89/106/EEC : 1988

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS

Available format(s):

Superseded date: 09-03-2011

Language(s):

Published date: 12-01-2013

Publisher: European Union

Abstract - (Show below) - (Hide below)

Applies to construction products, which are defined as any products produced with a view to their incorporation in a permanent manner in construction works. Products may only be placed on the market if they are fit for their intended use. They must be such that works in which they are incorporated satisfy the essential requirements with regard to mechanical strength and stability, safety in case of fire, hygiene, health and the environment, safety in use, protection against noise and energy economy and heat retention for an economically reasonable working life.

General Product Information - (Show below) - (Hide below)

Document Type	Miscellaneous Product
ISBN
Pages
Published
Publisher	European Union
Status	Superseded
Superseded By	305/2011 : 2011 AMD 2 2014

Standards Referenced By This Book - (Show below) - (Hide below)

08/30169534 DC : DRAFT APR 2008	BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
PD CEN/TR 16410:2012	Construction products. Assessment of release of dangerous substances. Barriers to use. Extension to CEN/TR 15855 Barriers to trade
11/30249117 DC : 0	BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
11/30205541 DC : 0	BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
15/30320587 DC : DRAFT AUG 2015	BS 6744 - STAINLESS STEEL BARS - REINFORCEMENT OF CONCRETE - REQUIREMENTS AND TEST METHODS
04/30111755 DC : 0	EN 14909 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
BS EN 60335-2-91:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
99/100965 DC : DRAFT FEB 1999	PREN 13493 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN SOLID WASTE STORAGES AND WASTE DISPOSAL SITES
BS EN 14846:2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
BS EN 15288-1 : 2008	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS 8303-1:1994	INSTALLATION OF DOMESTIC HEATING AND COOKING APPLIANCES BURNING SOLID MINERAL FUELS - INSTALLATION OF DOMESTIC HEATING AND COOKING APPLIANCES BURNING SOLID MINERAL FUELS - SPECIFICATION FOR THE DESIGN OF INSTALLATIONS
13/30271503 DC : 0	BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
DIN EN 15701 E : 2017	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
BS EN 14695:2010	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
14/30287372 DC : 0	BS EN 12897 - WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
BS EN 10088-5:2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
12/30256100 DC : 0	BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
I.S. EN 50399:2011	COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
BS EN 14064-1:2010	THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
12/30235100 DC : DRAFT JAN 2012	BS EN 14428 AMD 1 - SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
PREN 13859-2 : DRAFT 2013	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
BS EN 15069 : 2008	SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
11/30239917 DC : 0	BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
12/30254424 DC : DRAFT JAN 2012	BS EN 12058 - NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS
12/30263172 DC : 0	BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
DIN EN 14695:2010-05	Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version EN 14695:2010
DIN EN 54-25 E : 2009	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
13/30217369 DC : 0	BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
10/30212171 DC : 0	BS EN 15037-5 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
BS 10621(2007) : 2007	THIEF RESISTANT DUAL-MODE LOCK ASSEMBLY
PREN 12897 : DRAFT 2014	WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
09/30203195 DC : 0	BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 14695 E : 2010	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
08/30169531 DC : DRAFT APR 2008	BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
05/30134359 DC : DRAFT MAY 2005	EN 15101-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL CELLULOSE PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
BS EN 10343:2009	STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 16687:2015	Construction products. Assessment of release of dangerous substances. Terminology
BS EN 60335-2-71:2003	Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
BS 8747:2007	Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
DIN EN 15643-4:2012-04	Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
12/30259207 DC : DRAFT JUNE 2012	BS EN 13984 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
BS DD9999(2005) : 2005	CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS
05/30128013 DC : DRAFT JULY 2005	BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS
BS EN 15285:2008	AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
I.S. EN 60335-2-16:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD))
09/30196835 DC : 0	BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION
04/101694 DC : DRAFT JAN 2004	EN 544 - BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS
06/30148769 DC : 0	EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS
PREN 14342 : DRAFT 2011	WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 16687:2015	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - TERMINOLOGY
BS EN 15101-1:2013	THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
I.S. EN 16497-2:2017	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
S.R. CEN/TR 16410:2012	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - BARRIERS TO USE - EXTENSION TO CEN/TR 15855 BARRIERS TO TRADE
I.S. EN 60335-2-99:2003/A1:2019	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
PREN 13967 : DRAFT 2011	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
I.S. EN 60335-2-28:2003&A1:2008&A11:2018	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
BS EN 15368 : 2008	HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
S.R. CEN/TR 16098:2010	CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - CONCEPT OF HORIZONTAL TESTING PROCEDURES IN SUPPORT OF REQUIREMENTS UNDER THE CPD
I.S. EN 60335-2-41:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
I.S. EN 15643-5:2017	SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK ON SPECIFIC PRINCIPLES AND REQUIREMENT FOR CIVIL ENGINEERING WORKS
PREN 15650 : DRAFT 2017	VENTILATION FOR BUILDINGS - FIRE DAMPERS
EN 15102:2007+A1:2011	Decorative wall coverings - Roll and panel form
BS EN 13493:2013	GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
UNI 11531-1 : 2014	CONSTRUCTION AND MAINTENANCE FOR INFRASTRUCTURE CIVIL BUILDING - CRITERIA FOR MATERIALS USE - PART 1: SOILS AND MIXTURES OF UNBOUND AGGREGATES
BS EN 15382:2013	GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
EN 15101-1:2013	Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
EN ISO/TS 15874-7 : 2003	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
NF EN 777-4 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
DIN EN 12201-5:2011-11	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
DIN EN 14909 E : 2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
DIN EN 12201-1:2011-11	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN 13859-1:2014-07	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
BS EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 12966-1 : 2005	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
BS EN 13492:2013	GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
BS EN 40-4:2005	Lighting columns Requirements for reinforced and prestressed concrete lighting columns
BS EN 12094-7:2001	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
BS EN 12094-2:2003	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 1304:2013	Clay roofing tiles and fittings. Product definitions and specifications
BS EN 13063-3:2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
BS EN 517:2006	PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS
BS EN 15266:2007	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
03/318326 DC : DRAFT NOV 2003
BS EN 179:2008	Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 450-1:2012	Fly ash for concrete Definition, specifications and conformity criteria
DIN EN 15266 E : 2007	STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
BS EN 12604:2000	Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
BS EN 416-1:2009	Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
BS EN 12899-4:2007	FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL
BS EN 1856-1:2009	Chimneys. Requirements for metal chimneys System chimney products
BS EN 681-2:2000	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
BS EN 14889-2:2006	FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY
EN 197-2:2014	Cement - Part 2: Conformity evaluation
BS EN 12899-1:2007	Fixed, vertical road traffic signs Fixed signs
BS EN 13564-1:2002	Anti-flooding devices for buildings Requirements
BS EN 14933:2007	Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
BS EN 12809 : 2001	RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
BS EN 295-7:2013	Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
BS EN 12899-3 : 2007	FIXED, VERTICAL ROAD TRAFFIC SIGNS - DELINEATOR POSTS AND RETROREFLECTORS
BS EN 13658-2:2005	Metal lath and beads. Definitions, requirements and test methods External rendering
UNE-EN 60695-8-2:2017	Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
BS EN 295-1:2013	Vitrified clay pipe systems for drains and sewers Requirements for pipes, fittings and joints
BS EN 1991-1-7 : 2006	EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
BS EN 1338:2003	Concrete paving blocks. Requirements and test methods
BS EN 14390:2007	Fire test. Large-scale room reference test for surface products
BS EN 998-1:2016	Specification for mortar for masonry Rendering and plastering mortar
BS EN 13967 : 2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
BS EN 12094-8:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 1339:2003	Concrete paving flags. Requirements and test methods
BS EN 681-1:1996 (published 2006-03)	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
BS EN 10340:2007	STEEL CASTINGS FOR STRUCTURAL USES
BS EN 520 : 2004	GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 13501-3 : 2005	FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS
BS EN 14992 : 2007	PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
BS EN 312:2010	Particleboards. Specifications
BS EN 14989-1:2007	Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances
BS EN 12380:2002	Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
BS EN 14964:2006	RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
BS EN 14566 : 2008	MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 12591:2009	Bitumen and bituminous binders. Specifications for paving grade bitumens
BS EN 12259-4:2000	Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms
EN 13263-2:2005+A1:2009	Silica fume for concrete - Part 2: Conformity evaluation
DIN EN 54-17:2006-03	Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 14229:2010	Structural timber - Wood poles for overhead lines
EN 13084-7:2012	Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 1337-8:2007	Structural bearings - Part 8: Guide Bearings and Restraint Bearings
BS 6915(2001) : 2001	DESIGN AND CONSTRUCTION OF FULLY SUPPORTED LEAD SHEET ROOF AND WALL COVERINGS - CODE OF PRACTICE
EN 60335-2-99:2003	Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
EN 1337-7:2004	Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
EN 12259-5:2002	Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN 12860:2001/AC:2002	GYPSUM BASED ADHESIVES FOR GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12101-1:2005/A1:2006	SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
EN 12201-2:2011+A1:2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
EN 60335-2-39:2003/A2:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
EN 12352 : 2006	TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
EN 13501-3:2005+A1:2009	Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
EN 10242:1994/A2:2003	THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 13274-7:2008	Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
EN 12201-5:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 1057:2006+A1:2010	Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 12899-4:2007	Fixed, vertical road traffic signs - Part 4: Factory production control
EN 10224:2002/A1:2005	NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
DIN EN 15701:2017-02	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
BS 7543:2003	GUIDE TO DURABILITY OF BUILDINGS AND BUILDING ELEMENTS, PRODUCTS AND COMPONENTS
EN 10088-4:2009	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10219-1:2006	Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 13032-3:2007	Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
EN 10210-1:2006	Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 12259-1:1999 + A1:2001/A3:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 1: SPRINKLERS
EN 13225:2013	Precast concrete products - Linear structural elements
EN 12899-2:2007	Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
EN 12899-1:2007	Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 1051-2:2007	Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
EN 13245-2:2008/AC:2009	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
EN 10311:2005	Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
EN 12966-3 : 2005	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL
EN 12094-7:2000/A1:2005	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
EN 12273:2008	Slurry surfacing - Requirements
EN 13055-1:2002/AC:2004	LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 12004:2007+A1:2012	Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
EN 60335-2-84:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
EN 12809:2001/A1:2004/AC:2007	RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
EN 1123-1:1999/A1:2004	PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL
EN 60695-8-2:2017	Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 1013:2012+A1:2014	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 60335-2-38:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
CEN/TS 16526:2013	Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
EN 12859:2011	Gypsum blocks - Definitions, requirements and test methods
EN 13263-1:2005+A1:2009	Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 12259-4:2000/A1:2001	Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
BS 8529:2010	Composite doorsets. Domestic external doorsets. Specification
EN 12271:2006	Surface dressing - Requirements
EN 12259-3:2000/A2:2005	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
EN 13341:2005+A1:2011	Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 1090-1:2009+A1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
BS 3621(2007) : 2007	THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS
EN 60335-2-12 : 2003 AMD 1 2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
EN 13084-5:2005/AC:2006	FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS
EN 12951:2004	Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
NF EN ISO 15876-2 : 2017	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 2: PIPES
BS 9999:2008	CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS
EN 1319:2009	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 13055-2:2004	Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 1337-4:2004/AC:2007	STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1337-6:2004	Structural bearings - Part 6: Rocker bearings
EN 1337-5:2005	Structural bearings - Part 5: Pot bearings
EN 13229:2001/A2:2004/AC:2007	INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 12966-1:2005+A1:2009	Road vertical signs - Variable message traffic signs - Part 1: Product standard
EN 12094-2:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
BS 8621(2007) : 2007	THIEF RESISTANT LOCK ASSEMBLY - KEYLESS EGRESS
EN 1168:2005+A3:2011	Precast concrete products - Hollow core slabs
BS 3621:2004	THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS
EN 12094-8:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
BS 4873:2016	ALUMINIUM ALLOY WINDOWS AND DOORSETS - SPECIFICATION
EN 12101-7:2011	Smoke and heat control systems - Part 7: Smoke duct sections
EN 1338:2003/AC:2006	CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
EN 12899-3:2007	Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
EN 1304:2013	Clay roofing tiles and fittings - Product definitions and specifications
EN 12094-6:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
EN 40-7:2002	Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
BS EN 1457:1999	CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
BS 6203:2003	Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
NF EN 10025-6 : 2005 + A1 2009	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
NF EN 13353 : 2009 + A1 2011	SOLID WOOD PANELS (SWP) - REQUIREMENTS
BS EN 15821:2010	Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
98/109040 DC : DRAFT NOV 1998	PREN 13362 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF CANALS
BS EN 15283-1 : 2008	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
08/30169546 DC : DRAFT APR 2008	BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
05/30131069 DC : DRAFT MAR 2005	EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
S.R. 82:2017	SLATING AND TILING - CODE OF PRACTICE
12/30258581 DC : 0	BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
UNI EN 15643-4 : 2012	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
BS EN 1090-1 : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS EN 12101-7:2011	Smoke and heat control systems Smoke duct sections
BS EN 15743 : 2010	SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
NF EN 15368 : 2009 + A1 2010	HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
00/101411 DC : DRAFT FEB 2000	BS EN 13815 - FIBROUS GYPSUM PLASTER PRODUCTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
04/30104415 DC : DRAFT AUG 2004	EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
DIN EN 14967 E : 2006	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
01/107225 DC : DRAFT OCT 2001	PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS
12/30254418 DC : DRAFT JAN 2012	BS EN 1469 - NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS
PREN 1935 : DRAFT 2012	BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
PREN 14064-1 : DRAFT 2016	THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
BS EN 13565-1 : 2003	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
01/105394 DC : DRAFT JULY 2001	PREN 13024-2 - THERMALLY TOUGHENED BOROSILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY
BS EN 16497-2:2017	Chimneys. Concrete System Chimneys Balanced flue applications
PREN 13255 : DRAFT 2011	GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
13/30273039 DC : 0	BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
NF EN 15285 : 2008	AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
BS EN 15600-1:2010	Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
PD 476-3:2012	Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\'
DIN EN 15288-1:2010-12	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
13/30275356 DC : 0	BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
03/102517 DC : 0	BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS
10/30216654 DC : 0	BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
12/30254896 DC : 0	BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION
DIN EN 54-24 E : 2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BS EN 15650:2010	Ventilation for buildings. Fire dampers
NF EN 15824 : 2017	SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
11/30248435 DC : 0	BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
BS 8529:2017	Composite doorsets. Domestic external doorsets, Specification
NF EN 14989-2 : 2008	CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR INDIVIDUAL ROOM SEALED APPLIANCES
PD 6682-3:2003	Aggregates Aggregates for mortar. Guidance on the use of BS EN 13139
BS EN 15286:2013	Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
PD CEN/TR 15858:2009 (published 2009-04)	Construction products. Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures
PREN 13859-1 : DRAFT 2013	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
12/30254421 DC : DRAFT JAN 2012	BS EN 12057 - NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS
06/30158054 DC : DRAFT NOV 2006	BS 3621 AMD 1 - THIEF RESISTANT LOCK ASSEMBLY - KEY EGRESS
16/30339191 DC : 0	BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION
99/100964 DC : DRAFT FEB 1999	PREN 13492 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES OR TRANSFER STATIONS
BS EN 1999-1-2:2007	Eurocode 9. Design of aluminium structures Structural fire design
03/115371 DC : DRAFT SEP 2003	EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES
BIP 2081 : 2012	A GUIDE TO EMERGENCY LIGHTING
PREN 490 : DRAFT 2011	CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS
PREN 12150-2 : DRAFT 2017	GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
BS EN 13274-7:2008	RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 7: DETERMINATION OF PARTICLE FILTER PENETRATION
PREN 14783 : DRAFT 2012	FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
NF EN 15715 : 2010	THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
EN 15643-4:2012	Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
PREN 14908-6 : DRAFT 2014	OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 6: APPLICATION ELEMENTS
I.S. EN 60695-8-2:2017	FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
I.S. EN 60335-2-47:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV))
BS EN 60335-2-88:2002	Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
I.S. EN 60335-2-82:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
I.S. EN 60335-2-81:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV))
BS EN 14592 : 2008	TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 60335-2-74:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
BS EN 15037-2 : 2009	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 2: CONCRETE BLOCKS
BS EN 15814 : 2011	POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
I.S. EN 15288-1:2008	SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS EN 16361 : 2013	POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION
I.S. EN 60335-2-9:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD))
BS EN 54-7:2001	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
CEI CLC/TR 50456 : 2008	ALARM SYSTEMS - GUIDELINES TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR EQUIPMENT OF ALARM SYSTEMS
EN 60335-2-74:2003/A2:2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
BS EN 15129:2009	Anti-seismic devices
BS EN 14908-6:2014	Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol Application elements
I.S. EN 15814:2011	POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
FD CEN/TR 15677 : 2008 FD	FLY ASH OBTAINED FROM CO-COMBUSTION - A REPORT ON THE SITUATION IN EUROPE
12/30268937 DC : 0	BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
UNE-EN 50399:2012	Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
PREN 14933 : DRAFT 2004	LIGHT WEIGHT FILL AND INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
DIN EN 54-7:2015-07 (Draft)	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
UNE-EN 15288-1:2009	Swimming pools - Part 1: Safety requirements for design
NF EN 12273 : 2008	SLURRY SURFACING - REQUIREMENTS
PREN 50575 : DRAFT 2012	POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
ISO/TS 15875-7:2003	Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
BS EN 60335-2-12 : 2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
EN 13565-1:2003+A1:2007	Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
CEN ISO/TS 21003-7:2008/A1:2010	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 485-2:2016	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
I.S. EN 60335-2-48:2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV))
EN 60335-2-9:2003/A13:2010/AC:2012	Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
NF EN 777-2 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
NF EN 777-3 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
DIN EN 12842:2012-11	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 1858:2016-08 (Draft)	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
CEI EN 60695-6-2 : 2013	FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN 15088 E : 2006	ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 13970:2005-02	Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
DIN EN 54-23 :2010-06	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
DIN EN 598:2009-10	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
DIN EN 54-20 E : 2009	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
DIN EN 15266:2007-08	Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
DIN EN 54-18 E : 2006	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES
DIN EN 14390:2007-04	Fire test - Large-scale room reference test for surface products
UNE-EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
BS EN 544:2011	BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN 14991:2007	PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
BS EN 10242:1995	Threaded pipe fittings in malleable cast iron
BS EN 598 : 2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 13055-2:2004	LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
BS EN 295-4:2013	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
BS EN 14317-1:2004	Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
UNE-EN 545:2011	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS EN 13241-1 : 2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
UNE-EN 12201-5:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
BS EN 13032-3:2007	Measurement and presentation of photometric data of lamps and luminaires Presentation of data for emergency lighting of work places
UNE-EN 14909:2013	Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
BS EN 13084-5:2005	Free-standing chimneys Material for brick liners. Product specifications
BS EN 13748-1 : 2004	TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US
BS EN 13502:2002	CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR CLAY/CERAMIC FLUE TERMINALS
BS EN 40-7:2002	Lighting columns Requirements for fibre reinforced polymer composite lighting columns
BS EN 1337-5:2005	STRUCTURAL BEARINGS - PART 5: POT BEARINGS
BS EN 13859-2:2014	Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for walls
I.S. EN 13859-1:2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
I.S. EN 13984:2013	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
I.S. EN 1858:2008	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
EN 1917:2002/AC:2008	CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
I.S. EN 598:2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 12842:2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 969:2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 12201-5:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
EN 1916:2002/AC:2008	CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
I.S. EN 12201-2:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
I.S. EN 12201-3:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
I.S. EN 14909:2012	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
I.S. EN 13707:2013	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 1857:2010-08	Chimneys - Components - Concrete flue liners
DIN EN 14188-2:2005-03	JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS
DIN EN 12094-8:2006-07	Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
I.S. EN 312:2010	PARTICLEBOARDS - SPECIFICATIONS
I.S. EN 12201-1:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN 13859-2:2014	FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
I.S. EN 545:2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
DIN EN 12352:2006-07	Traffic control equipment - Warning and safety light devices
I.S. EN 12352:2006	TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
DIN EN 13032-3:2007-12	Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
I.S. EN 10255:2004	NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 1857:2010	CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
I.S. EN 12094-8:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
UNI EN 13970 : 2007	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN WATER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
UNI EN 13984 : 2013	FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
BS 5502-23:2004	Buildings and structures for agriculture Fire precautions. Code of practice
BS 6739:2009	CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS: INSTALLATION DESIGN AND PRACTICE
BS 5655-11:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts
PD 6682-6:2003	AGGREGATES - PART 6: AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORKS AND ROAD CONSTRUCTION - GUIDANCE ON THE USE OF OF BS EN 13242
BS 6510:2010	Steel-framed windows and glazed doors. Specification
BS PD6682-2(2009) : 2009	AGGREGATES - PART 2: AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS - GUIDANCE ON THE USE OF BS EN 13043
PD 7974-3:2011	Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin
BS PD6682-1(2009) : 2009	AGGREGATES - PART 1: AGGREGATES FOR CONCRETE - GUIDANCE ON THE USE OF BS EN 12620
BS 6510:2005	STEEL-FRAMED WINDOWS AND GLAZED DOORS
BS 476-10:2009	FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS
BS 4933:2010	SPECIFICATION FOR ISO METRIC BLACK CUP AND COUNTERSUNK HEAD BOLTS AND SCREWS WITH HEXAGON NUTS
BS 644:2012	Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 7412:2007	Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
BS 644:2009	TIMBER WINDOWS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION
BS 5655-12:2005	Lifts and service lifts Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 8103-3:2009	STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING
PD 6608:1998	GUIDE TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR ALARM SYSTEMS
BS 434-2:2006	Bitumen road emulsions Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
BS 1245:2012	Pedestrian doorsets and door frames made from steel sheet. Specification
NF EN 1463-1 : 2009	ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS
EN 1279-5:2005+A2:2010	Glass in building - Insulating glass units - Part 5: Evaluation of conformity
I.S. EN 16485:2014	ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
BS EN 14055 : 2010	WC AND URINAL FLUSHING CISTERNS
DIN EN 14967:2006-08	Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
12/30256417 DC : 0	BS EN 54-31 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
I.S. EN ISO/TS 15876-7:2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
07/30170129 DC : 0	BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
DIN EN 15650 E : 2010	VENTILATION FOR BUILDINGS - FIRE DAMPERS
PREN 12842 : DRAFT 2010	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN 54-23:2010-06	Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
BS EN 50290-4-2:2014	COMMUNICATION CABLES - PART 4-2: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - GUIDE TO USE
BS EN 15643-4:2012 (published 2012-02)	Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance
PD CEN/TR 15438:2007	PLASTICS PIPING SYSTEMS - GUIDANCE FOR CODING OF PRODUCTS AND THEIR INTENDED USES
PD 6682-2:2003	Aggregates Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043
I.S. EN 12966-3:2005	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL
BS EN 15599-1:2010	Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation
11/30239935 DC : 0	BS EN 13255 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
08/30181473 DC : DRAFT JULY 2008	BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
11/30239938 DC : 0	BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
97/102971 DC : DRAFT APR 1997	PREN 12843 - PRECAST CONCRETE MASTS AND POSTS
12/30264370 DC : 0	BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
00/108536 DC : 0	PREN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
BS EN 15037-1:2008	PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
UNE-EN 16687:2016	Construction products - Assessment of release of dangerous substances - Terminology
NF EN ISO 13943 : 2018	FIRE SAFETY - VOCABULARY
BS 5908-2:2012	Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
PREN 14782 : DRAFT 2015	SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN 14695 : 2010	FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
02/710115 DC : DRAFT AUG 2002	PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
NF EN 54-24 : 2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
11/30239929 DC : 0	BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS)
16/30333945 DC : 0	BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS
BS EN 1013 : 2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30273036 DC : 0	BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
99/712245 DC : DRAFT AUG 1999	PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS
PD CEN/TR 16098:2010 (published 2010-12)	Construction products. Assessment of release of dangerous substances. Concept of horizontal testing procedures in support of requirements under the CPD
TR 103 056 : 1.1.1	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SYSTEM REFERENCE DOCUMENT; SHORT RANGE DEVICES (SRD); TECHNICAL CHARACTERISTICS FOR SRD EQUIPMENT FOR SOCIAL ALARM AND ALARM APPLICATIONS