwork in building Code of practice for design in simple and continuous construction: hot rolled sections |
BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
BS 5950-1:2000 | Structural use of steelwork in building Code of practice for design. Rolled and welded sections |
BS 5950-1:1990 | Structural use of steelwork in building Code of practice for design in simple and continuous construction: hot rolled sections |
BS 2573-1:1983 | Rules for the design of cranes Specification for classification, stress calculations and design criteria for structures |
BS 4395-2:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
BS 2799:1974 | Specification for power-driven tower cranes for building and engineering construction |
BS 7644-1:1993 | Direct tension indicators. Specification for compressible washers |
BS 4604-3:1973 | Specification for the use of high strength friction grip bolts in structural steelwork. Metric series Higher grade (waisted shank) |
BS 4465:1989 | Specification for design and construction of electric hoists for both passengers and materials |
BS 466:1984 | Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use |
BS 5950-7:1992 | STRUCTURAL USE OF STEELWORK IN BUILDING - SPECIFICATION FOR MATERIALS AND WORKMANSHIP: COLD FORMED SECTIONS |
07/30150912 DC : 0 | BS 5975 - CODE OF PRACTICE FOR THE PROCEDURAL CONTROL OF TEMPORARY WORKS AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
BS 4395-3:1973 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers |
BS 5975:1996 | Code of practice for falsework |
BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
BS 3139-1:1959 | Specification for high strength friction grip bolts for structural engineering. General grade bolts |
BS 3294-1:1960 | Specification for the use of high strength friction grip bolts in structural steelwork General grade bolts |
BS 4604-1:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
BS PD 5686(1969) : LATEST | THE USE OF SI UNITS |
BS 3763:1970 | The International System of units (SI) |
BS 4395-2:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.