UNE-EN 10088-5:2010
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
UNE-EN 10343:2010
|
Steels for quenching and tempering for construction purposes - Technical delivery conditions |
I.S. EN 10208-2:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
DIN EN 10338:2015-10
|
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
PREN 10217-6 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
09/30207517 DC : 0
|
BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
PREN 10207 : DRAFT 2015
|
STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
09/30207505 DC : 0
|
BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
11/30239473 DC : 0
|
BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
09/30207508 DC : 0
|
BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
BS EN 10343:2009
|
Steels for quenching and tempering for construction purposes. Technical delivery conditions |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
PREN 10120 : DRAFT 2014
|
STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
PREN 10028-1 : DRAFT 2014
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 10216-2:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
BS EN 10216-2:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 13261:2011-01
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
DIN EN 10208-1:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
BS EN 14700:2014
|
Welding consumables. Welding consumables for hard-facing |
UNE-EN 10272:2016
|
Stainless steel bars for pressure purposes |
BS EN 10205:2016
|
Cold reduced tinmill products. Blackplate |
BS EN 10272:2007
|
Stainless steel bars for pressure purposes |
BS EN 13261 : 2009
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
I.S. EN 14700:2014
|
WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
I.S. EN 10222-1:2017
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
I.S. EN 10216-4:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
I.S. EN 10120:2017
|
STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
I.S. EN 10218-1:2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10270-1:2011+A1:2017
|
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 10218-1:2012-03
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10270-2:2011
|
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
EN 10120:2017
|
Steel sheet and strip for welded gas cylinders |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
DIN EN 10205:2017-03
|
COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
EN 10205:2016
|
Cold reduced tinmill products - Blackplate |
EN 10207:2017
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
EN 13479:2017
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements |
DIN EN 10088-4:2010-01
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
12/30270633 DC : 0
|
BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
BS EN 10088-5:2009
|
Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
DIN EN 10294-2 E : 2012
|
HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
11/30253751 DC : 0
|
BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
UNI EN 10217-7 : 2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
PREN 13674-1 : DRAFT 2009
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
PREN 10088-2 : DRAFT 2011
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
09/30207501 DC : 0
|
BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
BS EN 10338:2015
|
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
PREN 10217-4 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
PREN 10272 : DRAFT 2013
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
PREN 10217-3 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
UNE-EN 10088-4:2010
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
DIN EN 10216-5:2014-03
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
UNE-EN 10120:2018
|
Steel sheet and strip for welded gas cylinders |
DIN EN 14700:2014-07
|
Welding consumables - Welding consumables for hard-facing |
UNE-EN 13479:2018
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
DIN EN 10269:2014-02
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
DIN EN 10216-2:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 10216-4:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
BS EN 10270-1 : 2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
ONORM EN 10216-2 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DIN EN 10270-2:2012-01
|
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
DIN EN 1559-2:2014-12
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 10216-1:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
I.S. EN 10273:2016
|
HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
I.S. EN 10216-3:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN 10208-2:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
DIN EN 13674-1:2011-04
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 10028-1:2017-10
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
DIN EN 13674-1:2017-07
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 10270-1:2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
I.S. EN 10216-5:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
I.S. EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN 17115:2012-07
|
STEELS FOR WELDED ROUND LINK CHAINS AND CHAIN COMPONENTS - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10217-7:2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
I.S. EN 10205:2016
|
COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
DIN EN 10208-1:1998-02
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 10088-2:2014-12
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 10270-2:2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
I.S. EN 10270-3:2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
I.S. EN 10269:2013
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
I.S. EN 13479:2017
|
WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
I.S. EN 1559-2:2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 10272:2016&LC:2016
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN 10088-3:2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 10088-3:2014-12
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
I.S. EN 13674-1:2011
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 10028-1:2017
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
BS EN 10294-2:2012
|
Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
DIN EN 10205:1992-01
|
COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
UNE-EN 10338:2016
|
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
09/30207511 DC : 0
|
BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
17/30347067 DC : 0
|
BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
UNI EN 10088-5 : 2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
13/30288572 DC : 0
|
BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
14/30312176 DC : 0
|
BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
UNI EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
15/30331537 DC : 0
|
BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
ONORM EN 10217-7 : 2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
13/30288575 DC : 0
|
BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
09/30207514 DC : 0
|
BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
ONORM EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
09/30207521 DC : 0
|
BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
09/30185992 DC : 0
|
BS EN 13674-1 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
PREN 10222-1 : DRAFT 2012
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
DIN 1623:2009-05
|
Cold rolled strip and sheet - Technical delivery conditions - General structural steels |
PREN 10210-2 : DRAFT 2016
|
HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10294-2:2012
|
HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
UNE-EN 10205:2017
|
Cold reduced tinmill products - Blackplate |
PREN 10217-7 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
I.S. EN 10088-5:2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN 10270-1:2011+A1:2017
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
UNE-EN 10088-2:2015
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
DIN EN 10216-3:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
UNE-EN 10208-1:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
UNI EN 10216-2 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
UNE-EN 10216-2:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 13674-1 : 2011
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
BS EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
BS EN 10217-7:2014
|
Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
BS EN 10120:2017
|
Steel sheet and strip for welded gas cylinders |
UNE-EN 10088-3:2015
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 10216-4:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
UNI EN 13261 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
EN 13261:2009+A1:2010
|
Railway applications - Wheelsets and bogies - Axles - Product requirements |
UNI EN 10088-3 : 2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10208-2 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
UNI EN 10269 : 2013
|
Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN 1559-2 : 2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN 10218-1 : 2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
UNI EN 10208-1 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN 14700 : 2014
|
WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
UNI EN 10216-4 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
UNI EN 10216-1 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10270-2 : 2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
UNI EN 10216-3 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN 10343:2009-07
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
PREN 10205 : DRAFT 2014
|
COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
16/30332608 DC : DRAFT JAN 2016
|
BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
UNI EN 10343 : 2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
14/30301272 DC : 0
|
BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 10088-5:2009-07
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNI EN 10294-2 : 2012
|
HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
BS EN 10088-4:2009
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
I.S. EN 10338:2015
|
HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10088-4:2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN 10207:2017
|
STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
PREN 10269 : DRAFT 2011
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
PREN 10273 : DRAFT 2013
|
HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 10207:2017
|
Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
DIN EN 10270-3:2012-01
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
I.S. EN 10263-1:2017
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 10216-4:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
UNE-EN 10208-2:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
DIN EN 10217-7:2015-01
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
DIN EN 10272:2016-10
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
BS EN 1559-2:2014
|
Founding. Technical conditions of delivery Additional requirements for steel castings |
UNE-EN 10270-2:2012
|
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
BS EN 10216-5:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
BS EN 13479:2017
|
Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials |
BS EN 10216-3:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
BS EN 10270-3:2011
|
Steel wire for mechanical springs Stainless spring steel wire |
BS EN 10218-1:2012
|
Steel wire and wire products. General Test methods |
UNE-EN 14700:2014
|
Welding consumables - Welding consumables for hard-facing |
BS EN 10088-3:2014
|
Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 10269:2014
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10270-2:2011
|
Steel wire for mechanical springs Oil hardened and tempered spring steel wire |
DIN EN 10270-1:2017-09
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
UNE-EN 10216-3:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
UNE-EN 10216-5:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
UNE-EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
UNE-EN 10216-1:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
UNE-EN 10270-3:2012
|
Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
UNE-EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements |
EN 13674-1:2011+A1:2017
|
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
EN 14700:2014
|
Welding consumables - Welding consumables for hard-facing |
UNE-EN 10294-2:2012
|
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
I.S. EN 10208-1:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
PREN 10263-1 : DRAFT 2014
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
BS EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
14/30312182 DC : 0
|
BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
PREN 10217-2 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
11/30254171 DC : 0
|
BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
09/30185794 DC : 0
|
BS EN 10294-2 - HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS AND NICKEL ALLOYS WITH SPECIFIED MACHINABILITY PROPERTIES |
14/30294825 DC : 0
|
BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
PREN 10217-5 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
PREN 10219-2 : DRAFT 2016
|
COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
UNI EN 10270-3 : 2011
|
STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
PREN 10025-1 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 10343:2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
17/30353548 DC : 0
|
BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
16/30332614 DC : 0
|
BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
UNI EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
DIN EN 10216-1:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
BS EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
BS EN 10216-1:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
UNE-EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
UNE-EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
BS EN 10222-1:2017
|
Steel forgings for pressure purposes General requirements for open die forgings |
BS EN 10028-1:2017
|
Flat products made of steels for pressure purposes General requirements |
BS EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 10270-3:2011
|
Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
EN 10294-2:2012
|
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 10343:2009
|
Steels for quenching and tempering for construction purposes - Technical delivery conditions |
EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
EN 10338:2015
|
Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
DIN EN 10294-2:2012-04
|
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
UNE-EN 10270-1:2012
|
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |