EN 1264-4:2009
|
Water based surface embedded heating and cooling systems - Part 4: Installation |
EN 442-3:2003
|
Radiators and convectors - Part 3: Evaluation of conformity |
BS EN 12170:2002
|
Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator |
BS EN ISO 21003-2 : 2008
|
MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
EN 1264-3:2009
|
Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
IEC 60730-2-9:2015 RLV
|
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
EN 1503-4:2016
|
Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
EN 215 : 2004 AMD 1 2006
|
THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
EN 442-1:2014
|
Radiators and convectors - Part 1: Technical specifications and requirements |
ISO 4126-1:2013
|
Safety devices for protection against excessive pressure — Part 1: Safety valves |
EN 12953-6:2011
|
Shell Boilers - Part 6: Requirements for equipment for the boiler |
BS EN 12171:2002
|
Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator |
EN 1264-5:2008
|
Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
EN 1503-3:2000/AC:2001
|
VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS |
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN 60730-2-9:2010
|
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN 1503-2:2000
|
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
BS 6880-2:1988
|
Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
BS EN 14336:2004
|
Heating systems in buildings. Installation and commissioning of water based heating systems |
BS EN 60335-2-73 : 2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
ISO 15927-5:2004
|
Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
BS 7074-1:1989
|
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems Code of practice for domestic heating and hot water supply |
BS 6880-1:1988
|
Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations |
EN 1503-1:2000
|
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
ISO 7726:1998
|
Ergonomics of the thermal environment Instruments for measuring physical quantities |
EN 15316-1:2017
|
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
BS 1566-1(2002) : 2002
|
COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
VDI 2035 Blatt 2:2009-08
|
Prevention of damage in water heating installations - Water-side corrosion |
EN ISO 7726:2001
|
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
BS 3198:1981
|
Specification for copper hot water storage combination units for domestic purposes |
EN ISO 15927-5:2004/A1:2011
|
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011) |
EN ISO 8044:2015
|
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
EN ISO 7730:2005
|
Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
ISO 8044:2015
|
Corrosion of metals and alloys Basic terms and definitions |
ISO 12241:2008
|
Thermal insulation for building equipment and industrial installations Calculation rules |
EN 12170:2002
|
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
EN 806-2:2005
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
EN ISO 12241:2008
|
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
ISO 7730:2005
|
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
BS 7206:1990
|
Specification for unvented hot water storage units and packages |
EN 1264-2:2008+A1:2012
|
Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
EN 442-2:2014
|
Radiators and convectors - Part 2: Test methods and rating |
EN 1264-1:2011
|
Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
BS EN 12831:2003
|
Heating systems in buildings. Method for calculation of the design heat load |
EN 12171:2002
|
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
EN 14336:2004
|
Heating systems in buildings - Installation and commissioning of water based heating systems |
EN 12831 : 2003
|
HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
BS 8558:2011
|
Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
EN ISO 4126-1:2013/A1:2016
|
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013/AMD 1:2016) |
BS 6880-3:1988
|
Code of practice for low temperature hot water heating systems of output greater than 45 kW Installation, commissioning and maintenance |
EN 15500:2008
|
Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
EN 12098-1:2017
|
Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |