DEFSTAN 60-1(PT0)/1(1992) : 1992
|
CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL |
DEFSTAN 61-12(PT30)/1(1987) : 1987
|
WIRES, CORDS, AND CABLES ELECTRICAL - METRIC UNITS - PART 30: WIRES AND CABLES, TAPED AND EXTRUDED PTFE/GLASS INSULATION, TYPES UNIFLEXEFGLAS AND UNIFLEXEFGLASMET 150 DEGREES SILVER PLATED CONDUCTORS |
BS 5750-4:1990
|
Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\' |
DEFSTAN 61-3(PT1)/4(1990) : 1990
|
BATTERIES, PRIMARY - GENERAL SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY, EXCLUDING LITHIUM |
DEFSTAN 61-9(PT1)/4(1993) : INTERIM
|
GENERIC SPECIFICATION FOR BATTERIES, RECHARGEABLE, SECONDARY - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 61-3/5(1992) : INTERIM
|
GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY |
BS 7720:1994
|
Specification for non-biological sterilization indicator systems for use in the Bowie and Dick test with alternative test loads |
DEFSTAN 61-12(PT9)/3(1990) : 1990
|
WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS |
BS 5892-3:1982
|
Railway rolling stock material (metric) Specification for monobloc wheels for traction and trailing stock |
BS 7000-1:1989
|
Design management systems Guide to managing product design |
PD 3542:1991
|
The role of standards in company quality management |
BS 8202-2:1992
|
Coatings for fire protection of building elements Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance |
BS EN 1283:1996
|
Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits |
BS 3858:1992
|
Specification for binding and identification sleeves for use on electric cables and wires |
BS 2574-3:1990
|
Lower limb orthoses Method for the determination of mechanical properties of metal knee joint and side member assemblies |
BS 8103-4:1995
|
Structural design of low-rise buildings Code of practice for suspended concrete floors for housing |
BS 6001-3:1993
|
Sampling procedures for inspection by attributes Specification for skip-lot procedures |
BS 5724-1(1989) : 1989 AMD 6715
|
MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY |
BS 7159:1989
|
Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
BS 5892-4:1992
|
Railway rolling stock materials Specification for forged and rolled tyres |
BS 1894:1992
|
Specification for design and manufacture of electric boilers of welded construction |
BS 5882:1990
|
Specification for a total quality assurance programme for nuclear installations |
BS 5892-3(1992) : 1992
|
RAILWAY ROLLING STOCK MATERIALS - PART 3: SPECIFICATION FOR MONOBLOC WHEELS FOR TRACTION AND TRAILING STOCK |
BS EN 50089:1992
|
Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
BS 1425-1:1991
|
Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles Specification for fillings and stuffings other than feather and/or down |
BS 3970-1:1990
|
Sterilizing and disinfecting equipment for medical products Specification for general requirements |
BS 4778-2:1991
|
Quality vocabulary Quality concepts and related definitions |
BS 2745-2:1993
|
Washer-disinfectors for medical purposes Specification for human waste container washer-disinfectors |
BS 5892-1(1992) : 1992
|
RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK |
BS 4881:1993
|
Specification for polypropylene film cords, lines and twines |
BS 1560-3.2:1989
|
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for cast iron flanges |
BS 5750-3:1987
|
Quality systems Specification for final inspection and test |
BS 2745-3:1993
|
Washer-disinfectors for medical purposes Specification for washer-disinfectors except those used for processing human-waste containers and laundry |
BS 7750:1994
|
Specification for environmental management systems |
BS 7165:1991
|
Recommendations for achievement of quality in software |
BS 47-1:1991
|
Fishplates for railway rails Specification for rolled steel fishplates |
BS 2646-1:1993
|
Autoclaves for sterilization in laboratories Specification for design, construction, safety and performance |
BS EN 50059:1991
|
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
BS 7850-1:1992
|
Total quality management Guide to management principles |
BS EN 928:1996
|
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices |
BS EN 724:1995
|
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices |
BS 0-3:1991
|
A standard for standards Guide to drafting and presentation of British Standards |
BS QC 001002:1991
|
Rules of procedure of the IEC quality assessment system for electronic components (IECQ) |
BS 5892-2:1992
|
Railway rolling stock materials Specification for forged and rolled wheel centres |
BS 2646-1:1988
|
Autoclaves for sterilization in laboratories Specification for design and construction |
BS 9000-4:1991
|
General requirements for a system for electronic components of assessed quality Specification of procedures for the approval of an organization |
BS 7750:1992
|
Specification for environmental management systems |
BS EN 30011-1:1993
|
Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing |
BS 3598:1998
|
Fissile materials. Criticality safety in handling and processing. Recommendations |
BS 5892-1:1983
|
Railway rolling stock material (metric) Specification for axles for traction and trailing stock |
BS 903-1:1995
|
Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS 3843-3:1992
|
Guide to terotechnology (the economic management of assets) Guide to the available techniques |
BS 4940-2:1994
|
Technical information on construction products and services Guide to content and arrangement |
BS 64:1992
|
Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
BS 7727:1994
|
Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 |
BS CECC 00016:1991
|
Harmonized system of quality assessment for electronic components. Basic specification: basic requirements for the use of statistical process control (SPC) in the CECC system |
BS 2724:1987
|
Specification for sun glare eye protectors for general use |
BS 7336:1990
|
Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels |
BS 751:1992
|
Specification for steel baseplates for flat bottom railway rails |
BS 6143:1981
|
Guide to the determination and use of quality related costs |