BS EN 13706-3:2002
Current
The latest, up-to-date edition.
Reinforced plastics composites. Specifications for pultruded profiles Specific requirements
Hardcopy , PDF
English
11-11-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Specification
4.1 Obligatory specified properties
4.2 Other properties which may be reported
4.3 Specific performance properties
4.4 Other requirements
Bibliography
Gives the specification of pultruded profiles, and specifies grades where the short-form code, Exx, is related to the Effective Flexural Modulus of the profile measured by testing a length of the complete profile. Two grades: E23 and E17 are defined.
| Committee |
PRI/42
|
| DevelopmentNote |
Supersedes 99/123728 DC (11/2002)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
1.1 This Part 3 of EN 13706 specifies the specification of pultruded profiles. The specification defines those properties, which shall be specified and the level to be obtained for each grade of profile.
1.2 The specification specifies grades where the short-form code, Exx, is related to the Effective Flexural Modulus of the profile measured by testing a length of the complete profile.
Two grades; E23 and E17 are defined.
NOTE Other grades can be introduced at future revisions of the standard.
1.3 The properties, that shall be achieved for each class of profile are given in Table 1. Other properties that can be reported are listed in Table 2.
1.4 Test methods to be used to determine properties related to the suitability of the profile for specific applications are referenced in clause 4.
| Standards | Relationship |
| I.S. EN 13706-3:2002 | Identical |
| NEN EN 13706-3 : 2002 | Identical |
| NBN EN 13706-3 : 2002 | Identical |
| SN EN 13706-3 : 2002 | Identical |
| UNE-EN 13706-3:2003 | Identical |
| NF EN 13706-3 : 2003 | Identical |
| UNI EN 13706-3 : 2003 | Identical |
| NS EN 13706-3 : 1ED 2002 | Identical |
| EN 13706-3:2002 | Identical |
| DIN EN 13706-3:2003-02 | Identical |
| 16/30327082 DC : DRAFT MAR 2016 | BS 8620 - LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT NO GREATER THAN 2.5 M - SPECIFICATION |
| BS 8620:2016 | Low level work platform with one working platform with side protection for use by one person with a maximum working platform height no greater than 2.5 m. Specification |
| BS PAS 250(2012) : 2012 | LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT OF LESS THAN 2.5 M - SPECIFICATION |
| ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| EN ISO 527-4:1997 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) |
| ISO 15310:1999 | Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| EN ISO 14130:1997 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
| EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.