BS EN 15651-1:2017
Current
The latest, up-to-date edition.
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements
Hardcopy , PDF
English
06-09-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Durability
6 Sampling
7 Assessment and verification of constancy
of performance
8 Marking and labelling
Annex A (informative) - Example on the frequency
of tests for factory production control
Annex ZA (informative) - Relationship of this
European Standard with Regulation (EU)
No.305/2011
Bibliography
This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction,including the interior face.
| Committee |
B/547
|
| DevelopmentNote |
Supersedes 07/30163072 DC. (03/2010) Supersedes 12/30254132 DC. (09/2012)
|
| DocumentType |
Standard
|
| ISBN |
9780539023121
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face. NOTE Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in interior walls and/or partitions and to oil-based mastics.
| Standards | Relationship |
| EN 15651-1:2017 | Identical |
| BS 6093(2006) : 2006 | DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| 13/30277948 DC : 0 | BS 6093:2006+A1 - DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 6927:2012 | Buildings and civil engineering works Sealants Vocabulary |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| EN ISO 7390:2003 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003) |
| EN ISO 9046:2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
| ISO 7389:2002 | Building construction Jointing products Determination of elastic recovery of sealants |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 10590:2005 | Building construction Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| ISO 11600:2002 | Building construction Jointing products Classification and requirements for sealants |
| ISO 7390:2002 | Building construction Jointing products Determination of resistance to flow of sealants |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 10591:2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN ISO 10590:2005 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling |
| ISO 10591:2005 | Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| ISO 13640:1999 | Building construction Jointing products Specifications for test substrates |
| EN ISO 6927:2012 | Buildings and civil engineering works - Sealants - Vocabulary (ISO 6927:2012) |
| ISO 9046:2002 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| EN ISO 8340:2005 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.