BS EN 15234-1:2011
Current
The latest, up-to-date edition.
Solid biofuels. Fuel quality assurance General requirements
Hardcopy , PDF
English
31-03-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Quality assurance and quality control measures
7 Product declaration of fuel quality and labelling
Annex A (informative) - Examples of product declarations
Annex B (informative) - Overview of properties being
specified in EN 14961-1
Bibliography
Specifies the procedures to fulfil the quality requirements (quality control) and describes measures to ensure adequate confidence that the biofuel specification is fulfilled (quality assurance).
Committee |
PTI/17
|
DevelopmentNote |
Supersedes DD CEN/TS 15234 and 10/30219009 DC. (04/2011)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard defines the procedures to fulfil the quality requirements (quality control) and describes measures to ensure adequate confidence that the biofuel specification is fulfilled (quality assurance). This European Standard covers the whole chain, from supply of raw materials to point of delivery to the end-user. According to the mandate given for the standardisation work, the scope of the CEN/TC 335 only includes solid biofuels originating from the following sources: - products from agriculture and forestry; - vegetable waste from agriculture and forestry; - vegetable waste from the food processing industry; - wood waste, with the exception of wood waste which may contain halogenated organic compounds or heavy metal as a result of treatment with wood preservatives or coating, and which includes in particular such wood waste originated from construction and demolition waste; ? fibrous vegetable waste from virgin pulp production and from the production of paper from pulp, if it is co-incinerated at the place of production and heat generated is recovered; ? cork waste. NOTE 1 The quality assurance systems applied to the operation of conversion plants fuelled by solid biofuels are outside the scope of this European Standard. NOTE 2 Health, safety and environmental issues for solid biofuels are important and need special attention, however they are outside the scope of this European Standard. NOTE 3 For the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is defined as “used wood arising from demolition of buildings or civil engineering installations?? (EN 14588:2010, 4.52). NOTE 4 The biofuels covered by this European standard are identical to the fuels exempted from the Directive 2000/76/EC [Article 2.2 a) from i) to v)] on incineration of waste. NOTE 5 Aquatic biomass is not included in the scope of this European Standard.
Standards | Relationship |
EN 15234-1:2011 | Identical |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
EN 14961-1:2010 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
PREN 15234-2 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
PREN 15234-4 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
EN 14961-2:2011 | Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
PREN 15234-5 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
EN 14961-4:2011 | Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use |
PREN 15234-6 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
EN 14961-3:2011 | Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use |
PREN 14961-6 : DRAFT 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON WOODY PELLETS FOR NON-INDUSTRIAL USE |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
PREN 14780 : DRAFT 2010 | SOLID BIOFUELS - SAMPLE PREPARATION |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 14961-5:2011 | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.