BS EN 14961-1:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solid biofuels. Fuel specifications and classes General requirements
Hardcopy , PDF
31-05-2015
English
31-03-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Classification of origin and sources of solid biofuels
7 Specification of solid biofuels based on traded forms
and properties
Annex A (informative) - Illustrations of typical forms of
wood fuels
Annex B (informative) - Typical values of solid biomass
fuels
Annex C (informative) - Examples of possible causes for
deviant levels for different properties and of
consequences of handling and treatments for the
properties of biomass
Annex D (informative) - Calculation of the net calorific
value at different bases and energy density as
received
Bibliography
Specifies the fuel quality classes and specifications for solid biofuels.
Committee |
PTI/17
|
DevelopmentNote |
Supersedes DD CEN/TS 14961. (03/2010)
|
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This European Standard determines the fuel quality classes and specifications for solid biofuels. According to the mandate given for the standardisation work, the scope of the CEN/TC 335 only includes solid biofuels originating from the following sources: products from agriculture and forestry; vegetable waste from agriculture and forestry; vegetable waste from the food processing industry; wood waste, with the exception of wood waste which may contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coating, and which includes in particular such wood waste originated from construction and demolition waste; fibrous vegetable waste from virgin pulp production and from production of paper from pulp, if it is co-incinerated at the place of production and heat generated is recovered; cork waste. NOTE 1 For the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is “used wood arising from demolition of buildings or civil engineering installations” (prEN 14588). NOTE 2 Aquatic biomass is not included in the scope of this European Standard.
Standards | Relationship |
EN 14961-1:2010 | Identical |
CEN/TS 15210-2:2005 | Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes |
EN 15103:2009 | Solid biofuels - Determination of bulk density |
CEN/TS 15104:2005 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
CEN/TS 15370-1:2006 | Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method |
CEN/TS 15290:2006 | Solid Biofuels - Determination of major elements |
CEN/TS 15150:2005 | Solid biofuels - Methods for the determination of particle density |
EN 15148:2009 | Solid biofuels - Determination of the content of volatile matter |
EN 15210-1:2009 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
CEN/TS 15105:2005 | Solid biofuels - Methods for determination of the water soluble content of chloride, sodium and potassium |
EN 14918:2009 | Solid biofuels - Determination of calorific value |
EN 14774-2:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method |
EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
CEN/TS 15149-2:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
PREN 14588 : DRAFT 2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
CEN/TS 15296:2006 | Solid Biofuels - Calculation of analyses to different bases |
EN 14775:2009 | Solid biofuels - Determination of ash content |
CEN/TS 15234:2006 | Solid biofuels - Fuel quality assurance |
CEN/TS 15149-1:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above |
CEN/TS 15297:2006 | Solid Biofuels - Determination of minor elements |
EN 14774-1:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
EN 14774-3:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample |
CEN/TS 15289:2006 | Solid Biofuels - Determination of total content of sulphur and chlorine |
CEN/TS 14780:2005 | Solid biofuels - Methods for sample preparation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.