BS EN 12365-4:2003
Current
The latest, up-to-date edition.
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Recovery after accelerated ageing test method
Hardcopy , PDF
English
04-10-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Maximum working temperature range
4.2 Recovery after accelerated ageing
5 Test apparatus
5.1 Compression block
5.2 Heating chamber
6 Test procedure
6.1 Test measurements
6.2 Test samples
6.2.1 General
6.2.2 Shape and size of test sample
6.2.3 Conditioning
6.3 Preparation of test pieces
7 Test method
7.1 General
7.2 Temperature and humidity
7.3 Determination of free height
7.4 Deflection recovery test
7.5 Re-measure free height
7.6 Expression of results
7.7 Determination of final result
8 Test report
Annex A (informative) Typical compression block for deflection
recovery test
Annex B (informative) Flow chart of test procedure
Bibliography
Describes the method to be used to select, prepare, condition and test samples of typical raw materials, to determine the long term performance of gaskets and weatherstripping under the conditions laid down in the test after ageing at the maximum working temperature.
| Committee |
B/538/4
|
| DevelopmentNote |
Supersedes 96/103097 DC (10/2003)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part 4 of prEN 33/WI131/247 specifies the method to be used to select, condition and test standard extruded samples of typical raw materials, to determine the percentage of long term recovery after being deflected through its working deflection range under the conditions layed down in the test. The test has been devised to cover all likely raw materials.
| Standards | Relationship |
| DIN EN 12365-4:2003-12 | Identical |
| EN 12365-4:2003 | Identical |
| NS EN 12365-4 : 1ED 2003 | Identical |
| NF EN 12365-4 : 2003 | Identical |
| SN EN 12365-4 : 2003 | Identical |
| NEN EN 12365-4 : 2003 | Identical |
| UNE-EN 12365-4:2004 | Identical |
| I.S. EN 12365-4:2003 | Identical |
| NBN EN 12365-4 : 2003 | Identical |
| UNI EN 12365-4 : 2005 | Identical |
| BS DD8455(2007) : 2007 | MATERIALS FOR GASKETS AND WEATHERSTRIPPING FOR WINDOWS, DOORS, CONSERVATORIES AND CURTAIN WALLING - REQUIREMENTS AND TEST METHODS |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| ISO 6916-2:2001 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
| ISO 4665:2016 | Rubber, vulcanized or thermoplastic — Resistance to weathering |
| EN 12365-2:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 12365-1:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
| ISO 2285:2013 | Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
| ISO 15113:2005 | Rubber — Determination of frictional properties |
| EN 12365-3:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 4661-1:1993 | Rubber, vulcanized or thermoplastic Preparation of samples and test pieces Part 1: Physical tests |
| ISO 4611:2010 | Plastics Determination of the effects of exposure to damp heat, water spray and salt mist |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| PREN 12519 : DRAFT 1996 | DOORS AND WINDOWS - TERMINOLOGY |
| ISO 471:1995 | Rubber Temperatures, humidities and times for conditioning and testing |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
| ISO 5892:2013 | Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.