BS EN 15208:2014
Current
The latest, up-to-date edition.
Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
Hardcopy , PDF
English
31-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Aims (functions) of SPDS
5 Functionality
6 Design characteristics
7 Tests
8 Marking
9 Installation, operating and maintenance recommendations
Annex A (normative) - DTMQ guide using smart card
Annex B (normative) - PID protocol
Annex C (normative) - Correspondence system
Annex D (informative) - Mechanical endurance test apparatus
Bibliography
Applies to sealed parcel delivery systems used with transport tanks and specifies the performance requirements, critical safety aspects, data transfer methods between loading gantries and transport tank, transport tank and delivery points, other optional communications and tests to provide functional and compatible systems.
| Committee |
AUE/18
|
| DevelopmentNote |
Supersedes 05/30132851 DC. (05/2007) Supersedes 12/30261228 DC. (05/2014)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard is applicable to sealed parcel delivery systems used with transport tanks and specifies the performance requirements, critical safety aspects, data transfer methods between loading gantries and transport tank, transport tank and delivery points, other optional communications and tests to provide functional and compatible systems.
Sealed parcel delivery systems covered by this European Standard is for bottom loaded transport tanks.
The systems specified by this European Standard are suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
| Standards | Relationship |
| I.S. EN 15208:2014 | Identical |
| EN 15208:2014 | Identical |
| NS EN 15208 : 2014 | Identical |
| NBN EN 15208 : 2014 | Identical |
| UNI EN 15208 : 2014 | Identical |
| NF EN 15208 : 2014 | Identical |
| NEN EN 15208 : 2014 | Identical |
| DIN EN 15208:2014-07 | Identical |
| EN 13922:2011 | Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
| EN 15207:2014 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| EN 13083:2008+A1:2013 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| EN 13308:2002 | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| EN 14025:2013+A1:2016 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO/IEC 7816-2:2007 | Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 13314:2002 | Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
| ISO/IEC 7816-4:2013 | Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange |
| ISO/IEC 7816-3:2006 | Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols |
| EN 14596:2005 | Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
| EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| EN 13317:2002+A1:2006 | Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
| EN 13316:2002 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| EN 13082:2008+A1:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| EN 14116:2012+A1:2014 | Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.