Skip to content
Please enter a keyword to search

  • BS EN 15316-4-8:2017

    Current The latest, up-to-date edition.

    Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  22-06-2017

    Publisher:  British Standards Institution

    Add To Cart

    Scope - (Show below) - (Hide below)

    This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardize the: - required inputs; - calculation method; - resulting outputs, for space heating generation by: - air heating systems, including control; - overhead radiant heating systems for non-domestic use, including control; and - stoves and local heaters for residential use. This standard does not apply to heating systems that utilize water as a heat transfer medium. Other heat generation systems such as boilers, heat pumps and others are covered in other sub modules of M3-8. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000-1. NOTE 1 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

    General Product Information - (Show below) - (Hide below)

    Committee RHE/24
    Development Note Supesedes 14/30309957 DC. (07/2017)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS PAS 2030(2012) : 2012 IMPROVING THE ENERGY EFFICIENCY OF EXISTING BUILDINGS - SPECIFICATION FOR INSTALLATION PROCESS, PROCESS MANAGEMENT AND SERVICE PROVISION

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 416-2:2006 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy
    PREN 16510-1 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    EN 13229:2001/A2:2004/AC:2007 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    CEN/TS 16629:2014 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards
    EN 419-2:2006 Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy
    EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards
    EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
    EN 13240:2001/A2:2004/AC:2007 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
    EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
    EN 1196:2011 Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters
    ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
    EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
    PREN 16510-2-6 : DRAFT 2014 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-6 APPLIANCES FIRED BY WOOD PELLETS
    EN 13410:2001/AC:2002 GAS-FIRED OVERHEAD RADIANT HEATERS - VENTILATION REQUIREMENTS FOR NON-DOMESTIC PREMISES
    PREN 16510-2-2 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-2: INSET APPLIANCES INCLUDING OPEN FIRES
    PREN 16510-2-1 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-1: ROOMHEATERS
    EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    EN 15316-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5
    EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
    EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
    EN 15250:2007 Slow heat release appliances fired by solid fuel - Requirements and test methods
    EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
    EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
    CEN/TR 15316-6-9:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8
    ISO 7345:1987 Thermal insulation Physical quantities and definitions
    EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
    2009/125/EC : 2009 AMD 1 2012 DIRECTIVE 2009/125/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 21 OCTOBER 2009 ESTABLISHING A FRAMEWORK FOR THE SETTING OF ECODESIGN REQUIREMENTS FOR ENERGY-RELATED PRODUCTS (RECAST) (TEXT WITH EEA RELEVANCE)
    EN 419-1:2009 Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective