PREN ISO 7792-2 : DRAFT 2011
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 7792-2:2012
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
PD ISO/TS 20328:2016
|
Imaging materials. Lenticular lens sheet. Measurements and specifications of dimensions |
16/30334902 DC : 0
|
BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
12/30258334 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS ISO 20753 : 2008
|
PLASTICS - TEST SPECIMENS |
BS EN ISO 20028-2:2017
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
S.R. CEN ISO/TR 22007-5:2014
|
PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
11/30192003 DC : 0
|
BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNE-EN ISO 19069-2:2016
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
BS EN 4702-05:2017
|
Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
PD IEC/TR 62039:2007
|
Selection guide for polymeric materials for outdoor use under HV stress |
04/30115317 DC : 0
|
BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
ONORM EN ISO 11963 : 2013
|
PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
16/30338304 DC : 0
|
BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
UNI EN 16240 : 2014
|
LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 17855-2:2016
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
PREN 4702-05 : DRAFT 2016
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 05: RETAINING WASHER |
BS EN 16153 : 2013
|
LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
ISO 20557-2:2018
|
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
DIN EN ISO 20753 E : 2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ISO 28078-2:2009
|
Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
DIN EN ISO 20753:2014-07
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
IEC TR 62039:2007
|
Selection guide for polymeric materials for outdoor use under HV stress |
I.S. EN ISO 11963:2012
|
PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
DIN EN 13121-1:2003-10
|
GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
DIN EN ISO 15103-2:2007-09
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 3673-2 E : 2012
|
PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012) |
DIN EN 14598-3:2005-07
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
DIN EN 14598-2:2005-07
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
BS EN ISO 13628-2:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
BS EN 13706-3:2002
|
Reinforced plastics composites. Specifications for pultruded profiles Specific requirements |
16/30330036 DC : 0
|
BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS |
ISO 15103-2:2007
|
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 3167:2014
|
Plastics. Multipurpose test specimens |
DIN EN ISO 1872-2:2000-12
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 7823-1:2003
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
I.S. EN ISO 11403-2:2012
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012) |
DIN EN 13706-3:2003-02
|
REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 3: SPECIFIC REQUIREMENTS |
DIN EN 13706-2:2003-02
|
REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
EN 1013:2012+A1:2014
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 3672-2:2002-07
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
17/30352672 DC : 0
|
BS IEC 62788-5-1 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - 5-1: EDGE SEALS - SUGGESTED TEST METHODS FOR USE WITH EDGE SEAL MATERIALS |
I.S. EN ISO 14692-2:2017
|
PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017) |
I.S. EN 4702-03:2017
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
14/30304058 DC : 0
|
BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ISO 16616:2015
|
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
07/30165210 DC : 0
|
BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
12/30266170 DC : 0
|
BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
17/30349217 DC : 0
|
BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
05/30132990 DC : DRAFT APR 2005
|
ISO 20753 - PLASTICS - TEST SPECIMENS |
UNE-EN ISO 9988-2:2015
|
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
BS EN 1013 : 2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
12/30258011 DC : 0
|
BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES |
03/105579 DC : DRAFT APR 2003
|
ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD |
BS EN 15534-1 : 2014
|
COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
EN 4702-05:2017
|
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
BS ISO 17194:2007
|
Structural adhesives. A standard database of properties |
DIN EN ISO 19069-2:2016-07
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
DD CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
DIN EN ISO 17855-2 E : 2016
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
ISO 20558-2:2018
|
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
UNI CEN ISO/TS 24817 : 2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
ISO 20029-2:2017
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
I.S. EN ISO 7391-2:2006
|
PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ONORM EN ISO 7391-2 : 2006
|
PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNE-EN ISO 20028-2:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
ASTM E 1545 : 2011
|
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
DIN EN ISO 10350-2:2011-06
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
I.S. EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
DIN EN ISO 14530-2:2000-08
|
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
BS EN ISO 15526-2:2004
|
Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 7823-3:2007
|
Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
ISO/TS 24817:2006
|
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
BS EN ISO 14528-2:2000
|
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
BS EN ISO 7823-3:2007
|
Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
ISO 19069-2:2016
|
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
BS EN 14598-2:2005
|
Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
BS EN ISO 1872-2:2007
|
Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
I.S. EN ISO 15526-2:2004
|
PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 13628-2:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN ISO 7391-2:2006-06
|
PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 3167:2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
I.S. EN ISO 15103-2:2007
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 11963:2012
|
Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
DIN EN ISO 11963:2013-03
|
PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
I.S. EN ISO 3673-2:2012
|
PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012) |
DIN EN ISO 1873-2:2000-12
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 15526-2:2004-10
|
PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 7143:2007
|
BINDERS FOR PAINTS AND VARNISHES - METHODS OF TEST FOR CHARACTERIZING WATER-BASED BINDERS |
I.S. EN ISO 7823-3:2007
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
ONORM EN ISO 11403-2 : 2012
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012) |
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
NBR 15708-5 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
DIN EN ISO 20028-2 E : 2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
15/30327856 DC : 0
|
BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
BS EN 4702-03:2017
|
Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
14/30304062 DC : 0
|
BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS ISO 16525-1:2014
|
Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
DIN EN 1013:2015-03
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS EN 16240:2013
|
Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
11/30242905 DC : 0
|
BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS EN ISO 17855-2:2016
|
Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation Methods of test |
15/30328314 DC : 0
|
BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
DIN EN ISO 9988-2 E : 2015
|
PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
PD CEN ISO/TR 22007-5:2014
|
Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
12/30263853 DC : 0
|
BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
BS ISO 3672-2 : 2000 AMD 13326
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
08/30165044 DC : DRAFT FEB 2008
|
BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
11/30238648 DC : DRAFT FEB 2011
|
BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS ISO 11359-1:2014
|
Plastics. Thermomechanical analysis (TMA) General principles |
EN 4702-03 : 2017
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
04/30122412 DC : DRAFT SEP 2004
|
ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES |
ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
PREN 4702-03 : DRAFT 2016
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
DIN EN 16153:2015-05
|
LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
NF ISO 17194 : 2009
|
STRUCTURAL ADHESIVES - A STANDARD DATABASE OF PROPERTIES |
I.S. EN 60455-2:2015
|
RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
I.S. EN 16240:2013
|
LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 17855-2:2016
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
BS EN ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
BS EN ISO 20753:2014
|
Plastics. Test specimens |
SAE J 2642 : 2017
|
RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
EN ISO 7391-2:2006
|
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006) |
EN ISO 20029-2:2018
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) |
ISO 17282:2004
|
Plastics — Guide to the acquisition and presentation of design data |
ISO 14692-2:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
ISO 17194:2007
|
Structural adhesives A standard database of properties |
IEC 62899-201:2016
|
Printed electronics - Part 201: Materials - Substrates |
DIN EN ISO 7143:2007-05
|
Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
DIN EN ISO 3672-2 E : 2002
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 13628-2:2006/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
BS EN 13121-1:2003
|
GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
BS EN ISO 3673-2:2012
|
Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins |
ISO 17855-2:2016
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 13706-2:2002
|
Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
PD IEC/TS 62788-2:2017
|
Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets |
UNE-EN ISO 11403-2:2012
|
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
BS EN ISO 11403-2:2012
|
Plastics. Acquisition and presentation of comparable multipoint data Thermal and processing properties |
DIN EN ISO 3673-2:2012-10
|
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
BS EN ISO 10350-2:2011
|
Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
EN ISO 10350-2:2011
|
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
UNI EN ISO 10350-2 : 2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
UNE-EN ISO 11963:2013
|
Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
ONORM EN ISO 10350-2 : 2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
I.S. EN ISO 10350-2:2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
EN ISO 9988-2:2015
|
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
EN 16240:2013
|
Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
UNI EN ISO 3167 : 2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS |
UNI EN ISO 3673-2 : 2012
|
PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS |
UNI EN ISO 11403-2 : 2012
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES |
UNI EN ISO 11963 : 2013
|
PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
UNI EN ISO 13628-2 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN ISO 7792-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN ISO 14910-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS EN ISO 20029-2:2018
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
12/30263857 DC : 0
|
BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER |
DD CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
BS ISO 16616:2015
|
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
ISO 20753:2008
|
Plastics Test specimens |
BS ISO 11359-3:2002
|
Plastics. Thermomechanical analysis (TMA) Determination of penetration temperature |
I.S. EN ISO 1873-2:2007
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
11/30236286 DC : 0
|
BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
14/30304003 DC : 0
|
BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
I.S. EN ISO 1872-2:2007
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 24817:2017
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
DIN 8061:2016-05
|
UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES - GENERAL QUALITY REQUIREMENTS, TESTING |
ISO 11963:2012
|
Plastics Polycarbonate sheets Types, dimensions and characteristics |
I.S. EN ISO 9988-2:2015
|
PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
05/30128281 DC : DRAFT JAN 2005
|
ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 9988-2:2015-05
|
PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
DIN EN 16240:2014-03
|
LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
DD CEN/TS 15534-2:2007
|
Wood-plastics composites (WPC) Characterisation of WPC materials |
17/30354769 DC : 0
|
BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
14/30256269 DC : 0
|
BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
BS EN ISO 19069-2:2016
|
Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
15/30304408 DC : 0
|
BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN 15534-1:2014
|
COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
API 17J REDLINE : 2008
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
BS IEC 62899-201 : 2016
|
PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
UNI EN ISO 20753 : 2014
|
PLASTICS - TEST SPECIMENS |
I.S. EN ISO 20029-2:2018
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017) |
ISO/TR 15655:2003
|
Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
ISO 11359-3:2002
|
Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature |
DIN EN ISO 20028-2:2015-08 (Draft)
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
I.S. EN 1013:2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
ISO 7823-2:2003
|
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ISO 21138-1:2007
|
Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes, fittings and system |
EN ISO 14692-2:2017
|
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) |
ISO 16525-1:2014
|
Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods |
S.R. CEN/TS 15534-2:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
UNE-EN ISO 14910-2:2014
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
DIN EN ISO 7823-3:2007-08
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
UNE-EN ISO 7792-2:2013
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
DIN EN ISO 14910-2 E : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
DIN EN ISO 3167:2014-11
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
DIN EN ISO 7823-2:2003-12
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
BS EN ISO 7143:2007
|
Binders for Paints and varnishes. Methods of test for characterizing water-based binders |
02/124520 DC : DRAFT DEC 2002
|
EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS |
BS EN ISO 14529-2:2000
|
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
ISO 1873-2:2007
|
Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 1873-2:2007
|
Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 14528-2:1999
|
Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 20028-2:2017
|
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 3672-2:2001
|
Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
ISO 14530-2:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
DIN EN 15334 E : 2007
|
SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT |
IEC 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
BS EN ISO 7823-2:2003
|
Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
ISO 11403-2:2012
|
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties |
ISO 14529-2:1999
|
Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO/TR 22007-5:2011
|
Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
IEC TS 62788-2:2017
|
Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets |
UNE-EN ISO 10350-2:2011
|
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
ISO 3672-2:2000
|
Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
ISO 7823-1:2003
|
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
BS EN ISO 14527-2:2000
|
Preparation of test specimens and determination of properties |
ISO 7792-2:2012
|
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 7823-1:2003
|
Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
BS EN 14598-3:2005
|
Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
ISO 14526-2:1999
|
Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 9988-2:2006
|
Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
UNE-EN 1013:2013
|
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
ISO 3673-2:2012
|
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins |
UNE-EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
BS EN ISO 14526-2:2000
|
Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
DIN EN 15334:2007-05
|
Sanitary appliances - Methacrylic dispersions of high filler content |
EN 15334:2007
|
Sanitary appliances - Methacrylic dispersions of high filler content |
EN ISO 11403-2:2012
|
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
EN ISO 15252-2 : 1999
|
PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 19069-2:2016
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
EN 16153:2013+A1:2015
|
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
EN 14598-2:2005/AC:2006
|
REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
EN ISO 1873-2:2007
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007) |
EN ISO 14529-2 : 1999
|
PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 13706-3:2002
|
Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements |
EN ISO 15526-2:2004
|
Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
EN ISO 3672-2 : 2001
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 10350-1:2017
|
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017) |
EN 13706-2:2002
|
Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
EN ISO 14530-2 : 1999
|
PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 14528-2 : 1999
|
PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 7823-1:2003
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
EN ISO 20028-2:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
EN ISO 17855-2:2016
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
EN ISO 1872-2:2007
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) |
EN ISO 15103-2:2007
|
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) |
EN ISO 3673-2:2012
|
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
EN ISO 14910-2:2013
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
EN ISO 7823-2 : 2003
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
EN 14598-3:2005
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
EN ISO 7792-2:2012
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
EN ISO 7143:2007
|
Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
EN ISO 14527-2 : 1999
|
PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ISO/TS 20328:2016
|
Imaging materials — Lenticular lens sheet — Measurements and specifications of dimensions |
02/121542 DC : DRAFT MAR 2002
|
ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES |
I.S. EN ISO 10350-1:2017
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017) |
13/30238193 DC : DRAFT DEC 2013
|
BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
04/30123435 DC : DRAFT OCT 2004
|
IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
DIN EN ISO 17855-2:2016-06
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
DD ISO/TS 24817 : 2006
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
BS ISO 9988-2 : 2006
|
PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 19069-2 E : 2016
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
07/30169818 DC : 0
|
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS 6782-18(2001) : 2001 AMD 15243
|
BINDERS FOR PAINTS - PART 18: GENERAL METHODS OF TEST FOR WATER-DILUTABLE BINDERS |
I.S. EN ISO 19069-2:2016
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
BS ISO 1268-8:2004
|
Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC |
15/30304402 DC : 0
|
BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN ISO 7823-3:2007
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
UNI EN 1013 : 2015
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS EN ISO 9988-2:2015
|
Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties |
PREN ISO 11963 : DRAFT 2011
|
PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
BS ISO 28078-2:2009
|
Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties |
XP CEN/TS 15534-2 : 2007 XP
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
I.S. EN ISO 14910-2:2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15) |
ISO 12856-1:2014
|
Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics |
I.S. EN 16153:2013
|
LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 20028-2:2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
XP CEN/TS 15534-1 : 2007 XP
|
WOOD-PLASTIC COMPOSITE (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
S.R. CEN TS 15534-1:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
BS EN ISO 10350-1:2017
|
Plastics. Acquisition and presentation of comparable single-point data Moulding materials |
ASTM E 1545 : 2011 : R2016
|
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
ISO 14910-2:2013
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
UNE-EN ISO 20753:2015
|
Plastics - Test specimens (ISO 20753:2008) |
ISO 7391-2:2006
|
Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
S.R. CEN ISO TS 24817:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
DIN EN ISO 7792-2:2013-03
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
DIN EN ISO 11403-2 E : 2013
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012) |
DIN EN ISO 7823-1:2003-12
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
BS EN ISO 15103-2:2007
|
Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN ISO 14910-2:2013
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
ISO 15252-2:1999
|
Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
UNE-EN ISO 3673-2:2013
|
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
ISO 1872-2:2007
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 11963:2012
|
Plastics. Polycarbonate sheets. Types, dimensions and characteristics |
BS EN 15334:2007
|
Sanitary appliances. Methacrylic dispersions of high filler content |
BS EN ISO 7391-2:2006
|
Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 14527-2:1999
|
Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 11359-1:2014
|
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
ISO 15526-2:2000
|
Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 7792-2:2012
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
02/124519 DC : DRAFT DEC 2002
|
EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
BS EN ISO 14530-2:2000
|
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
BS EN ISO 15252-2:2000
|
Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
ISO 7143:2007
|
Binders for paints and varnishes — Methods of test for characterizing water-based binders |
CEN ISO/TR 22007-5:2014
|
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
DIN EN ISO 14910-2:2013-06
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
CEN ISO/TS 24817:2011
|
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
DIN EN ISO 11403-2:2013-01
|
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) |
CEN/TS 15534-2:2007
|
Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |
EN 60455-2:2015
|
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
UNE-EN 16153:2013
|
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |