BS 5410-1:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes
Hardcopy , PDF
31-12-2014
English
29-12-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Committees responsible
Foreword
Section 1. General
1.1 Scope
1.2 References
Section 2. Liquid fuels
2.1 Types of petroleum oil fuels
2.2 Fuel oil characteristics
Section 3. Appliances and burners
3.1 Types of appliance
3.2 Types of burner
Section 4. Installation of oil fired appliances
4.1 General
4.2 Selection of appliance
4.3 Siting of appliance
4.4 Provision for air for combustion and ventilation
4.5 Protection
4.6 Special installations
4.7 Appliance temperature and its relation to surrounding
building materials
Section 5. Oil storage tanks and equipment
5.1 Types
5.2 Capacity
5.3 Oil level indicators and gauges
5.4 Overfilling alarm and signalling system
5.5 Pressure unloading device
5.6 Filling pipes and connection
5.7 Vent pipes
5.8 Filtration system
Section 6. Accommodation for oil storage tanks for single
family dwellings
6.1 General
6.2 Siting of oil storage tanks
6.3 Methods of tank protection
6.4 Requirements for tank accommodation
6.5 Secondary containment (bunds)
6.6 Integrally bunded tanks
Section 7. Installation of tanks
7.1 General
7.2 Supports for steel tanks
7.3 Supports for plastic tanks
7.4 Painting and cleaning of steel tanks
Section 8. Oil system from storage tank to burner
8.1 Fuel supply systems
8.2 Fuel feed pipework
8.3 Fire valve types and installation
Section 9. Flues and chimneys
9.1 Chimneys and connecting flue pipes
9.2 Choice of materials
9.3 Construction of masonry or flueblock chimneys
9.4 Factory made insulated chimneys (system chimneys)
9.5 Plastic chimney systems
9.6 Connecting flue pipes
9.7 Chimney terminals
9.8 Position of chimney terminals for open flued appliances
Section 10. Installation of flues and chimneys
10.1 Design and installation of flues and chimneys
10.2 Size and height of chimneys
10.3 Shared chimneys
10.4 Masonry chimneys
10.5 Installation of flue pipes
10.6 Dampers
10.7 Inspection and cleaning
10.8 Inspection on site
Section 11. Room sealed appliances
11.1 General
11.2 Mounting
11.3 Sizing
11.4 Terminal design and location
Section 12. Special categories of flue system
12.1 Flue systems for use with condensing appliances
12.2 Balanced compartment
Section 13. Electrical and control recommendations
13.1 General
13.2 Purpose of controls
Section 14. Commissioning
Section 15. Maintenance
15.1 General
15.2 Access for maintenance
15.3 Maintenance of combustion equipment
15.4 Maintenance of oil storage tanks
15.5 Oil supply system
15.6 Safety controls
15.7 System safety
15.8 Manuals and maintenance records
Section 16. Refurbishments and conversions of existing
appliances
16.1 General
16.2 Technical recommendations
Annex A (informative) Example of a chimney designation in
accordance with BS EN 1443:2003
List of references
Conducts with oil burning installations up to 45 kW output capacity for space heating and hot water supply purposes and associated oil tanks up to 3 500 l. Also applicable to, where relevant, to oil fired cookers where these are connected to flues.
| Committee |
RHE/13
|
| DevelopmentNote |
Supersedes BS 5410-1(1977). (03/2001) Supersedes 95/713558 DC and 99/716843 DC. (01/2002) Supersedes 04/30093973 DC. (12/2006) Reviewed and confirmed by BSI, November 2008. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
70
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| EN 15287-2:2008 | Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| EN 12391-1:2003 | Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
| BS 5588-6:1991 | Fire precautions in the design, construction and use of buildings Code of practice for places of assembly |
| BS 2869(2010) : 2010 | FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
| BS EN 15287-2:2008 | Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances |
| BS 6380(2012) : 2012 | GUIDE TO LOW TEMPERATURE PROPERTIES AND COLD WEATHER USE OF DIESEL FUELS AND GAS OILS |
| BS 3632:2005 | Residential park homes. Specification |
| S.R. 54:2014 | CODE OF PRACTICE FOR THE ENERGY EFFICIENT RETROFIT OF DWELLINGS |
| BS 5588-10:1991 | Fire precautions in the design, construction and use of buildings Code of practice for shopping complexes |
| BS EN 12391-1:2003 | Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances |
| BS 6380:1997 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 9991:2011 | Fire safety in the design, management and use of residential buildings. Code of practice |
| BS 9999:2008 | Code of practice for fire safety in the design, management and use of buildings |
| BS 5440-2:2000 | Installation and maintenance of flues and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation and maintenance of ventilation for gas appliances |
| BS 5410-2:2013 | Code of practice for oil firing Installations over 45 kW output capacity for space heating, hot water and steam supply services |
| BS 7880:1997 | Code of practice for draught control of existing doors and windows in housing using draughtstrips |
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS EN 13502:2002 | Chimneys. Requirements and test methods for clay/ceramic flue terminals |
| BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
| BS EN 1857 : 2003 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| BS EN 13063-1:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance |
| BS EN 12391-1:2003 | Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances |
| BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
| BS EN 303-2:2017 | Heating boilers Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| BS EN 13384-1 : 2002 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| BS EN 13384-2 : 2003 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| BS EN 13069:2005 | Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods |
| BS 41:1973 | Specification for cast iron spigot and socket flue or smoke pipes and fittings |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| BS 6999:1989 | Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW |
| BS 7671(2001) : 2001 AMD 14905 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| BS EN 1457:1999 | Chimneys. Clay/ceramic flue liners. Requirements and test methods |
| BS 5449:1990 | Specification for forced circulation hot water central heating systems for domestic premises |
| BS EN 1443:2003 | Chimneys. General requirements |
| BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
| BS EN 722-1:2004 | Leisure accommodation vehicles. Liquid fuel heating systems Caravans and caravan holiday homes |
| BS 9125:1988 | Specification for capability approval of manufacturers of passive radio interference suppression filter units of assessed quality generic data |
| BS EN 12446:2011 | Chimneys. Components. Concrete outer wall elements |
| BS EN 293:1992 | Specification for oil pressure atomizing nozzles. Minimum requirements. Testing |
| BS EN 13063-2:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions |
| BS EN ISO 4126-1 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013) |
| BS 5422:2001 | Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS 799-8:1988 | Oil burning equipment Specification for connecting dimensions between atomizing oil burners and heat generators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.