BS 6716:1986
Current
The latest, up-to-date edition.
Guide to properties and types of rubber
Hardcopy , PDF
English
31-07-1986
Foreword
Committees responsible
Guide
1. Scope
2. Rubbers commercially available
3. Properties of vulcanized rubbers
4. Types of rubber
5. Cellular materials
6. Ebonite
7. Latex
8. Designing a rubber component
Appendices
A. British Standards for rubber and rubber products
B. Index
Tables
1. Rubbers in general use
2. Less common rubbers
3. Relationship between hardness and medium strain
shear modulus
4. Heat resistance of rubbers
5. Low temperature resistance of rubbers
Figure
1. Scheme for selection of type of rubber
Guidance for designers and users of rubber products on the properties of rubbers and the associated test methods, and on the terms used in the rubber industry.
Committee |
PRI/54
|
DevelopmentNote |
Supersedes 84/35977 DC (09/2005) Reviewed and confirmed by BSI, January 2011. (12/2010)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
British Standards Institution
|
Status |
Current
|
This British Standard gives designers and users of rubber products guidance on the properties and types of rubber, associated test methods and terms used in the rubber industry. It draws attention to relevant British Standards in this field. Guidance is also included on designing a rubber component for a particular end-use.
NOTE The titles of the publications referred to in this standard are listed on the inside back cover.
DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
BS 7442-0:1991 | Rubber or plastics covered rollers Introduction |
BS 903-0:2003 | Physical testing of rubber General |
BS 2775:1987 | Specification for rubber stoppers and tubing for general laboratory use |
BS 903-0:2012 | Physical testing of rubber General |
BS 903-A58:1990 | Physical testing of rubber Methods using the Mooney viscometer |
11/30244285 DC : 0 | BS 903-0:2011 - PHYSICAL TESTING OF RUBBER - PART 0 - GENERAL |
BS 903-1:1995 | Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS 5176:1975 | Specification for classification system for vulcanized rubbers |
BS 3650:1976 | Specification for oil-extended styrene-butadiene rubbers (SRB). Non-pigmented, emulsion polymerized, general purpose types (1700 series) |
BS 903-A50:1984 | Methods of testing vulcanized rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer) |
BS 903-A43:1982 | Methods of testing vulcanized rubber. Determination of resistance to ozone cracking (static strain test) |
BS 3574:1963 | Recommendations for the storage of vulcanized rubber |
BS 2782-3 Method 359:1984 | Methods of testing plastics. Mechanical properties Determination of Charpy impact strength of rigid materials (Charpy impact flexural test) |
BS 903-A30:1975 | Physical testing of rubber Determination of the permeability of rubber to gases (constant pressure method) |
BS 2782-3 Method 365D:1978 | Methods of testing plastics. Mechanical properties Determination of hardness of plastics and ebonite by the ball indentation method |
BS 2782-1 Method 121A and 121B:1991 | Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress |
BS 903-A39:1980 | Methods of testing vulcanized rubber. Determination of compression set under constant deflection at low temperatures |
BS 903-A8:1963 | Methods of testing vulcanized rubber. Determination of rebound resilience |
BS 903-A37:1979 | Assessment of adhesion to and corrosion of metalsPhysical testing of rubber |
ISO/TR 7620:2005 | Rubber materials — Chemical resistance |
BS 3472:1974 | Specification for styrene-butadiene rubber (SBR) - non-pigmented, emulsion polymerized, general purpose types (1500 series) |
BS 903-A48:1984 | Methods of testing vulcanized rubber. Determination of static adhesion to textile cord (H-pull test) |
BS 903-A49:1984 | Physical testing of rubber Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles) |
BS 903-C2:1982 | Physical testing of rubber Determination of volume resistivity |
BS 1134-1:1972 | Method for the assessment of surface texture Method and instrumentation |
BS 903-A9:1957 | Methods of testing vulcanized rubber. Determination of abrasion resistance |
BS 903-A44:1983 | Physical testing of rubber Determination of resistance to ozone cracking (dynamic strain test) |
BS 5294:1976 | Method of test. Determination of crystallization effects in rubbers by hardness measurements |
BS 903-A26:1969 | Physical testing of rubber Determination of hardness |
BS 1134-2:1972 | Method for the assessment of surface texture General information and guidance |
BS 3734:1978 | Specification for dimensional tolerances of solid moulded and extruded rubber products |
BS 903-A14:1970 | Methods of testing vulcanized rubber. Determination of modulus in shear of rubber (bonded quadruple shear test piece) |
BS 4396:1976 | Specification. Raw natural rubber |
BS 2752:1982 | Specification for chloroprene rubber compounds |
BS 903-A46:1984 | Methods of testing vulcanized rubber. Determination of vapour transmission rate of volatile liquids through rubber sheet and rubber coated fabrics |
BS 3502-3:1978 | Schedule of common names and abbreviations for plastics and rubbers. Rubbers and latices |
BS 903-A42:1983 | Methods of testing vulcanized rubber. Determination of stress relaxation |
BS 903-A51:1986 | Methods of testing vulcanized rubber. Determination of resistance to tension fatigue |
BS 903-A25:1968 | Methods of testing vulcanized rubber. Determination of impact brittleness temperature |
BS 4443(1969) : LATEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.