BS 594-1:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures
Hardcopy , PDF
15-06-2005
English
27-08-2003
Committees responsible
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Constituent materials
5 Hot rolled asphalt mixtures
6 Mixing
7 Coated chippings for application to surface course surfaces
8 Sampling and testing
Annex A (informative) Guidance on the selection of materials
and mixtures
Annex B (informative) Recommendations for the application of design
test criteria
Annex C (informative) Specifying hot rolled asphalt
Annex D (informative) Guidance on the selection of performance
related design criteria for surface course
mixtures
Annex E (normative) Specifying performance specified hot rolled
asphalt
Bibliography
Provides requirements for mixtures of hot rolled asphalt to be laid as surface course, regulating course, binder course or base (roadbase) on roads and other paved areas, excluding heavy duty airfield pavements.
Committee |
B/510
|
DevelopmentNote |
Supersedes BS 594-1(2002) (09/2003)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
Supersedes |
BS EN 933-9 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
BS EN 12697-5:2009 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the maximum density |
BS 598-110:1998 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods of test for the determination of wheel-tracking rate and depth |
BS EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval) |
BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
BS EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
BS EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method |
BS EN 933-1:2012 | Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method |
BS EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
BS EN 933-5:1998 | Tests for geometrical properties of aggregates Determination of percentage of crushed and broken surfaces in coarse aggregate particles |
BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
BS EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates Determination of water suction height |
BS EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates Determination of loose bulk density and voids |
BS 410-1:2000 | Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
BS EN 933-4:2008 | Tests for geometrical properties of aggregates Determination of particle shape. Shape index |
BS EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock |
PD 6682-9:2003 | Aggregates Guidance on the use of European test method standards |
BS EN 933-6:2014 | Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates |
BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
BS EN 933-7:1998 | Tests for geometrical properties of aggregates Determination of shell content. Percentage of shells in coarse aggregates |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven |
BS EN 933-2:1996 | Tests for geometrical properties of aggregates Determination of particle size distribution. Test sieves, nominal size of apertures |
ASTM D 2041 : 2003 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
BS 598-107:1990 | Sampling and examination of bituminous mixtures for roads and other paved areas Method of test for the determination of the composition of design wearing course rolled asphalt |
BS EN 932-1:1997 | Tests for general properties of aggregates Methods for sampling |
BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
BS 410-2:2000 | Test sieves. Technical requirements and testing Test sieves of perforated metal plate |
BS 598-108:1990 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods for determination of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings |
BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
BS 598-109:1990 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods for the assessment of the compaction performance of a roller and recommended procedures for the measurement of the temperature of bituminous mixtures |
BS EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
BS 3195-3:1987 | Methods for sampling petroleum products Method for sampling bituminous binders |
BS EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
BS 598-101:1987 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods for preparatory treatments of samples for analysis |
BS EN 932-2:1999 | Tests for general properties of aggregates Methods for reducing laboratory samples |
BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
BS EN 933-10:2009 | Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving) |
BS 598-102:1996 | Sampling and examination of bituminous mixtures for roads and other paved areas Analytical test methods |
PD 6682-2:2003 | Aggregates Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043 |
BS EN 933-8 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
BS 598-100:1987 | Sampling and examination of bituminous mixtures for roads and other paved areas Methods for sampling for analysis |
BS EN 932-3:1997 | Tests for general properties of aggregates Procedure and terminology for simplified petrographic description |
BS EN 932-6:1999 | Tests for general properties of aggregates Definitions of repeatability and reproducibility |
BS EN 933-3:2012 | Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index |
BS EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler |
BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.