BS EN 13170 : 2012
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
Hardcopy , PDF
English
01-01-2012
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy
of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared values
of thermal resistance and thermal conductivity
Annex B (normative) - Product type determination (PTD) and
factory production control (FPC)
Annex C (normative) - Multi layered insulation products
(insulation cork board)
Annex D (normative) - Determination of the thermal conductivity
in relation to moisture content
Annex E (informative) - Examples for the determination of the
declared values of thermal resistance and thermal
conductivity for a product or a product group
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Defines the requirements for factory made products of expanded cork, which are used for the thermal insulation of buildings.
Committee |
B/540
|
DevelopmentNote |
Supersedes 98/705188 DC. (08/2001) Supersedes 08/30169556 DC. (06/2009) Supersedes 10/30213983 DC. (02/2013) 2012 Edition Re-Issued in March 2015 & incorporates AMD 1 2015. (03/2015)
|
DocumentType |
Standard
|
Pages |
54
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 13170:2013 | Identical |
UNI EN 13170 : 2013 | Identical |
NF EN 13170 : 2013 + A1 2015 | Identical |
SN EN 13170 : 2012 + A1 2015 | Identical |
I.S. EN 13170:2012 | Identical |
NS EN 13170 : 2012 + A1 2015 | Identical |
DIN EN 13170:2015-04 | Identical |
NEN EN 13170 : 2012 + A1 2015 | Identical |
EN 13170:2012+A1:2015 | Identical |
NBN EN 13170 : 2013 + A1 2015 | Identical |
BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
05/30121961 DC : DRAFT JUL 2005 | BS 4841-3 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 3: SPECIFICATION FOR LAMINATED INSULATION BOARDS (ROOFBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION FOR BUILT-UP ROOFS UNDER BITUMENISED ROOFING MEMBRANES |
BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
BS 4841-3:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
BS 4841-4:2006 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
05/30124175 DC : DRAFT JUL 2005 | BS 4841-4 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 4: SPECIFICATION FOR LAMINATED INSULATION BOARDS (FLOORBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION COVERED BY SINGLE-PLY NON-BITUMINISED ROOFING MEMBRANES |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
ISO 9229:2007 | Thermal insulation Vocabulary |
EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
EN 29052-1:1992 | Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings |
EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
EN 1605:2013 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions |
EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
EN 12431:2013 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
EN 29053:1993 | Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991) |
ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
EN 1603:2013 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
EN 12430:2013 | Thermal insulating products for building applications - Determination of behaviour under point load |
EN 12105:1998 | Resilient floor coverings - Determination of moisture content of agglomerated composition cork |
EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
ISO 9052-1:1989 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings |
EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.