BS EN 14017 : 2005
Current
The latest, up-to-date edition.
AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
Hardcopy , PDF
English
01-01-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Stability when parked and for manual handling
5.2.1 General
5.2.2 Mounted machines fitted with rollers for
manual handling when dismounted
5.2.3 Machines with adjustable supporting devices
5.3 Distributing components
5.3.1 Swivelling and movable components
5.3.2 Spreading plates and oscillating tubes
5.4 Feeding components guarding
5.5 Loading
5.5.1 Safe access for loading
5.5.2 Boarding means to loading location
5.6 Checking of the hopper contents
5.7 Protection against ejection of fertilizer
5.8 Removal of the spreading device
5.9 Flow rate calibration system
5.10 Hitching and clearance zone
5.11 Noise
5.11.1 Noise reduction as a safety requirement
5.11.2 Verification of requirements on noise based
on noise emission values
6 Verification of the safety requirements and/or protective
measures
6.1 Stability when parked and for manual handling
6.1.1 General
6.1.2 Mounted machines fitted with rollers for manual
handling when dismounted
6.2 Swivelling and movable components
7 Information for use
7.1 Instruction handbook
7.2 Marking
Annex A (informative) - Stability of the tractor distributor
combination
Annex B (informative) - Examples of pictograms
Annex ZA (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive
98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive
2006/42/EC
Bibliography
Describes in conjunction with EN 1553:1999, the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry.
| Committee |
AGE/32
|
| DevelopmentNote |
Supersedes 00/714070 DC. (05/2006) Supersedes 06/30157236 DC. (04/2009) 2005 Edition Re-Issued in August 2009 & incorporates AMD 2 2009. (08/2009)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 14017:2005 | Identical |
| ONORM EN 14017 : SEP 2009 | Identical |
| DIN EN 14017:2009-07 | Identical |
| NBN EN 14017 : 2006 + A2 2009 | Identical |
| EN 14017:2005+A2:2009 | Identical |
| SN EN 14017 : 2005 + A2 2009 | Identical |
| NEN EN 14017 : 2005 + A2 2009 | Identical |
| NF EN 14017 : 2006 + A2 2009 | Identical |
| UNI EN 14017 : 2010 | Identical |
| NS EN 14017 : 2005 + A2 2009 | Identical |
| UNE-EN 14017:2006 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN 13740-2:2003 | Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods |
| EN 13740-1:2003 | Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements |
| EN 13739-1:2011 | Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements |
| EN 1553 : 1999 | AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.