BS 47-1:1991
Current
The latest, up-to-date edition.
Fishplates for railway rails Specification for rolled steel fishplates
Hardcopy , PDF
English
28-02-1991
Committees responsible
Foreword
Specification
1 Scope
2 Manufacture
3 Chemical composition
4 Dimensions and properties
5 Marking
6 Tensile properties
7 Templates and working gauges
8 Freedom from defects
9 Finishing
10 Tolerances
11 Chemical analysis
12 Tensile tests
13 Manufacturer's test and certificate
14 Inspection
Appendices
A Batch inspection procedure
B Holing of rails to BS 11; dimensions of fishbolts and
nuts to BS 64 and section properties of fishplates
C Information to be supplied by the purchaser of the
fishplates
Tables
1 Chemical composition
2 Dimensional and finished tolerances
3 Length and holing of fishplates (imperial dimensions)
4 Length and holing of fishplates (metric dimensions)
5 Areas, calculated masses and properties for rolled
fishplate bar and finished fishplates in imperial
units
6 Areas, calculated masses and properties for rolled
fishplate bar and finished fishplates in metric units
Figures
1 Referee gauge for checking fishplate height (h)
2 Method for checking longitudinal straightness in a
vertical direction
3 Key to tables 3 and 4
4 Fishplates for flat bottom rail No. 50 'O'
5 Fishplates for flat bottom rail No. 60 A
6 Fishplates for flat bottom rail No. 60 R
7 Fishplates for flat bottom rail No. 70 A
8 Fishplates for flat bottom rail No. 75 A
9 Fishplates for flat bottom rail No. 75 R
10 Fishplates for flat bottom rail No. 80 A
11 Fishplates for flat bottom rail No. 80 R
12 Angled fishplates for flat bottom rail No. 80 R
13 Fishplates for flat bottom rail No. 80 'O'
14 Fishplates for flat bottom rail No. 90 A
15 Fishplates for flat bottom rail No. 90 R
16 Fishplates for flat bottom rail No. 95 A
17 Fishplates for flat bottom rail No. 95 R
18 Fishplates for bull head rail No. 95 RBH
19 Skirted fishplates for bull head rail No. 95 RBH
20 Fishplates for flat bottom rail No. 95 N
21 Fishplates for flat bottom rail No. 100 A
22 Fishplates for flat bottom rail No. 100 R
23 Fishplates for flat bottom rail Nos. 110 A and 113 A
24 Progressive sampling plan - Wald method
25 Progressive sampling plan for inspection of
resubmitted batches
Requirements for fishplates manufactured to the corresponding rail sections in BS 11.
Committee |
RAE/2
|
DevelopmentNote |
Supersedes BS 47(1959) (11/2004) Supersedes 88/43327 DC. (07/2005) Reviewed and confirmed by BSI, March 2010. (02/2010)
|
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This Part of BS 47 specifies the chemical composition and tensile property requirements for the steel used, and the dimensions and tolerances of rolled steel fishplates intended for use with railway rails of linear mass equal to or greater than 24.8 kg/m (50 lb/yd).
The provisions of this specification are not restricted to fishplates for use with rails that comply with BS 11 and may be applied to fishplates for any rail section of 24.8 kg/m (50 lb/yd) or greater linear mass.
NOTE 1 Whilst this standard does not specify requirements for forged or cast fishplates some of its provisions may be applied to such products where appropriate.
NOTE 2 Recommended batch inspection procedures are described in Appendix A. The section properties are given for information in Appendix B. Information to be supplied by the purchaser is given in Appendix C.
NOTE 3 The titles of the publications referred to in this standard are listed on the inside back cover.
Standards | Relationship |
ISO 6305-1:1981 | Similar to |
BS 64:1992 | Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
BS 11:1959 | Flat bottom railway rails |
BS 64:1992 | Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
BS 5750-2:1987 | Quality systems Specification for production and installation |
BS 5750-3:1987 | Quality systems Specification for final inspection and test |
BS 5750-1:1987 | Quality systems Specification for design/development, production, installation and servicing |
BS 113(1920) : LATEST | SHEET STEELS FOR AIRCRAFT, SCHEDULE OF |
BS 11:1985 | Specification for railway rails |
BS 6001(1972) : AMD 5054 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - SPECIFICATION FOR SAMPLING PLANS INDEXED BY ACCEPTABLE QUALITY LEVEL (AQL) FOR LOT - BY - LOT INSPECTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.