BS EN 12566-3 : 2005
Current
Current
The latest, up-to-date edition.
SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2005
Publisher
€295.21
Excluding VAT
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated
terms
4 Product characteristics
5 Testing, assessment and sampling methods
6 Assessment and verification of constancy of
performance - AVCP
7 Classification and designation (Nominal
designation)
8 Marking, labelling and packaging
Annex A (normative) - Watertightness test
Annex B (normative) - Treatment efficiency test
procedure
Annex C (normative) - Test methods for structural
behaviour
Annex D (normative) - Mechanical characteristics
used for structural behaviour calculation
Annex E (informative) - Analysis method
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
Defines requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants.
| Committee |
B/505
|
| DevelopmentNote |
Supersedes 01/107111 DC. (03/2006) Supersedes BS 7781(1994). (05/2007) Supersedes 16/30329416 DC. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 12566-3 : 2016 | Identical |
| I.S. EN 12566-3:2016 | Identical |
| NF EN 12566-3 : 2016 | Identical |
| NS EN 12566-3 : 2016 | Identical |
| EN 12566-3:2016 | Identical |
| DIN EN 12566-3:2016-12 | Identical |
| NEN EN 12566-3 : 2016 | Identical |
| I.S. EN 12566-3:2005 | Equivalent |
| EN 12566-3:2005 | Equivalent |
| UNE-EN 12566-3:2017 | Identical |
| 07/30138205 DC : DRAFT MAR 2007 | BS 6297 - DESIGN AND INSTALLATION OF SMALL SEWAGE TREATMENT WORKS AND CESSPOOLS - CODE OF PRACTICE |
| BS 6297(2007) : 2007 | CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF DRAINAGE FIELDS FOR USE IN WASTEWATER TREATMENT |
| ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
| EN ISO 13229:2011 | Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010) |
| EN 14150:2006 | Geosynthetic barriers - Determination of permeability to liquids |
| ISO 6778:1984 | Water quality — Determination of ammonium — Potentiometric method |
| ISO 13229:2010 | Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value |
| ISO 5663:1984 | Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN ISO 9967:2016 | Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
| EN 978:1997 | Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
| ISO 5815:1989 | Water quality — Determination of biochemical oxygen demand after 5 days (BOD 5) — Dilution and seeding method |
| EN 1899-1:1998 | Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified) |
| ISO 1133-1:2011 | Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method |
| EN 872:2005 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| EN 976-1:1997 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 25663:1993 | Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium (ISO 5663:1984) |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| EN ISO 1133-2:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| EN ISO 11905-1:1998 | Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997) |
| EN 12311-2:2013 | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| ISO 11905-1:1997 | Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
| ISO 11885:2007 | Water quality — Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| EN 12260:2003 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
| ISO 15681-2:2003 | Water quality — Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) — Part 2: Method by continuous flow analysis (CFA) |
| ISO 10304-1:2007 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| EN ISO 15681-2:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003) |
| ISO 2555:1989 | Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 899-2:2003 | Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| ISO 15705:2002 | Water quality — Determination of the chemical oxygen demand index (ST-COD) — Small-scale sealed-tube method |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| EN ISO 6878:2004 | Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 580:2003 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| ISO 9967:2016 | Thermoplastics pipes — Determination of creep ratio |
| ISO 6878:2004 | Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method |
| EN 1905:1998 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| ISO 1133-2:2011 | Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture |
| EN ISO 2505:2005 | Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005) |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| ISO 9969:2016 | Thermoplastics pipes — Determination of ring stiffness |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
| ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 2505:2005 | Thermoplastics pipes — Longitudinal reversion — Test method and parameters |
| EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.