BS EN 10270-3:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel wire for mechanical springs Stainless spring steel wire
Hardcopy , PDF
14-09-2020
English
30-11-2011
Foreword
1 Scope
2 Normative references
3 Information to be supplied by the purchaser
4 Requirements
5 Testing and inspection
6 Marking and packaging
Annex A (informative) - Additional information
Annex B (informative) - Cross reference of steel grade
designations
Bibliography
Pertains to the grades of stainless steels listed in Table 1, which are usually used in the cold drawn condition in the form of wire of circular cross-section up to 10,00 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes to slightly increased temperatures.
Committee |
ISE/106
|
DevelopmentNote |
Supersedes BS 2056(1991) (05/2001) Supersedes 96/707718 DC. (07/2005) Supersedes 08/30180856 DC. (11/2011)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This European Standard applies to the grades of stainless steels listed in Table 1, which are usually used in the cold drawn condition in the form of wire of circular cross-section up to 10,00 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes to slightly increased temperatures (see A.1).
1.2 In addition to the steels listed in Table 1 certain of the steel grades covered by EN 10088-3 e.g. 1.4571, 1.4539, 1.4028 are also used for springs, although to much lesser extent. In these cases the mechanical properties (tensile strength, etc.) should be agreed between purchaser and supplier. Similarly, diameters between 10,00 mm and 15,00 mm may be ordered according to this standard; in this case the parties should agree upon the required mechanical characteristics.
1.3 In addition to this European Standard the general technical delivery requirements of EN 10021 are applicable.
Standards | Relationship |
UNE-EN 10270-3:2012 | Identical |
NBN EN 10270-3 : 2011 | Identical |
EN 10270-3:2011 | Identical |
I.S. EN 10270-3:2011 | Identical |
UNI EN 10270-3 : 2011 | Identical |
NF EN 10270-3 : 2012 | Identical |
NS EN 10270-3 : 2011 | Identical |
DIN EN 10270-3:2012-01 | Identical |
NEN EN 10270-3 : 2011 | Identical |
SN EN 10270-3 : 2012 | Identical |
DEFSTAN 07-207/2(2009) : 2009 | REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE) |
BS 2S 205:2004 | Austenitic chromium-nickel steel wire rod, wire and springs. Specification |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 10021:2006 | General technical delivery conditions for steel products |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.