BS 4727-2:GRP08(1986) : 1986
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GLOSSARY OF ELECTROTECHNICAL POWER TELECOMMUNICATION ELECTRONICS LIGHTING AND COLOUR TERMS - TERMS PARTICULAR TO POWER ENGINEERING - ELECTRIC CABLE TERMINOLOGY
Hardcopy , PDF
15-04-1994
English
01-01-1986
A glossary of terms associated with the power engineering industry with particular emphasis on electric cables. It covers guide to the glossary, committees responsible, foreword, conductors, insulations, electrical screens and shields, cabling, coverings and various components, cables in general pressure cables, aerial insulated cables, special cables, terminations, joints, miscellaneous accessories, practices of laying, shield bonding, shield bonding accessories.
Committee |
GEL/1
|
DevelopmentNote |
BS DRAFT 93/207993 DC REFERS TO AMD
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
DEFSTAN 61-12(PT27)/2(1994) : 1994 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 27: CABLES AND WIRES ELECTRICAL FOR POWER CONNECTIONS TO MOBILE EQUIPMENT |
DEFSTAN 61-12(PT18)/3(1990) : 1990 AMD 3 1993 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, EQUIPMENT WIRES, LIMITED FIRE HAZARD |
DEFSTAN 61-12(PT18)/2(1985) : 1985 CORR | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS PT 18 EQUIPMENT WIRES, LIMITED FIRE HAZARD |
BS 7655-6.1(1994) : 1994 | SPECIFICATION FOR INSULATING AND SHEATHING MATERIALS FOR CABLES - THERMOPLASTIC SHEATHING COMPOUNDS HAVING LOW EMISSION OF CORROSIVE GASES, AND SUITABLE FOR USE IN CABLES HAVING LOW EMISSION OF SMOKE WHEN AFFECTED BY FIRE - GENERAL APPLICATION THERMOPLASTIC TYPES |
BS 7197:1990 | Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
BS 638-4:1979 | Arc welding power sources, equipment and accessories Specification for welding cables |
BS 6500:1994 | Specification for insulated flexible cords and cables |
BS 7655-1.1(1993) : 1993 | INSULATING AND SHEATHING MATERIALS FOR CABLES - ELASTOMERIC INSULATING COMPOUNDS - HARMONIZED TYPES |
BS 7655-4.1(1993) : 1993 | INSULATING AND SHEATHING MATERIALS FOR CABLES - PVC SHEATHING COMPOUNDS - HARMONIZED TYPES |
BS 4553:1992 | Specification for 600/1000 V PVC-insulated single-phase split concentric cables with copper conductors for electricity supply |
BS 7655-1.4:1993 | Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds Oil resisting types |
BS 6883:1969 | Specification for elastomer-insulated cables for fixed wiring in ships |
BS 7655-2.2:1993 | Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds Heat resisting types |
BS 7655-3.1(1993) : 1993 | INSULATING AND SHEATHING MATERIALS FOR CABLES - PVC INSULATING COMPOUNDS - HARMONIZED TYPES |
BS 6346:1989 | Specification for PVC-insulated cables for electricity supply |
BS 7655-5.1(1994) : 1994 | SPECIFICATION FOR INSULATING AND SHEATHING MATERIALS FOR CABLES - CROSS LINKED INSULATING COMPOUNDS HAVING LOW EMISSION OF CORROSIVE GASES, AND SUITABLE FOR USE IN CABLES HAVING LOW EMISSION OF SMOKE WHEN AFFECTED BY FIRE - HARMONIZED CROSS LINKED TYPES |
BS 6622:1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
BS 7655-2.6:1993 | Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds Sheathing compounds for ships wiring and offshore applications |
BS 7655-2.3:1993 | Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds General application |
BS 7655-1.5:1993 | Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds Flame retardant composites |
BS 7655-0:1993 | Specification for insulating and sheathing materials for cables General introduction |
BS 7655-1.3:1993 | Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds XLPE |
BS 7655-4.3:1993 | Specification for insulating and sheathing materials for cables. PVC sheathing compounds Special applications RF cables |
BS 6121-1:1989 | Mechanical cable glands Specification for metallic glands |
BS 6724:1990 | Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire |
BS 6724:1986 | Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire |
BS 6121-3:1990 | Mechanical cable glands Specification for special corrosion resistant glands |
BS 7211:1989 | Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire |
BS 6195:1993 | Specification for insulated flexible cables and cords for coil leads |
BS 6469-99.2:1992 | Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811 Electrical tests |
BS 6346:1987 | Specification for PVC-insulated cables for electricity supply |
BS 6883:1991 | Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units |
BS 5467:1989 | Specification for cables with thermosetting insulation for electricity supply for rated voltages of up to and including 600/1000 V and up to and including 1900/3300 V |
BS 7655-3.2:1993 | Specification for insulating and sheathing materials for cables. PVC insulating compounds Hard grade types |
BS 7211:1994 | Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire |
BS 7655-4.2:1993 | Specification for insulating and sheathing materials for cables. PVC sheathing compounds General application |
BS 7655-1.6:1993 | Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds Coil end lead types |
BS 7655-1.2(1993) : 1993 | INSULATING AND SHEATHING MATERIALS FOR CABLES - ELASTOMERIC INSULATING COMPOUNDS - GENERAL 90 DEGREE C APPLICATION |
BS 7655-2.4:1993 | Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds Welding cable covering |
BS 7655-2.1(1993) : 1993 | INSULATING AND SHEATHING MATERIALS FOR CABLES - ELASTOMERIC SHEATHING COMPOUNDS - HARMONIZED TYPES |
BS 5055:1991 | Specification for elastomer-insulated cables for electric signs and high-voltage luminous-discharge-tube installations |
BS 6141:1981 | Specification for insulated cables and flexible cords for use in high temperature zones |
BS 7215:1990 | Specification for separable insulated cable connector systems above 1 kV and up to 36 kV |
BS 6007:1993 | Specification for rubber-insulated cables for electric power and lighting |
BS 6141:1991 | Specification for insulated cables and flexible cords for use in high temperature zones |
BS 6387:1994 | Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
BS 6480:1988 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
BS 6121-2:1989 | Mechanical cable glands Specification for polymeric glands |
BS 6485:1990 | Specification for PVC-covered conductors for overhead power lines |
BS 6121-1:1987 | Mechanical cable glands Specification for metallic glands |
BS 5463:1977 | Specification for a.c. switches of rated voltage above 1 kV |
BS 6207:1987 | Specification for mineral-insulated copper-sheathed cables with copper conductors |
BS 6469:1984 | Methods of test for insulation and sheaths of electric cables |
BS 4999-101:1987 | General requirements for rotating electrical machines Specification for rating and performance |
BS 6207:1991 | Specification for mineral-insulated copper-sheathed cables with copper conductors |
BS 7540:1992 | Guide to use of cables with a rated voltage not exceeding 450/750 V |
BS 6081:1989 | Specification for terminations for mineral-insulated cables |
BS 6469:1990 | Methods of test for insulation and sheaths of electric cables |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.