BS EN 13101:2002
Current
The latest, up-to-date edition.
Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
Hardcopy , PDF
English
14-11-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Materials
4.2.1 Metals
4.2.2 Plastics encapsulation
4.3 Design requirements
4.3.1 Types
4.3.2 Dimensions
4.3.3 Limit of insertion of step
4.3.4 Surface condition
4.3.5 Corrosion resistance
4.3.6 Twist
4.3.7 Vertical loading
4.3.8 Proof load - Non-ductile materials (Grey cast
iron)
4.3.9 Resistance to pull-out
4.3.10 Resistance to impact
4.3.11 Integrity of plastics encapsulation
4.3.12 Thickness of plastics encapsulation
4.3.13 Integrity of galvanizing
5 Testing
6 Marking and designation
6.1 Marking
6.2 Designation
7 Evaluation of conformity
7.1 General
7.2 Type testing (initial testing of the product)
7.3 Factory production control (FPC)
7.3.1 General
7.3.2 Equipment
7.3.3 Raw materials and components
7.3.4 Product testing and evaluation
7.3.5 Non conforming products
Annex A (normative) Twist test
A.1 Apparatus
A.2 Procedure
A.3 Test report
Annex B (normative) Vertical loading test
B.1 Apparatus
B.2 Procedure
B.3 Test report
Annex C (normative) Proof load test for grey cast iron
steps
C.1 Apparatus
C.2 Procedure
C.3 Test report
Annex D (normative) Pull out/anchorage test
D.1 Apparatus
D.2 Preparation
D.2.1 Method 1 - For steps designed to be factory
fixed into pre-cast concrete
D.2.2 Method 2 - For steps designed to be fixed
into masonry or concrete during construction
D.2.3 Method 3 - For steps designed to be fixed
after construction
D.2.4 Method 4 - For steps designed to be replaced
D.3 Procedure
D.4 Test report
Annex E (normative) Impact test
E.1 Apparatus
E.2 Procedure
E.3 Test report
Annex F (normative) Method of test for integrity of plastics
encapsulation
F.1 Apparatus
F.2 Procedure
F.3 Test report
Annex G (normative) Method of test for integrity of plastics
encapsulation (dry conditions)
G.1 Apparatus
G.1.1 Pore detector
G.2 Procedure
G.3 Test report
Annex H (normative) Method of test for thickness of plastics
encapsulation
H.1 Apparatus
H.2 Procedure
H.3 Test report
Annex I (informative) Evaluation of conformity by third party
I.1 General
I.2 Procedure of the third party control
I.3 Report by the third party
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
Gives general requirements and testing methods for steps manufactured from cast iron, steel or aluminium, for use in manholes and other underground man entry chambers as a means of access.
Committee |
B/505
|
DevelopmentNote |
Supersedes 98/100923 DC (12/2002) Supersedes BS 1247-1(1990), BS 1247-2(1990) & BS 1247-3(1991) (05/2004)
|
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN 13101:2003-04 | Identical |
NS EN 13101 : 1ED 2002 | Identical |
SN EN 13101 : 2002 | Identical |
UNI EN 13101 : 2004 | Identical |
NBN EN 13101 : 2003 | Identical |
UNE-EN 13101:2003 | Identical |
I.S. EN 13101:2002 | Identical |
NF EN 13101 : 2003 | Identical |
EN 13101:2002 | Identical |
NEN EN 13101 : 2002 | Identical |
BS 5502-50(1993) : 1993 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 50: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND USE OF STORAGE TANKS AND RECEPTION PITS FOR LIVESTOCK SLURRY |
09/30209209 DC : 0 | BS 5911-3 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002) |
BS 5911-3(2010) : 2010 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002) |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 2284:1991 | Aerospace series - Sulphuric acid anodizing of aluminium and wrought aluminium alloys |
EN 1562:2012 | Founding - Malleable cast irons |
EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ENV 10080 : 1995 | STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE RIBBED REINFORCING STEEL B500 - TECHNICAL DELIVERY CONDITIONS FOR BARS, COILS AND WELDED FABRIC |
ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
EN 2101:1991 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
ISO 9001:2015 | Quality management systems — Requirements |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN 1561:2011 | Founding - Grey cast irons |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 3893:1977 | Concrete — Classification by compressive strength |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.