BS EN 13164 : 2012
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
Hardcopy , PDF
English
01-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units, abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values
of thermal resistance and thermal conductivity
Annex B (normative) - Product type determination (PTD) and
Factory production control (FPC)
Annex C (normative) - Determination of the aged values of
thermal resistance and thermal conductivity
Annex D (normative) - XPS multi-layered insulation products
Annex E (informative) - Additional properties
Annex F (informative) - Plan for cutting test specimen
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Defines the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings.
| Committee |
B/540
|
| DevelopmentNote |
Supersedes 98/120945 DC. (09/2002) Supersedes BS 3837-2(1990). (12/2003) Supersedes 08/30169537 DC. (06/2009) Supersedes 10/30213965 DC. (02/2013) 2012 Edition Re-Issued in March 2015 & incorporates AMD 1 2015. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 13164 : 2012 + A1 2015 | Identical |
| NBN EN 13164 : 2013 + A1 2015 | Identical |
| EN 13164:2012+A1:2015 | Identical |
| NEN EN 13164 : 2012 + A1 2015 | Identical |
| NF EN 13164 : 2012 + A1 2015 | Identical |
| NS EN 13164 : 2001 | Identical |
| UNI EN 13164 : 2013 | Identical |
| I.S. EN 13164:2012 | Identical |
| DIN EN 13164:2015-04 | Identical |
| UNE-EN 13164:2013 | Identical |
| BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 6203:2003 | Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications |
| PD 476-3:2012 | Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\' |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| 11/30256741 DC : DRAFT DEC 2011 | PD 476-3 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 "CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS" |
| 12/30256741 DC : 0 | BS PD 476-33 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 - CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 4590:2016 | Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
| EN 14307:2015 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| EN 12088:2013 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 13793:2003 | Thermal insulating products for building applications - Determination of behaviour under cyclic loading |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN 12091:2013 | Thermal insulating products for building applications - Determination of freeze-thaw resistance |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 11561:1999 | Ageing of thermal insulation materials — Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods) |
| EN 14934:2007 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.