BS EN 12488:2016
Current
The latest, up-to-date edition.
Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing
31-07-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic requirements
5 Requirements for the components
Annex A (informative) - Recommendations for drainage
and ventilation
Annex B (informative) - Aspects for determining the
rebate dimensions
Annex C (informative) - Positioning of glazing blocks as
a function of frame type
Annex D (informative) - Additional considerations for
sloped glazing
Bibliography
Describes principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material.
Committee |
B/520
|
DocumentType |
Standard
|
PublisherName |
British Standards Institution
|
Status |
Current
|
This European Standard defines principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material. This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings. This European standard specifies also the functions, requirements and installation of glazing blocks within a frame during its manufacturing, transportation, installation and operational life. The standard applies to glazing blocks used for all types of flat or curved glass, as well as to derived processed types of glass. For certain glass products, e.g. fire resistant glazing, security glass, other or additional requirements, rules or recommendations may apply. The standard is applicable to European climate conditions. This European Standard does not apply to the following: glass blocks and glass pavers ( EN1051‑1 ); channel-shaped glass ( EN572‑7 ); structural sealant glazing (see EN13022‑1 and EN13022‑2 and ETAG002 ); adhesively bonded glazing in window; point fixed glazing; greenhouses (see EN13031‑1 ). As this standard gives basic assembly principles only, national requirements, rules or recommendations may also apply.
Standards | Relationship |
EN 12488:2016 | Identical |
EN 13022-1:2014 | Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
EN 13031-1:2001 | Greenhouses - Design and construction - Part 1: Commercial production greenhouses |
EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
EN 1748-2 : 1997 | GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS |
EN 12365-1:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
PREN 16612 : DRAFT 2017 | GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
EN 12519:2004 | Windows and pedestrian doors - Terminology |
EN 13241-1:2003+A1:2011 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
EN 1748-1 : 1997 | GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE GLASSES |
EN 13830:2015 | Curtain walling - Product standard |
EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
PREN 14351-2 : DRAFT 2014 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
EN 13022-2:2014 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
EN 1036 : 1999 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.