EN 12365-4:2003

Current

Current The latest, up-to-date edition.

Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method

Available format(s):

Language(s):

Published date: 17-09-2003

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 Maximum working temperature range
  4.2 Recovery after accelerated ageing
5 Test apparatus
  5.1 Compression block
  5.2 Heating chamber
6 Test procedure
  6.1 Test measurements
  6.2 Test samples
      6.2.1 General
      6.2.2 Shape and size of test sample
      6.2.3 Conditioning
  6.3 Preparation of test pieces
7 Test method
  7.1 General
  7.2 Temperature and humidity
  7.3 Determination of free height
  7.4 Deflection recovery test
  7.5 Re-measure free height
  7.6 Expression of results
  7.7 Determination of final result
8 Test report
Annex A (informative) Typical compression block for deflection
        recovery test
Annex B (informative) Flow chart of test procedure
Bibliography

Abstract - (Show below) - (Hide below)

This part 4 of prEN 33/WI131/247 specifies the method to be used to select, condition and test standard extruded samples of typical raw materials, to determine the percentage of long term recovery after being deflected through its working deflection range under the conditions layed down in the test. The test has been devised to cover all likely raw materials.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 33
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
PN EN 12365-4 : 2006	Identical
DIN EN 12365-4:2003-12	Identical
NS EN 12365-4 : 1ED 2003	Identical
NF EN 12365-4 : 2003	Identical
SN EN 12365-4 : 2003	Identical
NEN EN 12365-4 : 2003	Identical
BS EN 12365-4:2003	Identical
UNE-EN 12365-4:2004	Identical
I.S. EN 12365-4:2003	Identical
NBN EN 12365-4 : 2003	Identical
UNI EN 12365-4 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 12365-1:2003	Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Performance requirements and classification
DIN EN 13830:2015-07	CURTAIN WALLING - PRODUCT STANDARD
EN 12365-3:2003	Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method
PREN 13830 : DRAFT 2013	CURTAIN WALLING - PRODUCT STANDARD
PREN 14351-2 : DRAFT 2014	WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
13/30281348 DC : 0	BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 13830:2015	CURTAIN WALLING - PRODUCT STANDARD
UNE-EN 13830:2016	Curtain walling - Product standard
EN 13830:2015	Curtain walling - Product standard
BS EN 13830:2015	Curtain walling. Product standard
14/30297827 DC : 0	BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
BS EN 12365-3:2003	Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Deflection recovery test method
EN 12365-1:2003	Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification

Standards Referencing This Book - (Show below) - (Hide below)

ISO 75-1:2013	Plastics Determination of temperature of deflection under load Part 1: General test method
ISO 6916-2:2001	Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
ISO 4665:2016	Rubber, vulcanized or thermoplastic — Resistance to weathering
EN 12365-2:2003	Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods
ISO 188:2011	Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
EN 12365-1:2003	Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
ISO 2285:2013	Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 15113:2005	Rubber — Determination of frictional properties
EN 12365-3:2003	Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method
ISO 7619:1997	Rubber Determination of indentation hardness by means of pocket hardness meters
ISO 4661-1:1993	Rubber, vulcanized or thermoplastic Preparation of samples and test pieces Part 1: Physical tests
ISO 4611:2010	Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 291:2008	Plastics Standard atmospheres for conditioning and testing
PREN 12519 : DRAFT 1996	DOORS AND WINDOWS - TERMINOLOGY
ISO 471:1995	Rubber Temperatures, humidities and times for conditioning and testing
ISO/TR 9272:2005	Rubber and rubber products Determination of precision for test method standards
ISO 5892:2013	Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart