BS 8204-1(2003) : 2003
Current
The latest, up-to-date edition.
SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
Hardcopy , PDF
English
01-01-2003
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Exchange of information and time schedule
5 Materials
6 Design considerations
7 Work on site
8 Inspection and testing of bases and levelling screeds
Annex A (normative) - Recommendations for the use of
lightweight aggregates in concrete bases and
levelling screeds
Annex B (informative) - Guidance for specifying fine
aggregates for cementitious levelling screeds:
comparison of the grading and fines content
of aggregates in BS EN 13139 with established
UK practice
Annex C (normative) - Methods for the assessment of
levels and surface regularity
Annex D (normative) - Method for the determination of
in situ crushing resistance of bonded and unbonded
levelling screeds
Annex E (normative) - Determination of in situ crushing
resistance of floating levelling screeds
Annex F (normative) - Curing recommendations for different
cement types
Bibliography
Provides recommendations for constituent materials, design, work on site, inspection and testing of concrete bases that are to receive in situ wearing screeds.
Committee |
B/507/6
|
DevelopmentNote |
Supersedes BS 8204-1(2002) (12/2003) Supersedes 03/312993 DC (01/2004) 2003 Edition Re-Issued in September 2009 & incorporates AMD 1 2009. Supersedes 09/30193134 DC. (10/2009)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
BS 8204-5(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 5: MASTIC ASPHALT UNDERLAYS AND WEARING SURFACES - CODE OF PRACTICE |
BS 5385-3:2014 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
BS 5385-3:2007 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
BS 5385-4:2009 | Wall and floor tiling Design and installation of ceramic and mosaic tiling in special conditions. Code of practice |
BS 8102:2009 | Code of practice for protection of below ground structures against water from the ground |
BS 8204-3(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE |
BS 8204-4(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 4: CEMENTITIOUS TERRAZZO WEARING SURFACES - CODE OF PRACTICE |
BS 8203:2017 | Code of practice for installation of resilient floor coverings |
BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
BS 5385-4:2015 | Wall and floor tiling Design and installation of ceramic and mosaic tiling in specific conditions. Code of practice |
BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
BS 8204-6(2008) : 2008 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 6: SYNTHETIC RESIN FLOORINGS - CODE OF PRACTICE |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS CP102(1973) : 1973 | CODE OF PRACTICE FOR PROTECTION OF BUILDINGS AGAINST WATER FROM THE GROUND |
BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
BS EN 13139:2013 | Aggregates for mortar |
BS 4483:2005 | Steel fabric for the reinforcement of concrete. Specification |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria |
BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
BS 6700(2006) : 2006 | DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION |
BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
BS 1370:1979 | Specification for low heat Portland cement |
BS 12-2:1971 | Portland cement ordinary and rapid hardening part 2 metric units |
BS EN 197-4:2004 | Cement Composition, specifications and conformity criteria for low early strength blastfurnace cements |
BS EN 450-1:2012 | Fly ash for concrete Definition, specifications and conformity criteria |
BS 8500-2(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
BS EN 14647:2005 | Calcium aluminate cement. Composition, specifications and conformity criteria |
BS 410-1:2000 | Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
BS EN 10223-2:2012 | Steel wire and wire products for fencing and netting Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
BS EN 12620:2013 | Aggregates for concrete |
BS 8201:1987 | Code of practice for flooring of timber, timber products and wood based panel products |
PD 6682-1:2003 | Aggregates Aggregates for concrete. Guidance on the use of BS EN 12620 |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS 410-2:2000 | Test sieves. Technical requirements and testing Test sieves of perforated metal plate |
BS 8102:1990 | Code of practice for protection of structures against water from the ground |
BS EN 934-2 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
BS 4551(2005) : 2005 | MORTAR - METHODS OF TEST FOR MORTAR AND SCREED - CHEMICAL ANALYSIS AND PHYSICAL TESTING |
BS ISO 6707-1:2014 | Buildings and civil engineering works. Vocabulary General terms |
BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
BS EN 13318:2000 | Screed material and floor screeds. Definitions |
BS 4027:1996 | Specification for sulfate-resisting Portland cement |
BS 8425:2003 | Code of practice for installation of laminate floor coverings |
BS 7979:2001 | Specification for limestone fines for use with Portland cement |
BS 6100-9:2007 | Building and civil engineering. Vocabulary Work with concrete and plaster |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.