BS 6374-3:1984
Current
The latest, up-to-date edition.
Lining of equipment with polymeric materials for the process industries Specification for lining with stoved thermosetting resins
Hardcopy , PDF
English
31-08-1984
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Committees responsible
Specification
Section one. General
1.1 Scope
1.2 Definitions
1.3 Exchange of information
1.4 Compliance
Section two. Design, fabrication and surface finish
of equipment to be lined
2.1 General
2.2 Design of equipment to be lined
2.3 Fabrication of equipment to be lined
Section three. Selection and quality of linings
3.1 Selection of lining
3.2 Quality of lining
3.3 Continuity of finished linings
Section four. Method of lining
4.1 Surface preparation
4.2 Lining process
Section five. Inspection and testing
5.1 Responsibility for inspection and testing
5.2 Inspection
Section six. Methods of test
6.1 Continuity testing
Section seven. Rectification of faults in fully cured
linings
7.1 General
Section eight. Storage, handling, transportation and
installation
8.1 General
Appendices
A Characteristics of lining materials specified in
3.1
B Continuity testing
Figures
1 Pipework details
2 Weld profile details: butt welds
3 Weld profile details: external corners and edges
4 Weld profile details: internal corners and edges
5 Weld profile details: concave heads
6 Weld profile details: flanges
Requirements for lining equipment for process industries including choice and application of lining, rectification of faults, storage, handling, transportation and installation of lined equipment. Applies to thermosetting resin-based linings applied as thin coatings and stoved. Prerequisites necessary for successful lining of equipment (design, construction, etc.) are also specified.
| Committee |
PVE/1
|
| DevelopmentNote |
Supersedes BS CP3003-1(1967), BS CP3003-3(1965) and BS CP3003-5(1966) (07/2004) Supersedes 81/78490 DC (09/2005) Reviewed and confirmed by BSI, October 2012. (09/2012)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This Part of BS 6374 specifies requirements for the lining of equipment for the process industries using stoved thermosetting resins.
It includes requirements for the choice of lining and its application and also requirements for subsequent inspection of the lining and the rectification of faults.
NOTE. The linings may be applied at the applicator\'s works or on site.
Requirements for design and fabrication of the equipment and the state of preparation necessary for the surfaces to be lined are specified in section two.
Requirements for storage, handling, transportation and installation of the lined equipment are specified in section eight.
This Part of this standard does not apply to equipment manufactured in cast iron or concrete.
NOTE. The titles of the publications referred to in this standard are listed on the inside back cover.
| BS 0-3:1991 | A standard for standards Guide to drafting and presentation of British Standards |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| NACE 11 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS 358:1960 | Method for the measurement of voltage with sphere-gaps (one sphere earthed) |
| BS 2451:1963 | Specification for chilled iron shot and grit |
| BS 1755-1:1982 | Glossary of terms used in the plastics industry Polymer and plastics technology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.