BS EN 1011-2:2001
Current
The latest, up-to-date edition.
Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels
Hardcopy , PDF
English
17-02-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Parent metal
6 Weldability factors
7 Handling of welding consumables
8 Weld details
9 Welds in holes or slots
10 Preparation of joint face
11 Alignment of butt welds before welding
12 Preheating
13 Tack welds
14 Temporary attachments
15 Heat input
16 Welding procedure specification
17 Identification
18 Inspection and testing
19 Correction of non-conforming welds
20 Correction of distortion
21 Post weld heat treatment
Annex A (informative) Possible detrimental phenomena
resulting from welding of steels, not covered by
other annexes
Annex B (informative) Guidance on joint detail design
(when there is no application standard)
Annex C (informative) Avoidance of hydrogen cracking
(also known as cold cracking)
Annex D (informative) Heat affected zone toughness and
hardness
Annex E (informative) Avoidance of solidification
cracking
Annex F (informative) Avoidance of lamellar tearing
Annex G (informative) References in the annexes
Bibliography
Provides specification for manual, semi-mechanized, mechanized and automatic arc welding of ferritic steels, excluding ferritic stainless steels, in all product forms.
| Committee |
WEE/0
|
| DevelopmentNote |
Together with BS EN 1011-1, supersedes BS 5135(1984) (04/2001) Supersedes 93/702956 DC (09/2002)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard gives guidance for manual, semi-mechanized, mechanized and automatic arc welding of ferritic steels (see clause 5), excluding ferritic stainless steels, in all product forms.
| Standards | Relationship |
| EN 1011-2:2001 | Identical |
| NF EN 1011-2 : 2002 AMD 1 2004 | Identical |
| SN EN 1011-2 : 2001 AMD 1 2004 | Identical |
| I.S. EN 1011-2:2001 | Identical |
| NEN EN 1011-2 : 2001 AMD 1 2004 | Identical |
| NBN EN 1011-2 : 2001 AMD 1 2004 | Identical |
| UNI EN 1011-2 : 2005 | Identical |
| UNE-EN 1011-2:2001 | Identical |
| NS EN 1011-2 : 2001 AMD 1 2004 | Identical |
| 16/30337162 DC : 0 | BS 8548 - GUIDANCE FOR ARC WELDING OF REINFORCING STEEL |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| 16/30338305 DC : 0 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS - SPECIFICATION |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| 04/30085945 DC : DRAFT NOV 2004 | BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION |
| DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
| BS 8548:2017 | Guidance for arc welding of reinforcing steel |
| 17/30349707 DC : DRAFT AUG 2017 | BS 5975:2018 - CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 7668:2004 | Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 7668:2016 | Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS 1722-12:2006 | Fences Specification for steel palisade fences |
| DEFSTAN 81-086/5(2022):2022 | Metal Fittings for Wooden Containers |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| 07/30160560 DC : DRAFT JAN 2007 | PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| DEFSTAN 81-86/3(2007) : 2007 | METAL FITTINGS FOR WOODEN CONTAINERS |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| 05/30113263 DC : DRAFT FEB 2005 | BS 7775 - SPECIFICATION FOR PENSTOCKS |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 02/703583 DC : DRAFT FEB 2002 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS |
| BS 7775:2005 | Penstocks for use in water and other liquid flow applications. Specification |
| BS 4515-1:2004 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 7608(2014) : 2014 | GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| BS 4515-1:2009 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
| BS 8110-1:1997 | Structural use of concrete Code of practice for design and construction |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| DEFSTAN 03-34/4(2008) : 2008 | ARC WELDING OF FERROUS ARMOUR |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| 04/30121774 DC : DRAFT SEP 2004 | BS 7123-1 - METAL ARC WELDING OF STEEL FOR CONCRETE REINFORCEMENT - PART 1: LOAD BEARING WELDED JOINTS |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| 04/30121786 DC : DRAFT SEP 2004 | BS 7123-2 - METAL ARC WELDING OF STEEL FOR CONCRETE REINFORCEMENT - PART 2: NON-LOAD BEARING WELDED JOINTS |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| BS PD6705-2(2010) : 2010 | STRUCTURAL USE OF STEEL AND ALUMINIUM - PART 2: RECOMMENDATIONS FOR THE EXECUTION OF STEEL BRIDGES TO BS EN 1090-2 |
| BS 8220-3:2004 | Guide for security of buildings against crime Storage, industrial and distribution premises |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| 13/30102062 DC : 0 | BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| DEFSTAN 02-875/1(2010) : 2010 | WELD OVERLAY CLADDING AND HARDFACING FOR NAVAL APPLICATIONS |
| 07/30150912 DC : 0 | BS 5975 - CODE OF PRACTICE FOR THE PROCEDURAL CONTROL OF TEMPORARY WORKS AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS 7363:1990 | Method for bead-on-plate (BOP) test for welds |
| DEFSTAN 03-34/5(2009) : 2009 | ARC WELDING OF FERROUS ARMOUR |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| 16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
| BS 5400-3:2000 | Steel, concrete and composite bridges Code of practice for design of steel bridges |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| ISO 9692:1992 | Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding Joint preparations for steel |
| EN 29692 : 1994 | METAL-ARC WELDING WITH COVERED ELECTRODE, GAS-SHIELDED METAL-ARC WELDING AND GAS WELDING - JOINT PREPARATIONS FOR STEEL |
| EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 499 : 1994 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| EN 288-8 : 1995 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 8: APPROVAL BY A PRE-PRODUCTION WELDING TEST |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| EN 1708-2:2000 | Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.