BS 4873:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium alloy windows and doorsets. Specification
Hardcopy , PDF
29-02-2016
English
28-02-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Handing
5 Components
6 Construction and design
7 Glazing
8 Use, cleaning and maintenance
9 Security
10 Safety in case of fire
11 Safety in use
12 Weathertightness
13 Operation and strength characteristics
14 Hygiene, health and the environment
15 Acoustic performance
16 Energy conservation
17 Marking
Annexes
Annex A (informative) - Guidance on the evaluation of
conformity
Annex B (informative) - Durability and recycling
Annex C (normative) - Specification for handing
Bibliography
Describes requirements for the design, construction and performance of aluminium alloy windows and glazed doorsets, solid or thermally improved, intended to be installed vertically (+/-15 degrees), including constituent materials and glazing.
| Committee |
B/538/1
|
| DevelopmentNote |
Supersedes BS 4873(2004) and 08/30143160 DC. (02/2009)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6375-3(2009) : 2009 | PERFORMANCE OF WINDOWS AND DOORS - PART 3: CLASSIFICATION FOR ADDITIONAL PERFORMANCE CHARACTERISTICS AND GUIDANCE ON SELECTION AND SPECIFICATION |
| BS 644:2012 | Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification |
| BS EN 12020-2:2016 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form |
| BS ISO 11600:2002 | Building construction. Jointing products. Classification and requirements for sealants |
| BS 5544:1978 | Specification for anti-bandit glazing (glazing resistant to manual attack) |
| BS 1186-2:1988 | Timber for and workmanship in joinery Specification for workmanship |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| BS EN 13141-1:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Externally and internally mounted air transfer devices |
| BS 6100-6:2008 | Building and civil engineering. Vocabulary Construction parts |
| BS 6496:1984 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
| BS EN 12519:2004 | Windows and pedestrian doors. Terminology |
| BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
| BS 6375-2:2009 | Performance of windows and doors Classification for operation and strength characteristics and guidance on selection and specification |
| BS 8000-7:1990 | Workmanship on building sites Code of practice for glazing |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| BS EN 755-9:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
| BS 6100-11:2007 | Building and civil engineering. Vocabulary Performance characteristics, measurement and joints |
| BS EN 1063:2000 | Glass in building. Security glazing. Testing and classification of resistance against bullet attack |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS 8213-4:2007 | Windows, doors and rooflights Code of practice for the survey and installation of windows and external doorsets |
| BS 6100-1:2004 | Building and civil engineering. Vocabulary General terms |
| BS EN 356:2000 | Glass in building. Security glazing. Testing and classification of resistance against manual attack |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| BS ISO 6707-1:2014 | Buildings and civil engineering works. Vocabulary General terms |
| BS 6100-12:2008 | Building and civil engineering. Vocabulary Plant, equipment and persons |
| BS EN 12365-1:2003 | Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Performance requirements and classification |
| BS EN 12373-1:2001 | Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS 6375-3(2009) : 2009 | PERFORMANCE OF WINDOWS AND DOORS - PART 3: CLASSIFICATION FOR ADDITIONAL PERFORMANCE CHARACTERISTICS AND GUIDANCE ON SELECTION AND SPECIFICATION |
| BS EN 14024:2004 | Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.